LARGE Pasta Board Build - Maple
Purchase this board (Canadian orders only): www.cooperbuilds.ca/shop
In this video I show you how I made a large reversible maple pasta board. Also known as a dough kneading board, this surface is great for baking without making your counters a mess. The board is made from premium maple hardwood. The surface is held together with biscuit joints and wood glue. The sides of the board are also held together with biscuits but with larger slots and have an additional screw in each corner. This was designed to allow the main part of the board to expand seasonally. The board is 39" x 21" and 3/4 inches in thickness. The 1 1/4 inch maple lips allow the board to "hook" onto the side of the counter so it does not shift when in use.
Thanks for watching!
Пікірлер: 26
This is simply awesome!
I like your dough/pasta board, I’m over here in Scotland, I generally make charcuterie boards. Mainly as a hobbie, but have been asked to make a similar board that you have made yourself. I also noticed that old Diamond Back Mtn Bike in your workspace must be a 90’s model with that paint design. Happy wood working.
Nice piece of work and your best video ever! Thnx!
Oh how I need this pasta board!! Do you have a site that I could purchase one?
@calvin.cooper
2 жыл бұрын
Hi! My website is www.coopercreations.ca/shop
for the sides (lips) - what size board did you use? are they 2" Thick or did you stack/glue boards?
@calvin.cooper
Жыл бұрын
the part that sticks up (lip) is a 1.25 x 1.25 inch piece that is glued along the edge to allow it to catch on the side of the counter. I also used 2 screws hidden under some wooden dowels to hold it in place
I'm curious if the opposite gran direction of ends caused problems.
@calvin.cooper
Жыл бұрын
It does not. Im assuming your referring to wood expansion. The board is designed to allow the wood to expand through the seasons. The reason for the side peices on the ends is for aesthetics and helps keep the board flat over time.
@timrenaud8673
Жыл бұрын
You glued the biscuits that were cut larger in place, thus locking them in place and not allowing the wood to expand.
Can the reverse side be used for a cutting board?
@calvin.cooper
Жыл бұрын
yes it can!
Do you sell these? Where are you located? Very nice work!
@calvin.cooper
9 ай бұрын
Hi! Yes I sell these online and ship to anywhere in Canada. www.coopercreations.ca/
How do you maintain it?
@calvin.cooper
10 ай бұрын
I recommend cleaning the board with a damp cloth after each use. Every few months you should add some mineral oil and beeswax (I sell board conditioner or any cutting board conditioner from Amazon works). This helps keep the wood from drying out!
Is the glue toxic? What type of glue do you use?
@calvin.cooper
Жыл бұрын
I use Titebond 3. It is waterproof and food safe
@lauratempestini5719
Жыл бұрын
I live in USA NE state. Do you ship to USA? What type of wood?
Actually dimensions?
Your dimensions of your board? True cr aft a ship,,,
@calvin.cooper
Жыл бұрын
board measures 39 inches by 21 inches. Thank you!
@lauratempestini5719
Жыл бұрын
@@calvin.cooper Thank you for promptly responding!!!, Truly beautiful!! I have been watching several l videos on pasta boards and your s shines!
@lauratempestini5719
Жыл бұрын
Could you alter the dimensions to say 24”x36”. In my experience I roll the dough forward more than side ways. Therefore more depth than width would make sense
@calvin.cooper
Жыл бұрын
@@lauratempestini5719 Yes. the board can be build to any dimension
Calvin this may help you. kzread.info/dash/bejne/nm2a06WDZc6wmaQ.html