A little documentary about me building my spare wheel mount from scratch. Make sure to follow me and my van at camper_vanelise Thank you for watching!
Жүктеу.....
Пікірлер: 44
@thedonmarko54853 жыл бұрын
One of the rare times where someone has shown the viewer how to do a proper job fair play and a great result.
@SallySparks4 жыл бұрын
You win for video editing and clarity of presentation in addition to awesome work!
@charliepawlett13 жыл бұрын
this was so pleasing to watch. Great videography editing and content.
@francenomadvwt43 жыл бұрын
No reinforcement at the back of the door? is the sheet metal of the van sufficient? in any case very good work ,congrats 👍
@thecorbettchronicles2 ай бұрын
Very cool!!! Thanks for sharing 👌🏽
@JoelSpuds10 ай бұрын
That was mesmerising - ASMR for fans of vans and welding, thanks!
@Azazel5182 жыл бұрын
Great Video..clear concise instructions. Thank you !
@1980jamesm3 жыл бұрын
Great Job!
@jeremyharris8834 жыл бұрын
WOW you do it right!
@DRAUSSENMENSCH5 жыл бұрын
Super Job! Knaller Schlappen, tolle Werkstatt, grossartiges Projekt! Sieht mega aus und steht dem Van! 🤙🏼👍🏼👍🏼
@DRAUSSENMENSCH
5 жыл бұрын
Ach, logo haben wir Dir nen Abo da gelassen!
@jtgworkshop9891
5 жыл бұрын
Yay! dankesehr :D
@timothy7901104 жыл бұрын
Fantastiskt!
@markparker65844 жыл бұрын
You made this look so easy. I guess the way you have built it takes away the need to reinforce the panel to stop it buckling with the weight? Great Job! looks fantastic
@jtgworkshop9891
4 жыл бұрын
Hey, thank you! There was a little rattling noise driving offroad, but the German TÜV requires a second safety anyway, so I strapped it to the airline rail with a ratchet strap as well. With that there is no more rattling
@user-no7hy2ds9y3 жыл бұрын
Great work 👏🏼 I wish I could do it on my t5, I have windows 🤷🏻♂️
@TheMadRolF2 жыл бұрын
Niceee one.
@vicbauwens Жыл бұрын
Considering a similar solution on a vertical door. Can you please share how the panels are holding up after a few years. Is the load of the wheel on the door causing any trouble? is the sheetmetal deforming from the dynamic loading (closing doors and vibrations from driving...) thank you!
@QuiqueBaloo5 жыл бұрын
what a great job I would like to know how thick you have used for the metal sheet 3mm is a good measure? I want to do something similar for a Mercedes Sprinter
@jtgworkshop9891
5 жыл бұрын
Hey, thank you! Yep, I went with 3mm stainless. Its fine, but I think you should go with 4mm, guessing that your tire is a little bit taller and heavier than mine.
@Lilyestelleweterilt Жыл бұрын
Hi. Love this build 😊 Do you have the size thikness of the steel plate you started out with in centimeters? And maybe the distance for each bend of the plate. I would be very greatful to have this, as I’m buliding one for my self. Thanks in advance. Best Regards Alex from Norway 😊🇳🇴
@sinapsivideomappinglab54023 жыл бұрын
amazing work, the 3d printed cap were blasting! but what about a security lock ?
@jtgworkshop9891
3 жыл бұрын
therefore I drilled 5 holes in the round plate. You can put steelwire with a lock through the 2 remaining holes
@morahim5178 Жыл бұрын
Great job.Is it possible to Mount a spare wear tire on tailgate of my Tiguan 2008?
@bongosteveofficial33483 жыл бұрын
Hey great work love the printer 🙌! What size tyres are you using?
@stko41572 жыл бұрын
Have you installed a water tank in the place of the spare wheel, where can I find it, provide information, thank you
@HELVIS. Жыл бұрын
hi great video could you make one for my ford transit custom 2015 ?
@isabelatierra23513 жыл бұрын
thanks
@stko41572 жыл бұрын
good job, would you install the same for me as the cost and in which province you live, thank you
@Yahoomediaclub2 жыл бұрын
Do you make to order? Citroen Relay
@sunysideup1111 ай бұрын
sehr cooles Video......
@stephenwhite83063 жыл бұрын
This needs to be at 3m views at leased.
@stevebarker13023 жыл бұрын
Awesome, but why not mount it on the side with dents already there, would have hidden them?
@jtgworkshop9891
3 жыл бұрын
now there is a ladder mounted to the right door to get on the roof rack and hide the dents :D
@darrangriffiths99055 жыл бұрын
Are you going to produce and sell these at all?
@jtgworkshop9891
4 жыл бұрын
nope, im sorry :D
@richard70273 жыл бұрын
great workmanship i know its cheeky would you consider making one and selling it? I definitely buy from you.
@GHPREPPER
3 жыл бұрын
I to would buy one
@Skupik14 жыл бұрын
What’s the name of that system mounting list?
@jtgworkshop9891
3 жыл бұрын
hey, they are called airline rails
@Akimchhh3 жыл бұрын
Tell me please. I want to make the same option and come to Europe. Will the police have any questions about certification? Have you ever been asked such questions by the police? Thanks.
@jtgworkshop9891
3 жыл бұрын
Hello, the police never said anything about my "addons", German TÜV also. Because it is removable with tools it counts as "cargo" or load.
@user-fz9mn7xz6t
3 жыл бұрын
Friend it is very cool. I will do the same. in Russia, no one has done this, I will be the first to use your technology. question: are the bolts that are inserted into the long rail purchased or homemade? (7:45 on video)
@jtgworkshop9891
3 жыл бұрын
@@user-fz9mn7xz6t Hey, they are puchased and called "airline screw fittings". Its a pretty cool system for adjustable mounting solutions
Пікірлер: 44
One of the rare times where someone has shown the viewer how to do a proper job fair play and a great result.
You win for video editing and clarity of presentation in addition to awesome work!
this was so pleasing to watch. Great videography editing and content.
No reinforcement at the back of the door? is the sheet metal of the van sufficient? in any case very good work ,congrats 👍
Very cool!!! Thanks for sharing 👌🏽
That was mesmerising - ASMR for fans of vans and welding, thanks!
Great Video..clear concise instructions. Thank you !
Great Job!
WOW you do it right!
Super Job! Knaller Schlappen, tolle Werkstatt, grossartiges Projekt! Sieht mega aus und steht dem Van! 🤙🏼👍🏼👍🏼
@DRAUSSENMENSCH
5 жыл бұрын
Ach, logo haben wir Dir nen Abo da gelassen!
@jtgworkshop9891
5 жыл бұрын
Yay! dankesehr :D
Fantastiskt!
You made this look so easy. I guess the way you have built it takes away the need to reinforce the panel to stop it buckling with the weight? Great Job! looks fantastic
@jtgworkshop9891
4 жыл бұрын
Hey, thank you! There was a little rattling noise driving offroad, but the German TÜV requires a second safety anyway, so I strapped it to the airline rail with a ratchet strap as well. With that there is no more rattling
Great work 👏🏼 I wish I could do it on my t5, I have windows 🤷🏻♂️
Niceee one.
Considering a similar solution on a vertical door. Can you please share how the panels are holding up after a few years. Is the load of the wheel on the door causing any trouble? is the sheetmetal deforming from the dynamic loading (closing doors and vibrations from driving...) thank you!
what a great job I would like to know how thick you have used for the metal sheet 3mm is a good measure? I want to do something similar for a Mercedes Sprinter
@jtgworkshop9891
5 жыл бұрын
Hey, thank you! Yep, I went with 3mm stainless. Its fine, but I think you should go with 4mm, guessing that your tire is a little bit taller and heavier than mine.
Hi. Love this build 😊 Do you have the size thikness of the steel plate you started out with in centimeters? And maybe the distance for each bend of the plate. I would be very greatful to have this, as I’m buliding one for my self. Thanks in advance. Best Regards Alex from Norway 😊🇳🇴
amazing work, the 3d printed cap were blasting! but what about a security lock ?
@jtgworkshop9891
3 жыл бұрын
therefore I drilled 5 holes in the round plate. You can put steelwire with a lock through the 2 remaining holes
Great job.Is it possible to Mount a spare wear tire on tailgate of my Tiguan 2008?
Hey great work love the printer 🙌! What size tyres are you using?
Have you installed a water tank in the place of the spare wheel, where can I find it, provide information, thank you
hi great video could you make one for my ford transit custom 2015 ?
thanks
good job, would you install the same for me as the cost and in which province you live, thank you
Do you make to order? Citroen Relay
sehr cooles Video......
This needs to be at 3m views at leased.
Awesome, but why not mount it on the side with dents already there, would have hidden them?
@jtgworkshop9891
3 жыл бұрын
now there is a ladder mounted to the right door to get on the roof rack and hide the dents :D
Are you going to produce and sell these at all?
@jtgworkshop9891
4 жыл бұрын
nope, im sorry :D
great workmanship i know its cheeky would you consider making one and selling it? I definitely buy from you.
@GHPREPPER
3 жыл бұрын
I to would buy one
What’s the name of that system mounting list?
@jtgworkshop9891
3 жыл бұрын
hey, they are called airline rails
Tell me please. I want to make the same option and come to Europe. Will the police have any questions about certification? Have you ever been asked such questions by the police? Thanks.
@jtgworkshop9891
3 жыл бұрын
Hello, the police never said anything about my "addons", German TÜV also. Because it is removable with tools it counts as "cargo" or load.
@user-fz9mn7xz6t
3 жыл бұрын
Friend it is very cool. I will do the same. in Russia, no one has done this, I will be the first to use your technology. question: are the bolts that are inserted into the long rail purchased or homemade? (7:45 on video)
@jtgworkshop9891
3 жыл бұрын
@@user-fz9mn7xz6t Hey, they are puchased and called "airline screw fittings". Its a pretty cool system for adjustable mounting solutions