Making A PCP Air rifle firing valve (EPIC 2)
Ғылым және технология
Hi guys in this one we make a new firing valve for the EPIC 2, this valve will be better suited to sub 12 rifles and should be more efficient.
@lordchristopherpatterson on instagram
hardairmagazine.com/ham-colum...
Sekhmet gauges: 10% off
Code: "SUB12"
www.sekhmetonline.com/?ref=SUB12
Merchandise link:
personalised.clothing/sub12ai...
Пікірлер: 59
Thank you very much for that shout out , much appreciated ❤
@Tim_Bassett
Ай бұрын
I don't have an instawotsit account, however good luck in the comp - I'm sure all the practice will pay off 🙂
@sub12airgunners
29 күн бұрын
your welcome mate
Very clever work. Thanks for teaching us all.
@sub12airgunners
29 күн бұрын
My pleasure thank you for watching
Nicely machined item, will be interesting to see if there are any more performance improvements for this rifle. Will check out the article when I get a bit more time, thanks for the link.
@sub12airgunners
29 күн бұрын
thanks 😀👍
Brilliant I learn something of the internal workings every time. Love your work.
@sub12airgunners
29 күн бұрын
Many thanks!
Ahhhhh it has returned 😁 looking forward to this one chaps.
@sub12airgunners
29 күн бұрын
thanks for watching mate 😀
Great video on making a better valve for sub12 use and as always, quality machine work. The original TP was huge! Thanks for sharing the video …
@sub12airgunners
29 күн бұрын
yes this gun would make some power in FAC for sure, thanks Lee
once again,great video well explained as expected👌🏼
@sub12airgunners
14 күн бұрын
Thanks again!
Nice to see the EPIC back - I do like the idea of that valve - the results will be interesting on the closing speeds and the effect on efficiency. 1.7 bar a shot still seems a little high, but a real jump forward from factory :-) Keep up the good work, and thanks for the videos.
@sub12airgunners
29 күн бұрын
thanks Tim we hope to get a few more shots out of it yet 😀
👍👌 Excellent stuff!
@sub12airgunners
29 күн бұрын
thanks for watching 😀
Nice work, I enjoy every minute of your videos 👍🏻👌🏼
@sub12airgunners
27 күн бұрын
AwesomeThank you😀
Very good video. Very clever.
@sub12airgunners
29 күн бұрын
Glad you think so👍
Nice bit of engineering as always, but the best part is yet to come as when you increase the diameter of the vent to the rear of the valve potentially you loose a little surface area for the air to push against, it will be something of interest to a lot of airgun tinkerer's out there.
@sub12airgunners
29 күн бұрын
nice one, not to many people think about things like that we started small so we can work up but it will be interesting 😁
Good , very precicision.Thks😊
@sub12airgunners
29 күн бұрын
thanks for watching 😀
The Abom of airguns - impressive, as always, chaps!!
@sub12airgunners
29 күн бұрын
thanks for watching 😀
Another good video sir, best of luck to ya Christopher 👍
@sub12airgunners
29 күн бұрын
Thanks Christopher 👍
Sweet!
@sub12airgunners
29 күн бұрын
thanks for watching 😁
definitely interesting . i guess most of there gear is aimed at the higher power market so its easier for manufacturing and price to make one valve fits all so to speak . great job mate . and what a cool name spindexer that’s for sure . almost as good as sharp pointy thing but not quite 🤣🤣
@sub12airgunners
29 күн бұрын
🤣🤣 yes sounds like something a 70's disco 😂 yes this gun was built for power for sure
Awesome dude 🤟
@sub12airgunners
29 күн бұрын
Thanks ✌️
Exceptional
@sub12airgunners
29 күн бұрын
thank you
Nice 👌🏻👌🏻👌🏻👌🏻👍🏻
@sub12airgunners
29 күн бұрын
thank you 👍
First class work as always Jeff, thanks as always for sharing with us Cheers 👌👌👌👌👌👍👍👍👍👍👍👍👍👍
@sub12airgunners
29 күн бұрын
Glad you enjoyed it
nice one
@sub12airgunners
Күн бұрын
thank you for watching 😀
Do yo have blueprint?
👍👍👍
@sub12airgunners
29 күн бұрын
thanks for watching 😀
😊😊
Okay so SUB12 valve,,,, i had a feeling it was something like this you talked about. But i am FAC, so i just watch video none the less, and throw my thumb in the air. BTW are these regulators meant to be so hard to turn, mine is damn hard to turn VS a FX, but the regulator work just fine no issues there, but adjusting / turning it OMG someone need to make a more sizeable adjusting key / tool 700 mm long 4.5 mm CZUB barrel performing well 🙂
@sub12airgunners
29 күн бұрын
thanks for watching 😀 yes the reg will be stiff to turn especially when you have high pressures 👍
🙃
Bit of Edgun in there
@sub12airgunners
29 күн бұрын
the reg looks very similar 😁
@TheAsa1972
28 күн бұрын
@@sub12airgunners You need to talk to this man Симуран He does answer emails ,Mods for the Leshiy
Sir I would like to speak to you over a telephone is this possible?
Great content Have you thought of doing youtube shorts
@sub12airgunners
29 күн бұрын
yes we are going to try to do some 😀 thanks for watching 😀