Sneak peek at the newest MEAN end of summer release.
Жүктеу.....
Пікірлер: 60
@darthinformus21556 жыл бұрын
A huge step forward in modularity for the AR platform. I like how the front portion of the insert serves as a feed ramp, it may end up being even more reliable than any other option for shooting 9mm from an AR.
@Shintenzu6 жыл бұрын
If street price is around $20, i'll forever say goodbye to 9mm lowers. I also recommend selling the completed magazine. I'd pay $30 for one easy.
@MrToddRH6 жыл бұрын
Awesome product for flexibility and options for the various AR platforms. Please make a 40rd P-mag conversion for competition PCC guys.
@the-not-bigkuhrbowsky48695 жыл бұрын
two thumbs way up cause of go fast mode!!! mad props for innovation etc, i digit!!
@DryFireNinja6 жыл бұрын
Pre-ordered! Will see if I can bubba it to work in 40rnd-er. Please add a 40rnd option for USPSA PCC division (which is HUGE & requires 32rnds to complete a stage often). 9mm lowers/blocks are expensive and/or unreliable and a lot of competitors would buy a lot of EndoMags, if they would work in 40rnder.
@ToxicSocietyTroll5 жыл бұрын
Cool idea, I might purchase if the price comes down.
@10mmlover6 жыл бұрын
Whoa. Please bring out a 10 round version.
@MEANARMS
6 жыл бұрын
We always try to never leave a state behind! The product is actually shipped as a 10 round unit and the customer can choose to have 15, 20 or 30 rounds by cutting the round capacity limiter at pre-marked locations on the limiter. In the video we show the full 30 round capacity. We will be releasing a more detailed promo video soon that will better show how this device begins as a 10 rounder and how to cut it to fit 15, 20, or 30 rounds, depending on your state’s magazine compliance laws.
@x5060
6 жыл бұрын
That is a really smart Idea.
@markshutt60006 жыл бұрын
Awesome stuff! Any future plans for a .45 conversion?
@pookiedoodle20026 жыл бұрын
What length barrel was on the foxtrot upper? Also what buffer and spring were used? I want to do an 8.5 inch foxtrot and am curious what buffer set up I should run.
@feelthepayne886 жыл бұрын
You have my interest.... What uppers is it compatible with?
@kenedy4life6 жыл бұрын
make one compatible with the p40 mags and I am ready for you to take my money!
@TheGunCollective6 жыл бұрын
Does this essentially eliminate the need for a magwell adapter block?
@MEANARMS
6 жыл бұрын
That is correct, no need for an adapter block. Use your standard AR lower with a 9mm upper of your choice. You will be able to train and maintain muscle memory using your 30 round Pmag magazine body instead of the small Glock style magazine. The product is shipped as a 10 round unit and the customer can choose to have 15, 20 or 30 rounds by cutting the round capacity limiter at marked locations. It also maintains last round bolt hold open function as some other solutions do not. As with all Mean products it has a Lifetime Warranty. The product is Patent Pending and will be released in late August of 2018.
@TheGunCollective
6 жыл бұрын
Thanks for the intel! I'll most likely be featuring this on TGC News in the not so distant future.
@ceronv
6 жыл бұрын
MEAN ARMS how bout bolt carrier
@3novacane4 жыл бұрын
Oh Shit. NICEEEEE!
@havoc12306 жыл бұрын
Hmm interesting, makes you wonder if it could be adapted for .45 acp, 7.62x25, 40MM, etc....
@bigguy64396 жыл бұрын
I checked your website. It doesn’t say if it’s the complete magazine or just the spring?
@michaeldanielsG196 жыл бұрын
How does this eject properly? Almost all 9mm conversions have an ejector on the Block conversion. Do not see anything about installing an ejector or anything else. Please explain @MEANARMS
@MEANARMS
6 жыл бұрын
The ejector is incorporated into the EndoMag™. Slide the EndoMag™ into your 30 round PMAG® magazine housing, lock it in place with the base plate and you are ready to run.
@numbaoneUFCfan
6 жыл бұрын
I was thinking the same thing...…….what about ejection?
@EvanDickersonM81
5 жыл бұрын
at 00:56 you can see it built into the mag.
@dangallen383
5 жыл бұрын
Is the ejector made of steel? or plastic?
@MinimalistMotoLife5 жыл бұрын
Any plans for a 6.8 SPC to 40/10mm endomag?
@FerdieRamos336 жыл бұрын
wow more info need, price? works with standard 9mm ar upper? etc
@bigguy64396 жыл бұрын
Does the spring kit work on a aluminum. Magazine?
@Izzy2356346 жыл бұрын
Me wants NOW!!!
@johnsmith46305 жыл бұрын
BUT DOES IT WORK W/ GLOCK MAGS?
@bigguy64395 жыл бұрын
Will it work on any magazine body like aluminum or hex
@deesnutz420695 жыл бұрын
will it only work with magpul pmags? or will any ol' AR pmags work?
@brixalpha6 жыл бұрын
Any idea of a price point?
@owow7644 жыл бұрын
working on a 5.7 version?
@9milli4u466 жыл бұрын
How many rounds is the endo mag good for?
@aaronsmith56005 жыл бұрын
Are they released yet?
@Brian-gj5xm4 жыл бұрын
Why is it those 9mm rounds look so long?
@bigguy64395 жыл бұрын
Is going to be a bitch to get in California that hasn’t bin super glued and rivot
@destruxxx6 жыл бұрын
Will this work with a 9MM direct impingement upper?
@sweatmachine69
6 жыл бұрын
There are no DI 9mm uppers.
@destruxxx
6 жыл бұрын
@@sweatmachine69 they're not common but they exist. I have one. There is plenty of info on AR15.com about them. There's also a few videos on here about them.
@bigguy64396 жыл бұрын
How much
@thegreatmrfu6 жыл бұрын
which upper was used ?
@brixalpha
6 жыл бұрын
thegreatmrfu it's a Foxtrot Mike upper
@caseygiron726 жыл бұрын
What's the BCG ?
@MEANARMS
6 жыл бұрын
In this video we used a Foxtrot Mike Glock 9mm upper assembly.
@hakanortabag6 жыл бұрын
Ammunition is not 9x19 mm as far as I can see. Because how can the weapon barrel's 5.56 mm, 9 mm ammunition be cast?
@richardholle1332
6 жыл бұрын
9mm upper.
@MEANARMS
6 жыл бұрын
Yes, this is 9x19 ammunition. This is a standard 5.56 lower with a 9mm upper assembly.
@daslage70675 жыл бұрын
Have you guys even tested your own products for long term reliability? Your Ejectors are molded out of plastic. A 9mm casing will destroy that ejector over time. heck mine lasted 2 reloads. I spent 50.00 for the 10 round mag hoping it was a good product, Boy was I wrong. who's the idiot to thank for plastic ejectors? Heck even a 10/22 mag has its ejectors machined out of stainless steel. Rebuild your injection mould and accommodate it to accept a stainless steel insert as a replacement for your ejector.
@MEANARMS
5 жыл бұрын
Thank you for your feedback David. Yes, we do extensive internal testing and have multiple EndoMags with 6,000 plus rounds with zero issues. We are sorry you are having issues with durability. Please send photos of the damaged EndoMags to support@meanarms.com and we will be glad to help.
@Camaro45th6 жыл бұрын
So you can use the same magazines as your .223/ 5.56? Seems like an odd invention but OK
@StaticFilter
6 жыл бұрын
Joe Randazzo this way you can use a standard AR15 lower instead of a 9mm only lower that takes glock or other handgun mags.
@andykruth
6 жыл бұрын
Odd? Its fucking brilliant
@E52O4
6 жыл бұрын
What's the price point? If it's less than $30 per copy ($25 for four? ) I'd be happy to get in line.
Пікірлер: 60
A huge step forward in modularity for the AR platform. I like how the front portion of the insert serves as a feed ramp, it may end up being even more reliable than any other option for shooting 9mm from an AR.
If street price is around $20, i'll forever say goodbye to 9mm lowers. I also recommend selling the completed magazine. I'd pay $30 for one easy.
Awesome product for flexibility and options for the various AR platforms. Please make a 40rd P-mag conversion for competition PCC guys.
two thumbs way up cause of go fast mode!!! mad props for innovation etc, i digit!!
Pre-ordered! Will see if I can bubba it to work in 40rnd-er. Please add a 40rnd option for USPSA PCC division (which is HUGE & requires 32rnds to complete a stage often). 9mm lowers/blocks are expensive and/or unreliable and a lot of competitors would buy a lot of EndoMags, if they would work in 40rnder.
Cool idea, I might purchase if the price comes down.
Whoa. Please bring out a 10 round version.
@MEANARMS
6 жыл бұрын
We always try to never leave a state behind! The product is actually shipped as a 10 round unit and the customer can choose to have 15, 20 or 30 rounds by cutting the round capacity limiter at pre-marked locations on the limiter. In the video we show the full 30 round capacity. We will be releasing a more detailed promo video soon that will better show how this device begins as a 10 rounder and how to cut it to fit 15, 20, or 30 rounds, depending on your state’s magazine compliance laws.
@x5060
6 жыл бұрын
That is a really smart Idea.
Awesome stuff! Any future plans for a .45 conversion?
What length barrel was on the foxtrot upper? Also what buffer and spring were used? I want to do an 8.5 inch foxtrot and am curious what buffer set up I should run.
You have my interest.... What uppers is it compatible with?
make one compatible with the p40 mags and I am ready for you to take my money!
Does this essentially eliminate the need for a magwell adapter block?
@MEANARMS
6 жыл бұрын
That is correct, no need for an adapter block. Use your standard AR lower with a 9mm upper of your choice. You will be able to train and maintain muscle memory using your 30 round Pmag magazine body instead of the small Glock style magazine. The product is shipped as a 10 round unit and the customer can choose to have 15, 20 or 30 rounds by cutting the round capacity limiter at marked locations. It also maintains last round bolt hold open function as some other solutions do not. As with all Mean products it has a Lifetime Warranty. The product is Patent Pending and will be released in late August of 2018.
@TheGunCollective
6 жыл бұрын
Thanks for the intel! I'll most likely be featuring this on TGC News in the not so distant future.
@ceronv
6 жыл бұрын
MEAN ARMS how bout bolt carrier
Oh Shit. NICEEEEE!
Hmm interesting, makes you wonder if it could be adapted for .45 acp, 7.62x25, 40MM, etc....
I checked your website. It doesn’t say if it’s the complete magazine or just the spring?
How does this eject properly? Almost all 9mm conversions have an ejector on the Block conversion. Do not see anything about installing an ejector or anything else. Please explain @MEANARMS
@MEANARMS
6 жыл бұрын
The ejector is incorporated into the EndoMag™. Slide the EndoMag™ into your 30 round PMAG® magazine housing, lock it in place with the base plate and you are ready to run.
@numbaoneUFCfan
6 жыл бұрын
I was thinking the same thing...…….what about ejection?
@EvanDickersonM81
5 жыл бұрын
at 00:56 you can see it built into the mag.
@dangallen383
5 жыл бұрын
Is the ejector made of steel? or plastic?
Any plans for a 6.8 SPC to 40/10mm endomag?
wow more info need, price? works with standard 9mm ar upper? etc
Does the spring kit work on a aluminum. Magazine?
Me wants NOW!!!
BUT DOES IT WORK W/ GLOCK MAGS?
Will it work on any magazine body like aluminum or hex
will it only work with magpul pmags? or will any ol' AR pmags work?
Any idea of a price point?
working on a 5.7 version?
How many rounds is the endo mag good for?
Are they released yet?
Why is it those 9mm rounds look so long?
Is going to be a bitch to get in California that hasn’t bin super glued and rivot
Will this work with a 9MM direct impingement upper?
@sweatmachine69
6 жыл бұрын
There are no DI 9mm uppers.
@destruxxx
6 жыл бұрын
@@sweatmachine69 they're not common but they exist. I have one. There is plenty of info on AR15.com about them. There's also a few videos on here about them.
How much
which upper was used ?
@brixalpha
6 жыл бұрын
thegreatmrfu it's a Foxtrot Mike upper
What's the BCG ?
@MEANARMS
6 жыл бұрын
In this video we used a Foxtrot Mike Glock 9mm upper assembly.
Ammunition is not 9x19 mm as far as I can see. Because how can the weapon barrel's 5.56 mm, 9 mm ammunition be cast?
@richardholle1332
6 жыл бұрын
9mm upper.
@MEANARMS
6 жыл бұрын
Yes, this is 9x19 ammunition. This is a standard 5.56 lower with a 9mm upper assembly.
Have you guys even tested your own products for long term reliability? Your Ejectors are molded out of plastic. A 9mm casing will destroy that ejector over time. heck mine lasted 2 reloads. I spent 50.00 for the 10 round mag hoping it was a good product, Boy was I wrong. who's the idiot to thank for plastic ejectors? Heck even a 10/22 mag has its ejectors machined out of stainless steel. Rebuild your injection mould and accommodate it to accept a stainless steel insert as a replacement for your ejector.
@MEANARMS
5 жыл бұрын
Thank you for your feedback David. Yes, we do extensive internal testing and have multiple EndoMags with 6,000 plus rounds with zero issues. We are sorry you are having issues with durability. Please send photos of the damaged EndoMags to support@meanarms.com and we will be glad to help.
So you can use the same magazines as your .223/ 5.56? Seems like an odd invention but OK
@StaticFilter
6 жыл бұрын
Joe Randazzo this way you can use a standard AR15 lower instead of a 9mm only lower that takes glock or other handgun mags.
@andykruth
6 жыл бұрын
Odd? Its fucking brilliant
@E52O4
6 жыл бұрын
What's the price point? If it's less than $30 per copy ($25 for four? ) I'd be happy to get in line.
Too much
NOT an AR-15. Please be precise.