This came at a good time! I have a 430 diesel that is having an issue with melting the fuse block. I am thinking its the wiring that needs to be cleaned up. These are great tractors! I have a 322 gas yanmar powered one too. These tractors have needed very little since new. I inherited both and they're approaching 900 hours on them. I hope to pass them on to my kids some day. Thank you for your work!

@WorkshopRebuild

Жыл бұрын

Hi Max, I just read that this was an issue with the Yanmar powered John Deere garden tractors. Since everything works now, I don't believe the fuse block is at risk, but I will double check. The only way this can possibly happen is if the connectors of each fuse are loose. Poor contact will cause a fuse holders to melt. It might be good to clean up the fuse connections and give the fuse block connectors a squeeze with some pliers. This way they will grab better. If I notice anything abnormal, I will update you on this situation! You have some very nice tractors and it would be wonderful to pass them down. I hope you can keep them up and running for many years to come. Regards Andreas

very nice video man. nice 332

@WorkshopRebuild

Жыл бұрын

Hi there, thanks for your comment! It looks like you have a nice 332 as well, with some very desirable attachments!! Hopefully it'll run for many more years. Regards Andreas

Nice tractor! Glad you got another good working Deere!

@WorkshopRebuild

Жыл бұрын

Hi Jason, thank you very much! It was running and operating from the start, but it was in need of fresh oil and filters. Currently I am working on the 46" deck and I should have that ready to cut grass in summer. Thanks for viewing!! Cheers

I have always wanted a 332 Deere. Never could find one near me to go buy. I've had a 330, 430 Sold both and wish I had kept the 330, Just something about that Deere I loved. I now use a 2001 455 Love it and will never part with it until Death anyway!

@WorkshopRebuild

9 ай бұрын

The 332's are really nice machines and I'm glad I found one in such nice condition. They are getting harder to find by the day (or at least in my area). You have very nice machines and I think you have an absolute beast of a machine, with your 455! I've only seen one in person so far and they are really neat!! If you keep up with the maintenance, you'll have a great machines for many more years. Maybe you'll even find a 332 down the road some day to add to your collection. Thanks for sharing this with me. Regards Andreas

Don’t let people give you grief about the Wix filters. Wix is owned by Mann+Hummel. They own and make brands such as Wix, Mann, Purolater,and Filtron to name a few. They also do private label for companies such as John Deere and Napa Gold. They can build to many different specs on the same filter. If you were to cut open a Wix, Deere or Napa Gold they would all be pretty much the same inside.

@WorkshopRebuild

10 ай бұрын

I appreciate your comment! Thanks for sharing this information with me, which I did not know. I have always opted for Wix filter for many vehicles and different types of equipment. Then work well and are readily available at my closest automotive store. Al they need is the number and they can cross-reference it to any Wix filter pretty much...which is super helpful! I noticed JD and Napa Gold filters are at least 20% more expensive, but that's actually not the reason why I don't buy them. If they are the pretty much the same, that's pretty much all that matters. Thanks again for your comment. Regards Andreas

I work at a John Deere dealership as a service tech and those are the same brand filters we use

@WorkshopRebuild

Жыл бұрын

Hi there, thanks for letting me know! I've received many comments about my choice of filters, but I'm glad you were able to back me up. I never noticed any issues with WIX filters and I will continue to use them for my projects. Thank you for your comment! Regards Andreas

@jdraupp

8 ай бұрын

Wix is a good aftermarket brand, but if I was taking my machine to a dealer and you weren’t using genuine JD filters and parts, I’d be a little upset. When I get parts from my dealer, no one hands me a WIX.

@humboldtsbest2265

8 ай бұрын

@@jdraupp it’s in the service kits, and they don’t always have them but I prefer them, they’re nicer than the John Deere filters

Take the mesh screen off the bottom and all the mats that are surrounding everything in the rear of the tractor. Throw it all in the trash. Every time you use your machine give it a quick blow out and it won't ever get like this

@WorkshopRebuild

9 ай бұрын

The mesh screen is definitely trap for debris, especially from a mower deck. I will keep it on, since I will not be using this tractor as a mowing machine. Maybe if it collects too much in a short period of time, I‘ll keep it off! Thank you for your suggestion, Alex. Have you run into other issues on you JD garden tractor that you leave away or have changed over the years? Regards Andreas

Hey WR! If you ever get a chance a could you also make a service video of the 400?

@WorkshopRebuild

10 ай бұрын

I will keep this in mind! At this moment the JD400 only saw ~10h since the rebuild. I‘m not sure it‘s in need of a service in a long time, but I can do an update in the near future😊

A lot easier to add oil in the valve cover.

@WorkshopRebuild

6 ай бұрын

Both are oil filler caps, so it doesn't really matter.

Thanks for the great video, always enjoy the information and learning shared. Are you still planning a video detail the laser rust remover? All the best from SW MB!

@WorkshopRebuild

Жыл бұрын

Hi there, thank you for your comment! I have a laser cleaning video planned with the Renault R5 parts. You can see the condition of the parts in this video: kzread.info/dash/bejne/haJ9sphpg83Qj9Y.html This will make a great video and hopefully I can share as much information as possible. If you have any questions you want me to answer, you can leave them down below or even send me an email. Regards Andreas

Good channel I have a 317 with the motor locked up my son is suppse to see it he can get it apart and see if we can over haul it and i have a 318 great machine

@WorkshopRebuild

Жыл бұрын

Hi there, thanks for tuning in and I'm happy to hear that you have a 317 that needs some work. I did a full series on a 317 a while back and this is the link to the playlist: kzread.info/head/PLJYgf55IHeu9FxtkEcHdCS0C0I7vtCa6_ In the second video, I discuss the differences between the Kohler KT17 Series 1 and Series 2. This will help you for your rebuild project. The 318 is a much more refined tractor compared to the 317. If you have them both running, you can get A LOT of work done with them. Regards Andreas

That tractor is a little beast! Do you have any attachments for it?

@WorkshopRebuild

Жыл бұрын

Hey Matthew, I have a 46“ mower deck for this John Deere 332 that I am currently rebuilding. Hopefully the snow goes away so I can try it out soon😁

It shouldn’t be too hard to push. On the right side in front of the rear wheels there’s a bypass for the hydraulics to make it easy to push

@WorkshopRebuild

Жыл бұрын

That is correct, the lever to activate the check valves is on the right side of this tractor. Even when pushed the lever down, this tractor was very hard to push and it wasn't any easier than the JD 317 or JD 300 that I have. The hydraulic rear end is very restrictive and it should never be pulled or pushed quickly, because you want the fluid to pass through the check valves. The John Deere 400 on the other hand is much easier, because you have a 2-speed transmission behind the hydraulic motor and you can luckily put it into neutral.

If you want a little more oil filtration, the Wix 51356 is the longer version of the 51365.

@WorkshopRebuild

2 ай бұрын

That's awesome! Thanks for sharing this tip

i'm looking for a I think it's a breather hose for the 318 it goes on the bottom of the air cleaner it must suck air in it i think but maybe uou know where i can find one john deere dosent have them

@WorkshopRebuild

Жыл бұрын

I am not familiar with the JD 318 Onan engine, but yes every engine has a small breather tube. I will do a search on this later today and get back to you with some information. I hope I can help you out. Regards Andreas

What are those front tires and what size are they?

@WorkshopRebuild

5 ай бұрын

The tires are called Carisle Sport Trail, not sure on the size.