Good informative video - exactly what I was looking for. Just ordered some and didn't see the listing say "10 round" was like DANG IT. But then I see they can be adapted for 30 and life is good again.

Bought a 3 pack myself. Took to the range yesterday. Shot 300+ rounds though them using PSA G9 Hybrid bolt. Worked great, but I did have 2 instances of the bolt locking back with 1 round remaining out of the same magazine. Shot reloads of 124 FMJ, 124 JHP, 147 FMJ and factory Aguila 115. Had a great range session except for experiencing my first squib load with a 147 load. Been reloading for 8 years and never had this happen. Scary, but they say in reloading those who have experienced the squib, and those that will. Just glad I noticed the failure and didn't try firing another round w/o checking the bore.

Got mine ,took them out ,put them in a lower, with a slidefire stock,had no issues,other than blowback dirty up the front of the mags,endo mag ran great.

@TacticalDev

5 жыл бұрын

Great to hear!!!!

@merrittjohnson3520

3 жыл бұрын

what buffer did you run ?

@shannonroberts7624

3 жыл бұрын

@@merrittjohnson3520 at the time standard ar-15 carbine buffer. I cant remember what i run now , im thinking i bought the 7oz buffer , its been awhile. Im getting ready to get a lower just for these mags, already have an upper waiting.

@merrittjohnson3520

3 жыл бұрын

@@shannonroberts7624 same here Got the 9mm faxon upper Building lower tho

Great job! very precise info.. I have two of these coming for my PSA 4 inch 9 mm upper. Now, have had the opportunity of watching your video I am ready to lock and load …Thanks again Tc from Nevada

I came here to see if the 3RD Gen pmag widow would show the rounds..It does! I have only used a 2nd Gen P-MAG and this works great after you buy a heavy buffer and spring from an AR10.

Mine just shipped! Cant wait to try on my psa 8 inch upper with psa hybrid 🔩!!!!

I'm still waiting for my endomags. Can't wait to get my hands on it. My 16 inch and 10.5 inch uppers are eagerly waiting to test it.

@TacticalDev

5 жыл бұрын

Yeah now I have to figure out what to build for these!! 10” sounds good!

@ianjay3794

5 жыл бұрын

@@TacticalDev i already have 2 uppers ready, a 16 inch and a 10.5 inch :)

@TacticalDev

5 жыл бұрын

just got an upper and lower set now getting a 8.5" barrel and 10" hand guard....

@sallutz

5 жыл бұрын

Nice. I just got 3 of these endomags and going to use them on a 4.5” 9mm upper I’m building. Just purchased a side charging upper from gibbzarms for the build. Can’t wait to try out the endo’s.

@limitlesssupermoto

4 жыл бұрын

How do you like your 16"? Stuck waiting like 2 weeks for mine thanks to Washington laws

They need a 40-round PMAG version for people doing PCC competitions. When others are running 33 to 40+ round Glock mags, 29 rounds in a PCC is falling behind. I say 29 because the Endomag with 30-rounds wont lock in place with the bolt closed.

Ugh. and here I am with a completed 9mm waiting on mine......

@TacticalDev

5 жыл бұрын

trade? ..haha ahhh!

interesting. more options for 9mm AR uppers... oem Colt style, Glock, Beretta & now this...

And they have last round bolt catch!

You are supposed to get the feed lips to click out over the pmag lips.

@TacticalDev

5 жыл бұрын

I believe so. But check the manufacturers site for specifics

I have been wo dering why if they can make a mag for the 22 to fit a standard why not make one for the 9mm or any other pistol caliber ammo

Lol same bro don’t have a upper and just got my package a day or so ago.

@TacticalDev

5 жыл бұрын

Yeah might have something this week....😬

Any update on this one?

Have you built one yet ? Using the Endomag

I didn't see any provision for an ejector. Did I miss something?

@lyleboliou4015

5 жыл бұрын

Kevin S uses the cmmg delay radial blow back banshee upper so the bolt has the ejector and extractor

I just got mine, have you tested yours yet? Update please!

On the unboxing for the first mag I didn’t see you cut anything to make it to 30 rounds. It came like that or you did it before recording?

@TacticalDev

4 жыл бұрын

Yeah I cut it...

@polduseri909

4 жыл бұрын

Tactical Dev Thanks for your honesty. Btw, I always wanted to build a dedicated AR9 and after making some numbers, the Endomag will save me to buy a dedicated lower receiver, which I understand, I will have to select between 3 different and incompatible lowers: Colt, Glock & CCMG. For now, it’s my first time I am concentrating in building the upper first to my specifications, because the Endomag changed everything.

Feed lips catches on my bcg Doesn't seem to work with my build. Maybe file it down? Anyone else have this issue?

@TacticalDev

5 жыл бұрын

Just finished my ar9 build. Mine cycles manually but will test fire it on Saturday and put a new video up.

@FullBlownRedneck

5 жыл бұрын

Check out this video from Mean Arms, it's about break in procedures for the Endomags, it mentions this exact issue. kzread.info/dash/bejne/fqVqu5N_YZundaQ.html

@TacticalDev

5 жыл бұрын

thanks!!!! @@FullBlownRedneck

Will it work on usgi aluminum magazine

@TacticalDev

5 жыл бұрын

No it only works on PMAG G2 & G3

Ejector built into Endomag is a flawed design and potentially deadly. You should never have to fish a round out with your finger to unload an AR riffle. Mean Arms is going to get sued out of existence after someone is killed by an accidental discharge. Sure proper handling is the shooter’s responsibility, but I wouldn’t want the liability

@TacticalDev

5 жыл бұрын

Interesting...let’s see how this unfolds

@rudycockrell655

5 жыл бұрын

It's a training issue. Their actual video says you have to train to work the charging handle and make sure the chamber is clear before ejecting the magazine. I definitely see your point though. It was a major concern of mine when I first saw the videos

For me, they are total garbage and a waste of $$. Didn't work properly at all.