My bro……. A vise….. genius of occam, thank you so much for stepping me forward

Thank you . I learnt how to do it now because of you 👍

@DesertShedStudio

3 ай бұрын

Glad I could help.

The key is this IDC connector, which is very convenient

Simple and effective. Worked perfectly.

exactly what I was looking for. thanks for posting

@DesertShedStudio

5 ай бұрын

@ddra4126 I am glad you found this video helpful.

Perfect! Thank you.

@DesertShedStudio

4 ай бұрын

Glad it helped!

I had no idea it would be this simple. Just made a Tayda order and gonna use your technique asap Thx 👍

@DesertShedStudio

3 ай бұрын

Your welcome, I am glad you found this video useful. 👍

Saved me some cash with with the vise tip.

@DesertShedStudio

3 ай бұрын

Always happy to hear my tips / videos are useful. Thanks 👍.

Thank you!

Excelente.

@DesertShedStudio

3 ай бұрын

Thanks 👍.

Thanks!

@DesertShedStudio

3 ай бұрын

Your welcome 👍.

thank you

@DesertShedStudio

11 ай бұрын

You're welcome.

Need for speed, USB-type-C hub making with STP(UTP) and bench-vice.

@engchoontan8483

4 ай бұрын

The factories went to everything - one-big-piece, multi-layer PCB. Imma going to suggest old-school luxury trouble-shooting and cable yanking, excess cable in hub, crimp no-splice no-SMT, no bread board. Inline "PCB" and flexible, is old harddisk 40pin or 80pin cable select. Nowadays they hype serial-comms signalling and flexible-PCB and organic-LED and ... Nevermind.

@engchoontan8483

4 ай бұрын

One piece mobile phone board need separate piece for outside connector to avoid transferring lever-effect torque and break main board. Things were more sensible in the past. Separate lever-effect. Nowadays they bread-board to break-board. Flex cable in-between big small PCB was genius.

i was actually searching how to get the wires in teh cable for smaller ones like laptop ribbon p/s

Thanks for the tutorial. One question, I need to connect my motherboard to a programmer, the mobo has 9 pins while the programmer has 8 pin. Do I need a custom cable? or a 10 pin idc would work?

@DesertShedStudio

Жыл бұрын

I often connect mismatched headers with ribbon cable ( 25 pin DB to 26 pin IDC for example), ignoring the unused pins. As long as the number one pins align, not all pins of a connector have to be used/wired. Just double check your pinout on each header. The ribbon cable can be pulled apart at the ends if you need to change the pin order as well. 👍

Can i make 4 pin plastic ribbon for car over head lights i broke the og

Wonderful🎉❤....I have one question.....in frc cable which side is positive and which side is negative.....plss tell something

@DesertShedStudio

3 ай бұрын

For ribbon cable, the red conductor is pin-1/conductor-1. Positive and negative pinout will depend on your board and project. Make sure to follow the manual and data sheet for your specific hardware.