Making A Super Cheap Bracket For The Spare Wheel For Pennies.
This is a quick video of me putting the spare wheel on the back doors to create much needed space in the van. I don't have the funds ( even if I did I would still do it this way ) to buy a proper bracket so I do what I do best and make something myself for as cheap as possible. Because the holder for the spare wheel under the van is missing, the wheel was kept in the van under the bed meaning I lost out on all that space. Costing me £4.50 for nuts and bolts it is now attached to the back door. Please don't forget to like and subscribe if you like what you see 😉 .....................................................................................................................
Thank you very much for your support, I appreciate all you support. Don't forget to subscribe, like, share and comment below.
Check my Other videos
How NOT to install a diesel heater
• How NOT to install a d...
Visit to Beamish museum in the cold part 1
• Visit to Beamish museu...
Finding secret picnic spots after finally fixing the
• Finding secret picnic ...
Starter motor grounding issues. Is vanlife on hold?
• Starter motor groundin...
Stranded again. is this the end of
• Video
#vanlife #vanlifeeurope #explore#vanlife #vanlifediaries #vanlifers #vanlifemovement #vanlifeexplorers #vanlifeeurope #vanlifestyle #vanlifeideas #vanlifegermany #vanlifeproject #vanlifer #vanlifedreams #vanlifecommunity #vanlifedistrict #vanlifeaustralia #vanlifeuk #vanlifecamper #vanlifeculture #vanlifesociety #vanlifevirals #vanlifedogs#vanlife #vanlifers #vanconversion #buslife #vanlifemovement #vwcamper #motorhome #projectvanlife #camperlifestyle #vanlifeexplorers #vanlifeeurope #vanlifestyle #wohnmobil #vanlifeideas #vanliving #vanbuild #vanlifegermany #vanlifeproject #vanlifer #vanlifedreams #campervanconversion#vanlife
Пікірлер: 14
This ❤
Well done luv,very ingenious x
Beltin mik beltin ..
Good job, that will look good with a cover on. Well done 👍
@Road.to.recovery
Жыл бұрын
Thankyou next thing I plan to do is get a cover
Mick if can find it swap out the wood for some angle iron instead of wood it will stop it from bending the door bad 👍🏻
@Road.to.recovery
Жыл бұрын
It has got a metal plate on as well as the wooden plate too
@davidmuirhead1060
6 ай бұрын
Extend the iron and/or wood to catch the edges of the inner panel of the window frame to help stop the wheel flexing the panel. As it is, you are relying on a single thin sheet of metal to stop the wheel flexing the door panel ( plus a thin piece of plywood against the van window edge ). All the extra layers of steel and plywood are still just over laid on a single thickness of steel panel. Fitting the wheel so the rubber of the tyre sidewall pinches onto the top fold of the swage in the outer door panel will also help spread the weight of the wheel, reducing excess flexing. A good, simple, space saving idea though.
Awesome hack, pls update after some driving how it holds up!
@Road.to.recovery
Жыл бұрын
I will do. I've had many comments on Facebook saying it cracks the hinges etc so I'll keep an eye out amd see how it holds up
@davidmuirhead1060
6 ай бұрын
@@Road.to.recovery The hinges should be ok. It is ladder racks and climbing pegs that drastically overload the door hinges. If you are just using it for mounting the wheel it should work fine.
D you get much interest from being on the radio 😊
@Road.to.recovery
Жыл бұрын
Few messages. Even if I can help 1 person I've made a difference and that's all I want is to help
Has your door fell off yet lol. Thanks for the video by the way. Have you had any problems at all ?