Please show us rotation speed with same voltage in different motors.

Rất tuyệt vời, cảm ơn bạn

Is that can be used on cycle, How should i find 12 or 24 volt motor

NIcely done I would say, really nice.

Maravilloso! Gracias. Thanks. Merci. 🙂🙏🏻💚

I would be interested in relative max. output power of the 3 types or any other data that differentiates them in order to answer the question: why bother with more stators/winding/complexity?

@Suzuki_Hiakura

8 ай бұрын

The relative max output power would always be limited, most definitely by the magnets. They will only attract up to a certain point; the magnets are pulled by the electromagnetic properties of the coils, but while electromagnets can be given more power, regular magnets will have a finite limit on power. The stator is the entire part of the motor that has the coil windings, so I assume you were referring to the coil windings in your question. More coils will essentially increase the amount of magnets that can pull the permanent (neodymium) magnets. More windings will increase the voltage that can go through it, which would increase the rpm of it. A thicker cable would increase the maximum amperage and overall torque of the motor. Unsure what you meant about complexity though. Did you mean why multiple coils are continued across the stator? Knowing the gauge of the wire, the number of turns, the number of coils, and the control board's output should be able to give an approximate relative max output power of the three types of motors, but that’s about it.

It was a really nice and productive video, thank you.

Excuse me, can you use the XR-105 controller?

Wow amazing video bro👍👍💖

Excellent 🌹🌹🌹🌹🌹👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

What kind of rpm are you getting on this thing

Input volt ??? And rpm ? 😊 thanks bro😊❤

Why not use iron steel spacers to amplify your windings.. Of course silicon steel is better or ferrite for the HF

@satyakiduttaroy7081

2 ай бұрын

Guess optimum balance for motor weight and thrust ratio

wow emezing

Did you check the rpm and thrust of it? If possible check and revert back

Thanks your video👍

Amazing 😮

It's not a DC motor. What comes out of the ESC to drive it?

@tiger_boi826

10 күн бұрын

Its actually pulsating DC

Good perfect successful project

👌👌👌👌bahot khub

Which one is Higher RPM.

Hi, Will this motor work with 20A ESC and a servo controller? I replicated this motor with six pole BLDC but is not working with this ESC or should I use only 12V - 36V same controller that you are using? Can you guide me on this please.

@reallifework1375

8 ай бұрын

did you buy the coil from the description he gave he is a liar we need to use enamelled insulation copper coil but he gave without insulation in the description

So I this case Teslas 3 6 9 applies to motor scaling the number of coils.

da para fazer aeromodelo com esses motores?

Nice video But plz add diagram of coils connections

Is it 12 volt or 24 volt, if I make a round of 60 turns not 40 , what happen then how much battery volt I need to run this.

Cool 😎

Awesome project! Thank you for your inspiration! Is there a difference in power, rpm, performance between the 3 pole vs 9? Thank-you again and keep them coming!

@mohammedk5573

2 жыл бұрын

absolutely but the wire turns got a different as well

@bongobarta1908

6 ай бұрын

@@mohammedk5573 wht will be the ratio of number of pole and number of coil turn?

Number 3 can be used on Cycle Motor? Can you make a vedio With a Running cycle?

Почему нас учили что статор мотается только на железе Э305 , а тут голимый пластик и работает , конечно хар-ки будут другие , но это и на порядок дешевле чем из железа

À entendre y me semble le 6bobine 4aimant le mieux adapté au régulateur

This motor can work as a power generator at the same time or another type of winding is needed

@mohamedsamy1431

Жыл бұрын

This motor converts electrical energy to mechanical energy. To generate energy, you need another source of energy. Don't forget about the law of conservation of energy.

@robinhooper7702

2 ай бұрын

Yes you can

How many turns have you used

the rotation of the field with the 9 pole motor is the slowest with high torque, the six is in the middle and the 3 is the fastest with low torque.

@MrStrocko

9 күн бұрын

Истину глаголишь , сын мой ! (с) А ещё у резистора два конца , а у потенциометра три , во как !

Epic video, very nice design and process, i will be using this to make one

@awaitingthetrumpetcall4529

4 ай бұрын

I agree. Since I don't have a CNC I'll have to use a compass, right angle square and a dremel tool to make the stator.

@minetest-dog-of-war-server

4 ай бұрын

@@awaitingthetrumpetcall4529 Accuracy is key... To make a functional motor is a useful skill.

@awaitingthetrumpetcall4529

4 ай бұрын

@@minetest-dog-of-war-server Quote: _"To make a functional motor is a useful skill."_ If you only knew! One of my hobbies is programming micro controllers. When I discovered that I could change the behavior of a motor by writing instructions I knew I had wasted my college career! I learned to control steppers, brushed DC's and servos but I never mastered sensorless BLDC's. I only have a dual trace oscilloscope and the BLDC is a three phase motor. I want to build a triple half H-bridge to drive a sensorless BLDC motor. Building a 3 stator-coil sensorless brushless motor ...and... a driver circuit would be ideal.

@minetest-dog-of-war-server

4 ай бұрын

@@awaitingthetrumpetcall4529 that sounds amazing bro. By sensorless you mean Hall sensor? ... You can run Brushless without hall sensors but this is crude

@awaitingthetrumpetcall4529

4 ай бұрын

@@minetest-dog-of-war-server I don't want to use Hal sensors. My focus is on high speed brushless motors. I experimented with comparing three op amps to the neutral point in an attempt to detect each point in a six step commutation sequence but I failed in every case. I really like this stuff. I'm not gonna give up. EDIT: I used transistors in my experiments. I want to build a circuit using N channel mosfets in a bootstrap circuit.

what is the structure made of?

how is wired the coil?

In the description: The link to the bldc controller isn't working. Could you fix the link?

Why do you only have 6 magnets on a 9 pole motor?

Hi thats cool

What is the plastic like material used here to wind the copper wire?

@hahahaha.......9216

Жыл бұрын

Its pvc

@SaravanaKumarJANU

Жыл бұрын

It is PLA

@ryanmckenna2047

Ай бұрын

@@hahahaha.......9216I thought you had to use a conductive material, like laminated electrical steel or smc, wouldn't plastic just overheat and melt?

@ryanmckenna2047

Ай бұрын

@@SaravanaKumarJANU @hahahaha.......9216 I thought you had to use a conductive material, like laminated electrical steel or smc, wouldn't plastic just overheat and melt?

Quantos Volts é aplicado sobre o motor amigo? para fazer esses testes? Desde já lhe agradeço muito e meus parabéns pela sua inteligência 👏👏👏👏👏👏❤️

@somerandomguy7895

Жыл бұрын

25 volts

How did you find the number of windings?

@somerandomguy7895

Жыл бұрын

I have no idea

And you could add a outer cage for an out-runner in runner configuration to increase the magnetic field and play with the number of turns for rpm

Hi. Would appreciate verbal instructions also Thanks

nice

email wire coil scheme ??

What is the name of the device that connects the electricity of the electric motor?

@remasteredtoperfectvibes

Жыл бұрын

a bldc controller

top.

BRO WHAT ABOUT INPUT BRO

Is it used to be a cycle motor...

Que tenga rotor de 1kilo o 2kilo o 10kilo metronewton por segundo para un coche electrico seria gabuloso

where did you buy that speed controller?

@zebra-_-290

Жыл бұрын

Your welcome

its confused how to connect coil connection

100 % people watch but 2% people's try to make 😂😂😂😂❤️❤️❤️

6 coils and 4 magnets only ? 9 coils and 6 magnets only ? Why are these magnet not polarizes towards coils ?

Mujhe bhi bana na hai bhai saman kaha milega batao Bhai

كل شكر واحترام

Which material is used for making the structure

@ryanmckenna2047

Ай бұрын

I also want to know this!

@lawaniphilip8689

Күн бұрын

Pvc pipe

what is thr formule of turns why 100 ı want to learn?

What's the point of carving out a disc shape for the outside of the motor when the magnets are in the middle 🤔 surely it would be easier for winding the coils if those bit of plastic weren't in the way

Anh chế tạo động cơ giỏi quá cho em hỏi bộ điều tốc đó mua ở đâu ạ

надо было для чистоты эксперимента ток потребления показать

@aleks-mar

Ай бұрын

Дело даже не в токе потребления а в крутящем моменте. Он около нулевой. Магнитопровода нет вообще....

@MrStrocko

9 күн бұрын

@@aleks-marно пропеллер то свистит

@aleks-mar

8 күн бұрын

@@MrStrocko а кто сказал, что свист от этого пропеллера, там рядом настоящий мотор свистел, а в кадре было это недоразумение. Хватит быть такими наивными. Если бы так можно было бы, то так и делали бы все заводы. Изучайте физику, чтоб не вестись на подобную лапшу.

@MrStrocko

8 күн бұрын

@@aleks-mar Что это вы так возбудились , а ТОЭ и Эл.Машины я изучал тогда когда ваш папа гадил малышом дальше чем видел !

@aleks-mar

8 күн бұрын

@@MrStrocko я рад за Вас! Изучали, да видать так и не изучили толком ничего, если в такие ролики верите.

How do you determin the dimensions of all the parts?

@marcovalentinoalvarado3290

5 ай бұрын

Takes a lot of maths, Integrals and Inductivity calculus!

@rihemtaibi1933

5 ай бұрын

Which sizing method do you recommend? since I'm studying aeronautical engineering and my team is assigned to make BLDC

Do you have the links to the models to cnc machine? Thank you in advance.

@somerandomguy7895

Жыл бұрын

He probably does not xd

On How much voltage you operating this motor

@somerandomguy7895

Жыл бұрын

25 volts

muito bommmmmmmmmmmmmmmmmmm.

Gira mas lento perontiene mas torque

Sir how you calculate number of Turns and number of Gauge please 🥺 guide me, I'm ready for the pay for this information

Better and super 🙏🏻🙏🏻 Plz give contact Details🙏🏻🙏🏻 I salute your creations. How you cut the armeture pieces ??

@somerandomguy7895

Жыл бұрын

With powerful cutters

Wiring connection kayse kiye ho bro 1, 2 , 3 , no ke hisaab se ? Startin aur ending wire ka kayse connection bro ? Video mein thheek se pata nahin chal paya.

Can u tell the dimensions of parts used in making stator ?

RPM ?

#Desi_kalakaar

How can I buy this? Do you have to sell?

Voltage for 9 pole

sir I wanted to make a e bike. please make a habby motor that can run e bike

Esto rstaria bueno para un coche electrico el rotor iria.con imanes potentes y trabajarlo a 60 120volt cc Arg

What battery that you used?

@somerandomguy7895

Жыл бұрын

HE PROBABLY USED A POWER SUPPLY

Hm, he's using three wires for three phases but, if it's DC it needs to be six wires to change the polarity in the coil. If it's AC, or even if you rely on the field collapse to act as the reversed polarity, there needs to be a return/ground wire.

What is speed of 9

Bro diagram q nai dete ho

Winding diagram plz

High torque or high speed ???

@bitsurfer0101

Жыл бұрын

It looks like a wye configuration.

It's the same as a stepper motor.

Super super super your a engen's

PLEASE REPLY my doubt : if we rotate the shaft of this project by connecting it to a other motor , will voltage is induced in the stator winding .

@robinhooper7702

2 ай бұрын

Yes, but use a stream or a wind propeller for your input power.

👍🇺🇸

1 - single 2 - double 3 - triple

why you never show the power supply. ?

👍👋

I think You are confusing the use of the terms pole and slot.

cuales son los materiales

Missing measurement power consumption

Oh the wire has the isolation coating. The end of the wire strip off the coating and tight with the standard knot. I cannot understand the sequence and which side of the end tighten with the other one... I am stupid and lack of observation ability... and the patient!😅😅😑😑

❤❤❤❤❤❤❤❤❤❤❤😊

6 coil wire picture send help

Please how to build a motor with less rpm and more torque?

@mmcda2player97

2 жыл бұрын

Buy a motor and use gears to make it RPM less and the torque will automatically increased

@moanggaf7407

2 жыл бұрын

Coil turn >>>>

@toygartumer7385

2 жыл бұрын

increase the number of poles or just drive the motor with lower frequency and increase the power

Where I could But to make Bldc motor making pls tell.

NASA is gonna use it to go to Mars