LR3 Suspension Height sensor connector plug repair | Land Rover Discovery 3

Автокөліктер мен көлік құралдары

A while back I replaced a right rear height sensor on my Land Rover Discovery 3. In the process I broke the electrical connector to the height sensor
• LR3 height sensor repl...
Fortunately a spare connector plug/harness is available. YMQ503220 is the part number you want to look for if you need to replace yours. They are not difficult to repair, just make sure either your crimp or solder is done correctly and heat shrink the join with quality heat shrink.
If you enjoyed this video and would like to see more then please give me a thumbs up, leave a comment and consider subscribing so you don't miss a new upload. You don't have to do all three (or any if you don't want) but it really helps grow the channel
If you'd like to support the channel so I can keep making videos for you all then please consider a donation via the super thanks!

Пікірлер: 8

  • @rrock2008
    @rrock20085 ай бұрын

    When you changed out the height sensor did you have to recalibrate the height? I replaced the left front sensor and now there is a suspension fault and the display screens shows that wheel being all the way to the bottom but actually the height is about normal. Any suggestions?

  • @Shanes_Shed

    @Shanes_Shed

    5 ай бұрын

    yes i did recalibrate. A fault code read would tell you whats going on a bit more, but i would say the calibration is out of whack at that corner

  • @rrock2008
    @rrock20085 ай бұрын

    Is it possible one of the pins did not make proper contact?

  • @Shanes_Shed

    @Shanes_Shed

    5 ай бұрын

    do you have a decent scan tool like a Gap diagnostic IID?

  • @fredtyler1520
    @fredtyler15202 жыл бұрын

    please concider making a video on your thoughts on updating software to car with iid gap tool. I am stuck at how to execute flash update file.

  • @Shanes_Shed

    @Shanes_Shed

    2 жыл бұрын

    What is it that you actually need to update?

  • @fredtyler1520

    @fredtyler1520

    2 жыл бұрын

    @@Shanes_Shed gap tool shows a few things that have updated files. I read some say if it isn't broken don't mess with it. I'm thinking the had to be reason for the new file. The one I would try would be the instrument panel. Less so the engine stuff.

  • @Shanes_Shed

    @Shanes_Shed

    2 жыл бұрын

    Yeah I kinda agree with if it isnt broken don't mess with it. I believe gap will charge a fee for each update you use.

Келесі