LEATHERMAN WAVE MODS HAMMER DIY
Ғылым және технология
Leatherman MODS HAMMER DIY
2 LEATHERMAN MODS
1 HAMMER
2 LANYARD
This extraordinary mods can be attached for outdoor activities or bushcraft and can be used for leatherman wave charge surge al or alx. Just install
into clip.
2 Fluorescent lanyard
so you can see where your tool is with poor light or easily find with flashlight, or keep it always in your hand and make sure you ar not gonna lose
this great tool.
1 The amazing hammer
very useful for traps, camping tent installation.. nailing.....don't worry you are not gonna damage your tool, and it is heavy
weight, which helps.
OTHER VERSION PLUS:
3 Emergency ferrocerium flint rod or fire starter magnesium rod.
you can make fire very easy, it is attached with glue gun,
so you can replace it easily once is death. Same thing with
diamond sharpener
4 diamond sharpener,
because you don't want to be
outdoor and realize your knife isn't sharp.
I hope you like it, if you are gonna try to diy make sure to use very good hardwood.
If you like it please subscribe.
c u next movie.
Пікірлер: 462
get this guy a milling machine. hed be unstoppable
@greasysteve5671
5 жыл бұрын
Anything is possible when you're a machinist
@zZz777
5 жыл бұрын
👍 Thanks Randall Calhoun I have to make some money first
@jakobburkhardt4988
4 жыл бұрын
@@zZz777 Make a kick starter!
@MyUnquenchableThirst
3 жыл бұрын
@@zZz777 sell plans from mods. I want so many of these!
I just can't even imagine what this guy could fabricate with a fully furnished metal shop!!! Congratulations on your craftsmanship!! Keep up the good work!! You got my like and my subscription to your channel!! You are awesome!!
@zZz777
4 жыл бұрын
👍 Thanks Chapulinero Nice words 💤
This build and the music -> EPIC!
@zZz777
4 жыл бұрын
👍 Thanks a lot WJ 💤
Man... you need to make this! I’ve just used the tool itself sometimes. This is so much less destructive!
Amazing... You need to produce this commercially my man! Def would buy it if it was available.
You should send this to leatherman. Great job !
@zZz777
5 жыл бұрын
👍 Thanks 3 River Blades
@algonquin5484
5 жыл бұрын
Too bad leatherman doesn't take customer feedback. Just look how many years it took them to put replaceable wire cutters on the wave, and that is just one example.
@greasysteve5671
5 жыл бұрын
@@zZz777 is that 40 thousandths steel shim stock for the clip? Great job on your projects by the way, you'd make a great machinist!
@_hawawa4930
4 жыл бұрын
Kino C Not everyone wanted a MUT. Moron!
@pjdaprinz
4 жыл бұрын
@@algonquin5484 From the Leatherman FAQ: IS LEATHERMAN INTERESTED IN MY IDEA FOR A NEW PRODUCT OR FEATURE? Always. Consumer feedback has played a significant role in improving our existing products and designing new ones. Our marketing department tracks suggestions and welcomes your feedback, so feel free to address your ideas to them (either in writing or at info@leatherman.com). If you wish to submit an idea for which you already have or may obtain a patent or other ownership rights, please write to the Office of the President, Leatherman Tool Group, PO Box 20595, Portland OR 97294. Prior to receiving or considering your idea, we will present you with a disclosure agreement that describes your rights and ours in any idea you disclose to us.
When it finally clicked into place at the peak of the crescendo I loudly exclaimed “F@?$ YEAH!” While on the toilet as if the achievement was my own. Great work I’d totally buy one
@zZz777
3 жыл бұрын
😂😂😂
anyone else thought from the thumbnail, he's gonna use a lot of powertools? lol only a dremel! wow
Какая титаническая работа проделана. Я в шоке! Но результат стоил этого! Сколько замечательных идей вы реализовали и поделились с нами... За это особая благодарность вам! В очередной раз убеждаюсь: Вы лучший!!!
@zZz777
5 жыл бұрын
👍 спасибо тебе Demian Isaev большое спасибо
@arvidlindstrom6294
5 жыл бұрын
@Randy Bingham Простите, но непонятно что вы имели ввиду ... Вы писали на Гаранди или на Хинди?
that's so slick... and exactly what the wave needs
Dang that's incredibly cool! Nice job showing the process
@zZz777
5 жыл бұрын
👍 Thanks Soupcan13 💤
Came for the Mod - Stayed for the Mod and the Music! Bravo!!
Man your patience and your talent amaze me. Great choice on Tchaikovsky too
@zZz777
3 жыл бұрын
Thanks Chlo
Man!!!!! This guy loves Leatherman
@zZz777
5 жыл бұрын
👍 Thanks chronoboat I hope Leatherman loves me too
Te felicito....Excelente trabajo
@zZz777
5 жыл бұрын
👍 Gracias Alonso Franco
A lot of Dremel consumables were lost in making this movie ... but it sure was worth it. Enjoyed every second watching it.
One of the best build videos Ever!
@zZz777
3 жыл бұрын
Thanks
Nice job!!! You're doing some good work there craftsman...leatherman needs to take note and consider this as a wave option. Hurry up and patent it!!!
@zZz777
5 жыл бұрын
👍 Thanks Patrick Rowe 💤
@jonathanlloyd2306
5 ай бұрын
You cannot patent something once it is in the public domain . . .
I love that it's set to 1812 Overture. Amazing work as always, zZz
@zZz777
3 жыл бұрын
Thanks Tom
That’s an amazing mod!!! Well done sir!
@zZz777
5 жыл бұрын
👍 Thanks Sir Mark Be 💤
eres el maestro de la improvisación lastima, que la fabrica leatherman no te ha ofrecido trabajar para ellos, tanto talento no se debe desperdiciar, mi mas sincero reconocimiento y respeto gracias
Pretty sure this was the most satisfying thing I’ve seen in a while. Well done sir. Wanna make one for my surge? 😂🙌🏼👌🏼
@zZz777
3 жыл бұрын
Thank you Sir ....sorry I am busy
@JerryGray-YankeeDude
4 ай бұрын
Dito that! 👊
master genius Leatherman gadget inventor
@zZz777
5 жыл бұрын
👍 Thanks John Wesley Hardin
You are so good at what you do looks like a real letterman product
@zZz777
5 жыл бұрын
👍 Thanks ZT Super22335566
Excellent work, lovely design, hell of a lot of work and I love it.
@zZz777
5 жыл бұрын
👍 Thanks 8th sinner
What a good improvement 👍
Exelente trabajo
@zZz777
5 жыл бұрын
👍 Gracias Pedro Eugenio Pezzana
Great mod dude!! Congrats!
@zZz777
5 жыл бұрын
👍 Thanks dobermansnp
very creative..great execution as well, but I will just use a handy rock (which is up to my skill set). You have wonderful design and hand tool skills!
@zZz777
4 жыл бұрын
👍 Thanks Paul When I made it I was thinking for nailing (small nails) Works well 💤
NICE ... I had to spam Leatherman's facebook and twitter page with this !!! AWESOME
@zZz777
5 жыл бұрын
👍 Thanks Fuzzypictures
Мужик, ты сделал мой день! )) Очень оригинально, прочно и эргономично что нагрузка равномерно надеюсь ложится на корпус. Я даже не смог удержаться и подписался на тебя! К сожалению нет у меня возможность сделать такие вещи (хотя ОЧЕНЬ хочется). У тебя золотые руки и видно что ты занимаешься любимом делом. Этот чудо молоток и тот который пилкадержатель на подобье Surge - ВЫСШИЙ пилотаж. Такой подход наилучшее технические решение как доп-оборудовать Multi-Tool на все случай жизни! Ты меня вдохнул приобрести это чудо Multi-Tool, что после этого ролика твоего заказал себе в интернет магазине новенький Wave+ black, не помешало-бы такие решения, думал приобрести оригинал пилкадержатель от Surge и ставить в свой... Смотрю много ролики и советуюсь, говорят что не возможно оригинал установить, другие проблемы возникнуть как по толщине так и по длине. Конструктивно не подходят, проверено! По мимо всего этого, там еще входит зубец в корпус пилкодержателя для прочного удержания пилок, имею ввиду на новый Surge! Привет из Московской Области!
Wow, that is very impressive...
@zZz777
4 жыл бұрын
👍 Thanks James 💤
I love it nice work. Would like one on my surge. I would rarely use it but it'd be nice to have in a for those times you really need it. I caught the outside edge of my hand hammering with a leatherman before and it hurt like crazy.
@zZz777
4 жыл бұрын
👍 Thanks Granite 💤
New sub. I would buy one for both my Surge and my and my wife"s wave plus's. If they were $20 a peace or less!!! Awesome job !!!
@zZz777
4 жыл бұрын
👍 Thanks tmapes 💤
Cheers Mate! You are just Awesome.
@zZz777
5 жыл бұрын
👍 Thanks Refai Abdeen
@refaiabdeen5943
5 жыл бұрын
zZz 777 Mate, How are you ! I was wondering if you could make me a set of mods please. I will pay for it.. My number is +61438377771 you can contact me on WhatApp or Viber. You could email me at refai.abdeen@gmail.com I look forward to hearing from you are Amazing!
Now I better understand what a piece of ingenering is in that pommel! And I can appreciate it!! Well done!
Very nice workmanship! 😎👍🏻
@zZz777
2 жыл бұрын
Thanks
Mesmerizing. I love this idea and watching it was awesome
@zZz777
3 жыл бұрын
👍 Thanks Duke 💤
Все замечательно, но мне кажется, что для Surge с его весом, такой молоток лучше бы подошел))) Отличное и познавательное видео!
Excellent use of patience! Wow
@zZz777
3 жыл бұрын
Thanks
@zZz777
3 жыл бұрын
about patience......kzread.info/dash/bejne/gY18xrmNpMi0oMo.html
Great job!
@zZz777
5 жыл бұрын
👍 Thanks Tdg0101
The 1812 overture was a fun touch
I'm curious how much Leatherman spends on R&D every year.. when they can just watch KZread. Great job, great idea, great tool!
Beautiful!
That is awsome work, I hope leatherman sees this and pays you for the awsome protype
@zZz777
5 жыл бұрын
👍 Thanks Aaron Jacobs
@funnyfarmdad9997
5 жыл бұрын
You sir are a GENIUS!!! Do you sell these things?
Cool. I’ll take one!
Holy cow !!!!! You sir sure know how to use a file ! Wonderful work !
@zZz777
4 жыл бұрын
👍 Thanks Reno 💤
I would think adding a hammer like this would make it more heavier. Plus banging on the end like that over time is going to mess up your tool. Clean work and a great job.
@zZz777
3 жыл бұрын
Thanks. Not yet
My grandpa wil be proud of me, listening to classic music for sixteen minutes
@zZz777
4 жыл бұрын
👍 Me too 😎 💤
the music adds so much depth to this video
I sat breathless for 16:55! LoL The music evoked greatness. You sir: much respect! Nice!
@zZz777
3 жыл бұрын
👍Thanks
Sick work
@zZz777
5 жыл бұрын
👍 Thanks Chorax M
Odličan posao!
Awesome work brother. You should patent this get a finical backer and make millions!! Just a suggestion.
@zZz777
5 жыл бұрын
👍 Thanks red beard
Yeah, I'd buy that for my Leatherman Surge...
@603dougie603
4 жыл бұрын
Was thinking the same thing.
Wow great work... Really like it...regards
@zZz777
5 жыл бұрын
👍 Thanks Annika
good thing you also taught me how to make a noose ..
@zZz777
5 жыл бұрын
👍 Thanks Delilah's Last
Good job man! Looks good
@zZz777
5 жыл бұрын
👍 Thanks Brandon 💤
Well done man 👍
@zZz777
5 жыл бұрын
👍 Thanks so steve
I don’t get easily impressed; I’m impressed :)
@zZz777
4 жыл бұрын
😃 Thanks Jan 💤
Very clean finished product, definitely got a subscribe from me. Personally I.would have used a small recessed machine screw or two to affix the hammer face to the unit but I'm interested know if the epoxy holds up to the task of hammering. If not perhaps JB Weld?
@zZz777
3 жыл бұрын
Better to weld Epoxy working good so far
Stunning work
@zZz777
4 жыл бұрын
👍 Thanks William This one is similar kzread.info/dash/bejne/iZidyLWHZMvSoKg.html zZz
best silent movie ever!!! love it!
great job
@zZz777
5 жыл бұрын
👍 Thanks Nicolas Rouelle
Thank you for the classical music. Its soooooooooooo much better than the pop rage dance music.
@zZz777
4 жыл бұрын
👍 You are welcome Paul 💤
I would like to see one made for a Leatherman Skeletool
Wow good stuff man!
Great Job!!! Will Steel (Pun Intended)/Borrow some of these Ideas...
Super!
@zZz777
5 жыл бұрын
👍 thanks Rene Kleisman
Great job 👏
Wow impressive!!
Liked. Very impressive dedication and skill. But you know, with the saw, you can cut yourself a serious hammer out of branch unions.
@zZz777
5 жыл бұрын
👍 Thanks Remember The Slap Films 💤
Really it's good idea. I miss hammer in my Wave but You could use rivets instead of epoxy glue and in my opinion wave buttside should be protected with polymere or rubber in the surface of joint with hammer module.
Nice build but dam I just dont have that much time, but nice.
@zZz777
5 жыл бұрын
👍 Thanks ONE %er Yep it takes some time 💤
great job!
@zZz777
4 жыл бұрын
👍👍👍
Damn impressive!
@zZz777
3 жыл бұрын
Thanks Ignacio
A lot of work there. Good idea. This would work so well with my camp kit. A CNC and mill would have made this job so much easier.
@zZz777
5 жыл бұрын
👍 Thanks SmoothbassmanStudios I know
You would make a great cell mate.
@stretchmfe4913
5 жыл бұрын
I guess there's a lot of dremel tools, hammers and files in jail?
Awesome job! I always wanted a hammer mod for wave after seeing the signal.
@zZz777
5 жыл бұрын
👍 Thanks Meowian Overlord Me too You may like these kzread.info/dash/bejne/iZidyLWHZMvSoKg.html kzread.info/dash/bejne/qqJpu6mAo9uZl8o.html
Very nice work!
@zZz777
4 жыл бұрын
👍 Thanks David 💤
brilliant
@zZz777
5 жыл бұрын
👍 Thanks Muhammad Loonat
Great work! Subscribed
@zZz777
3 жыл бұрын
Thanks
Many cutting discs were harmed in the making of this video.
Top work.
@zZz777
4 жыл бұрын
👍 Thanks Andrew 💤
Cool video!
@zZz777
5 жыл бұрын
👍 Thanks 0m3n
Nice idea and excellent application. OR you can get a rock.
Best mod on surge. Make me one .
I'm surprised the epoxy held, probably should've made the entire block out of one piece of steel, or at least welded the clip in place. Otherwise, genius idea. Now do stuff for the Leatherman Surge. ;-)
@zZz777
5 жыл бұрын
👍 Thanks Tex Arcana That was the idea, but I do not have a welder. I tried to solder with tin, but the clip is stainless and it did not work. Anyway epoxy worked well so far.
@MrAngelarm13
5 жыл бұрын
Look into brazing with brass!
@zZz777
5 жыл бұрын
👍👍 Thanks a lot Albert Reed
Congratulations for your nice and beauty work. Two questions: 1 name or kind of glue 2 name of overture. Thanks
"V2 out of Aluminium..."looks great 👍
@zZz777
5 жыл бұрын
👍 Thanks Jorkki !
Why mince words here? I have but one: Genius! Nuff said.
@zZz777
4 жыл бұрын
👍 Thanks ShempBob zZz
Very cool
Вообще молодец !!!!!
@zZz777
5 жыл бұрын
👍 спасибо тебе Александр Стариков
When I saw the thumbnail, I assumed this had been made made a milling machine. I can't believe it was even possible to make it with hand tools! I'm seriously impressed.
Gold hands! Like!
@zZz777
3 жыл бұрын
Thanks Thanks Valter Valter
You are a true genius you should patent this
@zZz777
4 жыл бұрын
👍 Thanks CLAUDIO 💤
Nice job
@zZz777
5 жыл бұрын
👍 Thanks Pippin 9er 💤
Awesome
@zZz777
2 жыл бұрын
Thanks Jason
Brilliant. Do you sell them?
Cool mod. What the first song in the video?