Пікірлер

• 
  @ianprice0006 сағат бұрын

  Great video. Not sure if it is a design fault but one thing I am hearing is the DRS can lose power over time. Having had a look at a friends, there doesnt seem to be any locking screw on the hammer spring adjuster. Over time as he was shooting it the vibration caused the HS adjuster to move and, because it is under pressure from the spring, it was slowly unwinding itself. Maybe he just got unlucky with his ????

• 
  @linggahunting237111 сағат бұрын

  Wooow😍

• 
  @aleksandarruzic330117 сағат бұрын

  what is the ideal pressure in the first and second regulator for a Maverick 30. thanks

• 
  @krisgater6891Күн бұрын

  Another great video and one I've been watching out for so thank you..I'm interested to see the improvements you can make to it, as I'm thinking of going for one..The trigger needs sorting can't understand why FX hasn't resolved the sticky trigger. Anyway thank you for the video and looking forward to the next one about the DRS..

• 
  @sub12airgunners21 сағат бұрын

  Thank you very much!

• 
  @krisgater689118 сағат бұрын

  @@sub12airgunners Can I ask you a question please..I'm a huge fan of yours and I really enjoy your work..relating to the DRS rifle..Do you think the rifle could be improved if it was worked on by one of the Tuning companies and would it be worth doing? Your opinion would be welcomed. Thanks

• 
  @SHShahabКүн бұрын

  Excellent video as ever ! Just 1 question : where is the breath hole of the main block on this gun? actually I mean where the breath hole on the reg casing ends to ?

• 
  @andycarp1288Күн бұрын

  Hi nice video as always but seriously the way that performed is terrible I’ve got an FX Typhoon which shoot’s better than that so I’m shocked that FX have turned out a gun that performs so badly & having seen lots of your videos I know it’s not your shooting that made this gun look bad ,look forward to see if the upgrades make any improvements.

• 
  @sub12airgunnersКүн бұрын

  yes it's a shame but we will make it better 😀 thank you for watching 😀

• 
  @mrmactknifeКүн бұрын

  Shocking accuracy for a rifle that costs 700 quid! Looking forward to seeing you work your magic on it. CZ barrel, and an in-house produced suppressor/shroud perhaps? :)

• 
  @sub12airgunnersКүн бұрын

  😁 thank you for watching 😀

• 
  @thomaswebb3043Күн бұрын

  Looking forward to want you two do this one :) I have tried a club members DRS and really can't say i like the stock it's to short for me :( Was great speaking with you both at the Daystate/BRK Days.

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀 it was nice meeting you too

• 
  @robinbaines1474Күн бұрын

  He knows what he,s doing brillant👍

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀

• 
  @MyAirgunPhaseКүн бұрын

  Ooh, I'm excited about about the "shorty" version, that should look fantastic, please do!

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀 we are going to try 😀

• 
  @user-bp7li5yj4kКүн бұрын

  Nice review of a shotgun 🤨

• 
  @sub12airgunnersКүн бұрын

  🤣

• 
  @Marcus2233Күн бұрын

  Jesus them groups aint great, i used mine at 40 yards with a 3x9 scope which i could barely see the target using jsb heavys and got better groups 🤔 switched to a longer scope now so will try a proper group next outing, i went for the grade 1 walnut, fantastic looking rifle, looking forward to see what work you do to it and maybe try the heavys again, my t12 and drs both like em, seems to be a fx thing, got a link or name for the gauge cover ?, hate the chrome

• 
  @sub12airgunnersКүн бұрын

  we are still bedding it all in so i hope they get a little better

• 
  @POINTSOFAIMcheekyscouserКүн бұрын

  Are we all able to buy the jsb shorts

• 
  @AirgunfunrichКүн бұрын

  Good honest review as always. Look forward to any future videos on this 👍

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀

• 
  @mymodel6Күн бұрын

  The ozzy/saaaf lundun accent mix is one of the weirdest i've certainly ever heard...

• 
  @jeffhello1444Күн бұрын

  nice one

• 
  @sub12airgunnersКүн бұрын

  Thanks

• 
  @jeffhello1444Күн бұрын

  nice one

• 
  @sub12airgunnersКүн бұрын

  Thanks

• 
  @jeffhello1444Күн бұрын

  nice one

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀

• 
  @jeffhello1444Күн бұрын

  nice one

• 
  @sub12airgunnersКүн бұрын

  😀

• 
  @jeffhello1444Күн бұрын

  nice one 😀😀

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀

• 
  @moominjuice2Күн бұрын

  Excellent vid. Just about to upgrade to a Huma as my stock reg is leaking so really appreciate this teardown. At 26:00 you are dry firing to test but the safety appears to be on - any notes on assembly to ensure it's engaged properly?

• 
  @gordy19612 күн бұрын

  The absolute best tutorial on the web.... well done old chap..

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 😀

• 
  @nicksamsunggalaxys24042 күн бұрын

  already seen the accuracy was not good on this rifle on a couple other channels to be honest I would never buy an fx...Agt, epic, krait all day long

• 
  @sub12airgunners2 күн бұрын

  yes agt, airmaks are very good

• 
  @nicksamsunggalaxys2404Күн бұрын

  @@sub12airgunners i saw another vid saying how tight the stock is put on to the action can help with harmonics aiding accuracy hope it helps

• 
  @chrisfigueroa33612 күн бұрын

  Awesome video thanks for your honest review on the air gun thanks for sharing be safe buddy 💯

• 
  @sub12airgunners2 күн бұрын

  thank you for watching 🙏

• 
  @kempy95842 күн бұрын

  Accuracy wow if that were mine it would be going back🤣 but on the up can’t wait for upgrades 😁

• 
  @sub12airgunners2 күн бұрын

  yes it's not great but it will be in the end😁

• 
  @rayingles12 күн бұрын

  Honest review thankyou

• 
  @sub12airgunners2 күн бұрын

  thank you for watching 🙏

• 
  @PaulSmith-jr1qe2 күн бұрын

  Cracking video as always and you tell it as it is unlike the FX fanboy promoters who claim everything FX is the most accurate thing on the planet, don't get me wrong I think FX come up with some of the most innovative mix of design features around. I have an Impact M3 and it shoots like a laser beam but it took a lot of work and money to make it do that a lot of which was following your advice with a new HFT 500 barrel and an Airmarksman Backbone to make it rigid. I don't know anyone who has had success with the drinking straw liner barrel on any sub 12 rifle, most people I know are very dissapointed at the accuracy for what is normally an expensive bit of kit.

• 
  @sub12airgunnersКүн бұрын

  i would agree with you, i love my m3 but you need to make it work properly to get the best out of it

• 
  @Piupiu68az2 күн бұрын

  🏆 I'm sorry

• 
  @sub12airgunners2 күн бұрын

  thank you for watching 🙏

• 
  @memememe26742 күн бұрын

  Are you still going to do a vid on the ATF Vixen? Or has it lost interest now it's been out a good while?

• 
  @sub12airgunners2 күн бұрын

  no still going to do one 😁

• 
  @garymurphy5133Күн бұрын

  @@sub12airgunners Brill,been waiting for that too. i really need to see your strip video for the vixen.

• 
  @zebedee42 күн бұрын

  Thanks for the review. Interesting. Got to admit if that was mine I'd be a little disappointed with those results. As already said £750 ish isn't the end of of it when you add on the pic rail etc. Probably better to save up another £2 ,£300 quid and buy something better or buy secondhand and buy something far superior.

• 
  @sub12airgunnersКүн бұрын

  yes it's not as good as we were expecting but it is what it is, had i have got the all singing one i would not be happy

• 
  @danielcooper1752 күн бұрын

  Air arms diablo field pellet wise perform the best, but these really like slugs. I have never liked FX after buying the mk1 crown that was terrible but these group well and accurate but quite pellet fussy

• 
  @sub12airgunnersКүн бұрын

  we did try aa diablo and express but the jsb seemed better

• 
  @Tim_Bassett2 күн бұрын

  Lovely looking rifle, although I think you are being too kind around the accuracy :-) I also think its a 1k rifle when you factor in the pic rail, which is almost a must have........however, a nice fair review on a rifle which has so much promise.....looking forward to the series.

• 
  @sub12airgunnersКүн бұрын

  i know what you mean but this one is at the bottom end of the scale, had we have got the all singing all dancing one i would not be happy

• 
  @skalliwag27662 күн бұрын

  Great review as always, one thing good about most fx rifles is the synthetic stock make them very light, which would be great to carry around when hunting, it was nice to meet you both at the daystate experience days 😊

• 
  @sub12airgunnersКүн бұрын

  yes it is very light and easy to shoot 😀 it was good to meet you too👍

• 
  @nicholasrichards24022 күн бұрын

  Cheap and nasty fx rubbish.

• 
  @xWILZTAx2 күн бұрын

  These peaked my interest but after that accutacy testing im staying well clear from this like all other fx models. They are truely awful groupings.

• 
  @sub12airgunnersКүн бұрын

  thanks for watching 🙏

• 
  @shaunjones60492 күн бұрын

  Fx consistency. Consistently bad , On all models out of the box shocking ☹️ £700 for tin can gun😳

• 
  @sub12airgunnersКүн бұрын

  the consistency is good on this one 😀

• 
  @shaunjones6049Күн бұрын

  Accuracy at 30yrds is just not good enough, if a rifle can’t shoot straight. 🤔 what’s the point of owning it? ? I can’t see many people buying this product to shoot tin cans. Are Fx marketing this rifle as a fun gun / toy? Hopefully they aren’t marketing it as a hunting rifle. Punching paper is one thing, watching a rabbit with a smashed jaw trying to feed is another. Consistency? 🙄. Accuracy , Accuracy, Accuracy, =consistency.

• 
  @thehaze19722 күн бұрын

  Liked the design so I bought an Artemis M30 a couple of years ago, might try and make a new barrel for it because it shoots worse than this gun but not to bad for the money. Thanks for sharing another interesting review. Big thumbs up. 👍

• 
  @Marcus1954s2 күн бұрын

  I would check the brass thimble at the breech, the leade, rifling and crown first. Even with Chinese barrels I find that most faults are easily fixed with deburring/polishing.

• 
  @thehaze19722 күн бұрын

  @@Marcus1954s Yeah, all my Artemis airguns shoots quite well apart from the P18 which is really bad and the M30 does also need some help. 😁

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 🙏

• 
  @ahmadfakhrie93512 күн бұрын

  Nice ❤❤👍👍👍

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 🙏

• 
  @user-rs3ky4em9n2 күн бұрын

  How much nob

• 
  @The.Toaster2 күн бұрын

  Lots of nob

• 
  @sub12airgunnersКүн бұрын

  😂

• 
  @user-rs3ky4em9n2 күн бұрын

  Crap groping for fx

• 
  @myadventureman26362 күн бұрын

  FX nice...❤ it

• 
  @sub12airgunnersКүн бұрын

  thank you for watching 🙏

• 
  @2speed8182 күн бұрын

  Can't wait for the upgrades on this one

• 
  @sub12airgunnersКүн бұрын

  yes this should be a good one if we can get some bits 😀 thank you for watching 🙏

• 
  @secondfirstsecond2 күн бұрын

  And still using the famous FX "the garbage" trigger.

• 
  @sub12airgunnersКүн бұрын

  🤣 thank you for watching 🙏

• 
  @jp83512 күн бұрын

  nice review👍, always good to see a review outside of the usual FX youtube crowd 😋. I did see in other videos that the drs does not like every pellet, maybe some ammo change would add to that grouping. some questions if you don't mind. did you experience any low shots after resting the rifle? also does the maverick magazine fit with the picatinny mounted?

• 
  @sub12airgunnersКүн бұрын

  no low first shot on this one and the maverick / crown mag will not fit with the low pic rail fitted 😀 thank you for watching 🙏

• 
  @wsmc82752 күн бұрын

  Trigger assembly looks slightly different then the Panthera.

• 
  @doomfathertm87712 күн бұрын

  Wait what, that accuracy is TERIBLE!! I know it's not the shooter, he is very capable, the accuracy from that gun is terrible, I'm shocked.

• 
  @OriginalMarkyBoy2 күн бұрын

  It’s an FX 👍🏽

• 
  @sub12airgunnersКүн бұрын

  🤣🤣

• 
  @sub12airgunnersКүн бұрын

  yes it's not great but we are still bedding it all in so may get a little better

• 
  @Esoxlucius51Күн бұрын

  Mine is like a laser! Just 'cos his isn't accurate ( yet) doesn't make all of them so.and I don't use JSB pellets - too many fliers, so I use H& N ftts or Daystate kaisers( same thing).btw, this is the first FX I've ever owned - I have Daystate, Airarms and weirauch pcps - and what I call the best springer I've ever had,a hw98.

• 
  @doomfathertm8771Күн бұрын

  @@Esoxlucius51 maybe he didn't use the best pellets for that rifle then.

• 
  @Marcus1954s2 күн бұрын

  Looking forward to a conversion. I was going to buy one but instantly disliked how the breech was disproportionately thinner than the cylinder over the barrel, ruining the lines/overall look for me. Didn't know whether the internals could be reproduced, on my small lathe, to fit a slimmer cylinder and new rifled barrel. It is screaming for a nice wooden stock, and certainly an Air Arms style stock would be super. Shame about dovetails being so short. I imagine 2 or 3 spacers along barrel would help nullify harmonics/POI change.

• 
  @BadlydrawnBen2 күн бұрын

  I was wanting one of these but after watching this video it just doesn't perform as well as my MK1 FX verminator 😢

• 
  @sub12airgunnersКүн бұрын

  it's not great but may get a little better with a bit more use

• 
  @BadlydrawnBenКүн бұрын

  @@sub12airgunners to be honest I'm really surprised by the grouping my little verminator groups at 50 yards like this one groups at 50 I honestly expected it to be a tack driver 😕

• 
  @andrewworley89462 күн бұрын

  Budget? 😂😂😂

• 
  @sub12airgunnersКүн бұрын

  from the big names this is very budget you can't get anything from AA, Bsa, Daystate, brk, Weihrauch

• 
  @recklessjunkie2 күн бұрын

  I'm dying to see the barrel liner and shroud matt showed a glimpse and it seems different more ridged because of having to separate liner from air cylinder and something about keeping it free floating they had to come up with something interesting maybe a follow-up on that nobody's shown that yet...

• 
  @sub12airgunnersКүн бұрын

  yes we will be showing it all soon 😀