Hi everyone. Some people experiences issues with PLUGINS folder. I just extracted (2 min ago, as I changed PC) all the Klinke files in [C:\Program Files\REAPER(x64)\Plugins\] and it worked well for me. However, some other user (thanks @Atezian !) pointed out, there seems to be another folder where you are supposed to extract files. I didn't see it but it is written in the PDF file included in the Klinke extractable files, in the "installation" section. For that : - Open REAPER, click on [Options>Show REAPER resource path in explorer/finder ...] - Go to [UserPlugins] - Extract all the Klinke files in the [UserPlugins] file here. For me it worked the same way as extracting it in the PLUGINS folder of Reaper. But I hope this can help !

All you have to do before connecting the nanoKONTROL 2 to your computer is hold down the SET MARKER button along with the main RECORD button, and then plug in your USB cable. This will load the template for Cakewalk Sonar. You’ll notice the record button blinks a few times after it’s connected, to let you know you’re in Sonar mode. Although that template is designed for Cakewalk Sonar, it works perfectly for Reaper, if you set Reaper correctly: 1. Start Reaper of course… and then go to Reaper’s PREFERENCES (CTRL-P), go into Control Surfaces (left menu, near the bottom). 2. Click ADD and Reaper will ask you what kind of Control Surface Mode…. choose “Mackie Control Universal.” 3. Then choose your MIDI input and output to be “nanoKONTROL2”. Done. Now, once you’ve exited Preferences, you’ll see that the nanoKONTROL2’s buttons respond perfectly in Reaper… all mute/solo/arm record buttons work for every track, the faders work for the track volumes, and the knobs work for the track panning. You’ll also notice the transport controls (RECORD, PLAY, STOP, REWIND, FF) all work in Reaper as well, and of course.. the SET MARKER and marker left/marker right buttons all work, too. If you have more than 8 tracks loaded (say, 16, or 24), you can use the TRACK buttons to navigate your track groups.

@ondinnonk

5 ай бұрын

thank you for this. this saved me so much headache

For those people like me who could only get response from the pan controls - make sure the nanoKontrol2 is in SONAR mode. You can set this in the Korg Kontrol editor under Control/Common/Control Mode. Or it can be set by unplugging the USB cable then re-plugging while holding down SET and the Record button - the record button will flash.

Manh - This was just what I needed. Thank You. I Had spent hours trying to configure the Nano. Well Done!!

@Manhsterz

3 жыл бұрын

You are very welcome ! Always a pleasure if it can helps ! Cheers and thank you so much for your feedback

I did this on my own several years ago. When I set up my new studio I needed to do this again and I found you video! Thank you so much. You have done all the leg work. Combine this with new updated drivers and I could not be happier. 😊

@Manhsterz

2 жыл бұрын

Hey, I am so glad that it helped you haha. To tell the truth, when I have to set up again my home studio, I lso have to refer to this video as well... unforunately it is not as simple as "plug and play". Have a good musical day !

Sir, Thank your for your time and effort you put into this tutorial. You are a gentleman!

@Manhsterz

2 жыл бұрын

The pelasure is really mine. I am very joyful that it helped you ! And thanks for passing by my channel :)

Thank you for making this video bro. It helped me out quite a bit. I appreciate you.

@Manhsterz

3 жыл бұрын

You are welcome mate ! Thanks for you feedback I really appreciate

Just....wow. Very thorough. So helpful!

@Manhsterz

2 жыл бұрын

Hey, I am so glad that helped you ! Thanks for visiting

Very clear explanation .... after many similar ones but useless. Thanks!

@Manhsterz

3 жыл бұрын

Thank you for you feedback I relaly appreciate it ! Always happy to see I could help

Hi there. Thanks for your video. It was really helpful and straight forward following your instructions. I finally got my nanoKontrol 2 working really well! now. Hence I'm subscribing to your channel. Cheers!

@Manhsterz

2 жыл бұрын

Hello Joehen ! Thank you so much for you warmful comment, I really appreciate ! As I try to be helpfull, it is always very cool if this can help ! Thanks for subscribing, I don't have much time right now to post new contents but I'm working on new video game music covers. Take care and cheers !

Excellent. Very clear!!! As just an FYI, my original setting at 7:25 was "Live" not "Sonar". And at 8:55, I did NOT delete the Control Surface OSC. Deleting it caused the NK2 to not work. But other than that, everything worked as you described.

@Manhsterz

3 жыл бұрын

Thanks for your feedback ! The pleasure is mine. It will help others also.

Excellent. Concise. Thanks!

@Manhsterz

3 жыл бұрын

Thank you I really appreciate your feedback !

Ive been trying to learn how to do this for my youtube sound quality! thanks for sharing 👍🏻😊

@Manhsterz

2 жыл бұрын

Pleasure is mine ! Thank you for commenting !

You're a legend! this really helped me out man!

@Manhsterz

3 жыл бұрын

Haha I am so glad you also managed to install that nanokontrol2 ! It's quite a good hardware. Thank you so much for watching !

Very useful! I think it's good idea to buy this stuff. Thanks!

At 5:36 you illustrate a problem with the knobes in Option 1. To fix this you need to use the "Mackie Control Protocol B (Klinke v0.0.03)(dev 4.4)" which is a slight update from the one you are using in this video for Mackie Control of Reaper.

yea i got lost along time ago, gonna try to keep watching this till it makes sense.

Thank you. That is a very useful video.

@Manhsterz

3 жыл бұрын

Thank you for your feedback !

I Assume the process should be similar to use Nanokontorl with Studio one , I've been trying to connect this device with SO with no success, I'll follow the steps you mentioned here hopefully it will work as well. Thanks in advance!

@Manhsterz

Ай бұрын

Hi there. I don't use STUDIO ONE, I don't know if it is the same process but I hope it will work for you ! It is a shame that setting up the NK2 is not as easy as "plug and play". Hope you'll find your way.

Merci ! :) C'est exactement ce qu'il me fallait!!

@Manhsterz

3 жыл бұрын

Le plaisir est pour moi ! Merci pour le retour ;)

This is the only video that I found that helped me!! Thanks. Is there a way to combine both methods and only have the custom controls work on vsts and still be able to use the faders in your daw?

@Manhsterz

2 жыл бұрын

Dear Scott Riley, thank you so much for your feedback, I really appreciate it ! Makes me happy whenever I can help someone. Currently I don't know how to combine both method, as one is automatically taking on the other. What I would recommend is to use the second method and to reassign each fader to different track (track 1, 2 ... 8) and each button manually..this is actually what I use. Since I rarely use the 8th fader for track volume control, I keep the 8th fader to personnaize it for dymnamic controls. If I have a cue I'll tell you. Cheers !

Thanks for the advice

@Manhsterz

2 жыл бұрын

The pleasure is mine, thanks for visiting my channel ;)

Hi, thank you for sharing this workaround. I'm looking into buying one of these and I have a question. I have seen that the faders/knob will work in groups of 8 tracks (1-8, 9-16, 17-24 and so on). So let's say I have set the volume/pan for the first 8 tracks (1-8) (therefore the faders/knob will not be centralized) and I'll move to the next 8 tracks (9-16). Suppose also that tracks 9-16 already have volume/pan set on DAW and that I just want to slight adjust them. To be more precise, let's say that pan 1 will be at at 8 o'clock in the nanokontrol and the pan at track 9 in the DAW is at 1 o'clock. The moment I try to adjust the pan in this track, it will bring the pan from 1 to 8 o'clock (therefore messing my previous setting on the DAW)? If so it seems a major issue if you work with multiple tracks. Sorry for the long question.

@Manhsterz

Жыл бұрын

Hey thanks for your feedback. This is actually a very good point... I never used the knobs/faders as a group so I never faced this issue. However I believe many users in the comment already had this problem. Here is a troubleshooting from fuadramsey, he previously posted and managed to use "banks of faders". I think the issue you are talking about is related to the "ignore children" thing (then when you move knobs, I believe that it does not consider the intial value (the "children) and just go up and down according to your will). Hope that helps : ***************************************************** Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. *****************************************************

Thanks for this very helpful video. Is there a way to change between presets within the VST your controlling - ie scrolling up or down through them?

@Manhsterz

3 жыл бұрын

Thanks for you feedback it really helps me :). Of course, if what you mean is like : you have 4 tracks, each one controlling a different VST, then you can assign in the actions key, for instance the left and rights arrows on the nanoKontrol to "Track: Go to previous Track" and "Track: Go to next Track"

People who use reaper as a daw of their choice are genius

Love you man ❤

@Manhsterz

Жыл бұрын

Haha thanks foryour feedback ! It is always a great pleasure for me if that helps ! Cheers

Hello Manhsterz, Great Video. Clear and concise. Would you consider making one for ProTools users who want to control Kontakt instruments?

@Manhsterz

3 жыл бұрын

Hey so thank you so much for your feedback. As I told you I am currently using Reaper DAW only for music composition. For now I won't use ProTools or Logic. If plan to use these softwares I I will consider doing a video on it with the Korg nanoKontrol2. Thanks !

Awesome, regarding the track fader...how do i go after the "8 tracks" next to the next set, like if i am mixing 16 tracks, thank you

@Manhsterz

2 жыл бұрын

Hi Tek Rah, It is interesting because I noticed that a lot of people wish to do as you said, managing tracks "bank by bank", meaning the first 8 tracks, then the following 8 tracks. Some times ago, fuadramsey posted a troubleshooting of that topic, managed to use banks of faders. Here is his troubleshooting. Thanks to him again ! ******************************************************* fuadramsey Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ******************************************************* I hope this will help you !

i haven't seen anyone use this with the MIXER exclusively. can you scroll over using the nanoKontrol to control faders #9-16???

Thank you very much - you saved me! I got my nk2 at a bargain price and wondered whether I'm back to times where things didn't work OOTB. The one thing I had problems with is that I can't set pannin to knobs and default "learn" method doesn't work for me - I need to go trhough "param" button. Otherwise it is lovely!

@Manhsterz

3 жыл бұрын

Hey I am so glad that it helped you ! Yeah when I bought that piece of hardware I struggled so much to get it work ! Yup I guess this is one of the biggest advantages of REAPER DAW : flexibility and customization ! Enjoy and make great music ;) Thank you so much for your feedback !

@hideoushiss

3 жыл бұрын

@@Manhsterz Do you experience the problem that knobs change panning on random despite they are not linked to panning?

@Manhsterz

3 жыл бұрын

@@hideoushiss Yeah it happens sometimes. I don't exactly know what is your exact problem, so I'll detail all the issues I encountered : 1/ ALREADY ASSIGNED KNOB - Let's imagine you "learn midi" with know 1 for the volume of a certain VST. So if I open another VST and try to assign the knob 1 again, do stuffs, and try to play the track. Then the knob 1 will be assigned to 2 vst, so the two are going to mix together and that will be a mess. 2/ ZERO VOLUME FOR ASSIGNED KNOB - when working let's say with volume assigned knob (especially with VST Xpand!2), when trying to play the track from the beginning the assigned knob somehow goes to 0 so I don't hear the track. Actually I now try, at the end of my work with the knob and each time, to increase again the knob to the "basal" value, so it cas restart again at that final value. 3/ Others - sometimes and I don't know why, some knobs are already assigned to something... again, especially with Xpand!2 VST. So I just UNlearn them all and start over. Hope that will help !

@hideoushiss

3 жыл бұрын

@@Manhsterz I found a different solution - I went and assigned knobs CCs way higher (starting from 80) and it worked. I currently have set up everything as I needed. The click-learn thing didn't work for me but I just used a shortcut to pop up learn window and it is almost as fast. Kudos again to you. I got mine used so I was worrying that it was internally messed up in some way. The biggest thing here is to actually dive deep into Korg editor and change the way controller works.

Thanks, Manhsterz, for the clear explanation! My problem is that, if I use method 2, then the indication for Nanoкontrol does not correspond in any way to the current status in the Reaper. It would be great if there was a way that would allow, for example, to arm a channel in Reaper and the Nanokontrol indicator would also reflect this.🤔

@Manhsterz

2 жыл бұрын

Hey ! When you say the "indication [...] does not correspond [...] to the current status in Reaper", do you only refer to the buttons on the NK2 not lightning up when let's say you arm a track ? But all the other features work right ? I recently checked the forum on Reaper's website but did not find anything about that... I guess the main issue is that there is no actual plugin for the Korg NanoKontrol 2 in Reaper. It seems not attracting much attention to the Reaper company to develop an update taking into account this hardware. One way I would think of is to set, let's say the "R" button as a track arming, and in Korg Editor, to set each "R" button as "Toggle". By doing so, it will flash up red when you press on it, and arm the track, and will go back unlit when pressing on it again, disarming the track. But If you arm a track by pushing the button (so it's flashing on red), and disarm the track on the software with your mouse, then the button on the nanoKontrol won't unlit. I guess this is what you experienced. If I have some news I'll come back to you. But I hope Reaper will see that there is a lot of nanoKontrol 2 users on Reaper. Sorry for not being of great help ! Cheers and happy new year

@vale821

2 жыл бұрын

@@Manhsterz Thank you for help, Manhsterz! Perhaps, to solve the problem, it would be enough to disable some functions in the Klinke driver. Thus, it would be possible to use methods 1 and 2 at the same time. For example, I am satisfied with how the buttons with indication work (method 1), but I would like to set up (method 2) all the controls without indication myself. Thanks a lot for the work you've done!

Thank you for sharing this video-it was very helpful-solved a problem of mine with toggle/momentary selections. What I didn't manage is, although my Reaper sees Mackie Control Klinke, it doesn't work. I have to go to action list to assign every button seperately, in order to make it work. Any ideas?

@Manhsterz

3 жыл бұрын

It's all my pleasure is that helped you, I am very glad ! For the Mackie Klinke, do you use MACOS or WIN10 ? Because if you use MACOS, there is another method here where someone seemed to have developped a tool for using that controllers with OSX : forum.cockos.com/showthread.php?t=207844 This Reaper forum's link will bring you to another Reaper forum's page, and in this latest, post #29, one MAC user says it works very well. Hope it will help you !

@WitchcrafterPan

3 жыл бұрын

@@Manhsterz Thank you for the quick reply. The odd thing is that I use windows 10. Dunno what goes bad here.

Hello, dear Harry Potter! I really liked your video. I have a question. The fact is that I watched a lot of videos on this topic and saw different switching schemes of nanoKONTROL2 and Reaper. For example, "SET+REC", "SET+PLAY", "SET+REW" and even "SET+CYCLE". But you personally just plug in the cord and don't hold any buttons. I'm completely confused. Please explain how I can properly connect nanoKontrol 2 and Ripper.

Thanks for this video, I just ordered one of these. Question: Can you use two Korg NanoKontrol2 units at the same time? I could see using one for Transport and track control, and one for nothing but synth control, is this possible do you know? Thanks again 👍

@Manhsterz

3 жыл бұрын

Thanks you Chris for watching ans commenting. I have never tried, but theoretically It should work. These two nanokontrol2 are two separate devices. So if you use the second method I showed, where you assign each button to one specific task, that should work. My only concern would be when connecting both nanokontrol2 and turning on the software Korg editor. But again, I think the two devices should be identified as two different ones. If I have more info I'll let you know ! And also I'd you tried let KZread know ! Thank you very much

@RauBogdan

2 жыл бұрын

I was wandering the same thing a few days ago, so I bought a second unit. Yes, it is possible to install two different NanoKontrol2 units, one for transport and track control, and the other one for synth control (cc).

Do you need a daw to use the nanoknotrol or can you connect it directly to a keyboard

Hi, thanks for the video! Do you know if you can switch between scenes in the controller. I saw some other controllers can switch from scene or layer, so you set scene one to control daw faders, etc, and scene 2 to control plugins or send, etc.

@Manhsterz

3 жыл бұрын

Hi Erick, this is the troubleshooting of fuadramsey, he posted few weeks earlier and managed to use banks of faders : ********************************************************* fuadramsey 4 weeks ago Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ********************************************************* I hope this will help you

@produtorkleberlima3106

2 жыл бұрын

@@Manhsterz I couldn't do that. Can you help me please?

Congratulations on your video. I have a doubt. Example, if I am going to configure the volume of the tracks in the sliders, I can only configure it from 1 to 8? can't I also extend to 9 to 16 and so on?

@Manhsterz

2 жыл бұрын

Hi there, thanks for your visit ! Here is a troubleshooting for this exact issue from fuadramsey, he previously posted and managed to use "banks of faders" : ******************************************************* Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ******************************************************* I hope this will help you

@produtorkleberlima3106

2 жыл бұрын

@@Manhsterz thank you so much

Hi , Thank you for this video. But, please could you tell me in which folder exactly do I have to place the Klinke folder? I use win 10 x64 / Reaper v. 6.72, and copied it to C:\Program Files\VSTPlugins, I also tried to put it in C:\Program Files\REAPER (x64)\Plugins. But Reaper cant see it.

@Manhsterz

Жыл бұрын

Hey, sorry for my late answer. In case you did not manage to successfully install it : - You have to unzip all the files in "Program Files/Reaper/Plugins" directly. In folder you should find xxxxx.dll files. Just unzip into that folder. - Some users have previously reported issues taht Reaper does not recognize that plugin. OPne thin gI advise you to do is to update your reaper software. Normally you should be set, Reaper should recognize after doing that (I am also using windows 10). I really hope that helps you !

Hi, ok I just got my NanoKontrol2 and followed your instructions, it works .. however when I move the sliders not only does it move the volume slider .. but it also moves the pitch bend wheel on all my VST synths, and idea what I’m doing wrong? Thanks so much!

@Manhsterz

3 жыл бұрын

So you mean that you want to use the NK2 as a user interface with the Mackie plugin ? Hum, then you might want to check the button assignment for your "pitch bend wheel" in the "actions" > "show action list" and forget the midi control on that. Or maybe you can also click on your VST "pitch bend wheel" and select "forget midi CC". If the NK2 doesn't control weirdly the pitch bend wheel, when you disable the mackie plugin in the OSC/Web option of Reaper, then you can always disable that Mackie plugin and re assign all the knobs and fader to what you want (volume of each tracks etc) and save the Reaper keymaps file. You'll be able to load all the actions keys you have newly assigned later by importing the file on reaper. I hope this will help !

Thanks for the video. I can't get the Klinke thing to show up in control/osc/web in preferences. I have installed everything correctly, all files are in the correct locations but it doesn't show up in preferences.

@Manhsterz

2 жыл бұрын

Hi there, hum, this is kind of bothering me because another user in the comments also mentionned that a year ago (that was Sam Kemp). Another user troubleshooted that same problem 3 weeks ago (Moony), by updating the Reaper software. Then he managed to see the Klinke pluging on the "OSC" tab. So maybe you can try to update Reaper first to see. Hopefully, it will work :)

Question, what settings do I need to use to get the get the Mute to stay on. I can only get it to stay my holding the mute button down. When I let go, it unmutes. I have tried using "Absolute" and the other two options . Which action should I use to Mute and Unmute a track?

@Manhsterz

2 жыл бұрын

Hi there, it seems the button behavior "momentary" has been selected on the Korg Kontrol Editor. You can try this : plug in your NK2, open Korg Kontrol Editor, assure yourself that the NK2 is detected by the software (if not, update the NK2 driver), on the "Communications" tab, click on "Receive Scene Data". It allows the software to fetch the current NK2 set up. Then, click on the first "M" button of the first slider (I assume you to use that button to mute the 1st track and so on), and on the bottom part, select as "Button Behavior", "Toggle". Instead of "momentary", "Toggle" change the state to "on" when you push it, and only returns to "off" when you push it again. Whereas "momentary", as it says, turn "on" on push, and "off" on the release. Then again, "Communication" tab, and "Write Scene Data" and confirm. It will send the set up and erase the previous one from your NK2. Restart reaper, adn it should work ! I hope at least :) I hope this is useful

What does the "Mackie" selection have to do with this? Is this specific to a Mackie Interface?

@Manhsterz

3 жыл бұрын

Yeah as far as I read of forums, we choose Mackie controller because it seems that this midi controller is kind of universal concerning its control assignments. So for Reaper, it thinks we use a Makie controller (not having KORG nanoKontrol2 in the settings) to simulate all the controls. But in reality we use another one, the Korg one. It is just a trick

Thank you for your video. I just received my nanoKontroll 2 and wanted to use it with Reaper with the first option since this is exactly what I need. However the issue is the Macke Control (Klinke) just doesn't show up in my List. I put the extracted files (one Folder "MCU" and the four reaper_csurf_* files) in the Plugins folder but the thing does not show up. I even tried to put it in the UserPlugins folder as described in the User Manuel. Do you happen to have an idea what could be wrong?

@WildsevenMusic

2 жыл бұрын

Nevermind, maybe its a good idea to update your software every now and then. Thanks for your video!

@Manhsterz

2 жыл бұрын

@@WildsevenMusic sorry for my late answer ! Have you managed to get it working by updating reaper software then ?

@WildsevenMusic

2 жыл бұрын

@@Manhsterz No problem. Yes it is working, however one thing I noticed and maybe thats a common thing: The knob position does not match the one on screen. E.g. the pan control: If I put it to the 12 o'clock position in reaper its at about 10 - 11 on the nanoControll. Same goes for the Volume Controll Slider. They have a bit of Dead Zone at the Min and Max position. You know if I can do something about that?

@Manhsterz

2 жыл бұрын

​@@WildsevenMusic That's weird indeed, to tell the truth I never payed close attention to that. Since we are simulating the Mackie cotroller but are actually using the nanokontrol2, I believe there might be a glitch, shifting a bit the values. But I just realied that I only use the nanokontrol by configurating all the knbos myself (without the Mackie plugin), maybe that's why I don't notice that issue. If that glitch causes troubles in your workflow, maybe you can consider re assigning all the knobs yourself without using the Mackie plugin. Reaper allows us to do so in such an easy way :D Anyway, thanks for commenting, and wish you some great times during this end of the year. Musically yours

@TheWatkinsvillian

11 ай бұрын

I’m having the same problem with Reaper v4.62/64. Did you update Reaper to fix the issue?

Let's go to make emotions! 😉

@Manhsterz

3 жыл бұрын

Yeah Let's make great music

I'm using the Klinke method in Reaper but having issues when I use the Auto Punch record. When I select Record auto punch and then hit record with the Nano the mode reverts back to normal Record. Anyone experience the same issue?

Thanks for the video. The problem I have is that nanokontrol2 forgets the toggle setting on the rec and play buttons everytime I open the pc. So I have to reload and sync my settings everytime. I dont know why this is happening.

@Manhsterz

2 жыл бұрын

Hey there, thanks for your feedback ! Do you use the Macki Control plugin, or do you assign the keys yourself ? By "open the PC" you mean for instance, reseting the PC ? Or it happens also when closing reaper and re opening it ? If it's only reaper, try these options : * Try upgrading Reaper to its latest version (sometimes it helps !) * If you assign yourself the keys, in Actions > Show actions list, you can save the key mapping with "Key map > Export". Then you just import them when needed. Remember you have, in that case, to remove "Macki" plugin from the OSC tab. If it's windows, then it means that each time you turn on th ePC, it seems to reset by default your NK2... Maybe you can try to unplug the NK2 before turning off the PC, and when turning it on ? Then only connect just before opening reaper. Sorry I cannot help that much on that :( Hope you will find the way. Don't hesitate to post here it you find out, so you help other people ! Thanks !

@pdkmusic

2 жыл бұрын

@@Manhsterz I finally found what the problem is. I use reaper and cubase 12. When I use cubase, somehow its changing my settings. For example the play button from toggle, goes back to momentary. So I have to reload the settings when I want to use reaper. Do you use other daws with nanokontrol2? Do you have to change any settings? I cant seem to find a solution to use cubase and reaper with the cc mode

Thanks for the video! I have two issues though. I coped with the first one but I don't know what to do with the other. 1) Korg driver is not working. Reaper does not see the device at all. I switched back to standard Windows MIDI driver. 2) After adding Mackie, Reaper tells me that it cannot open MIDI devices for input and output ( Any ideas what to do?

@Manhsterz

Жыл бұрын

It is really annoying that reaper does not DIRECTLY recognize the device, resulting in us taking alternative complex pathways... A/ As I posted on a comment, for some people the Mackie fike has to be unzipped into another specific folder which is indicated in a PDF within one of the Mackie files. Try that maybe. B/ It is surely already the case but make sure to update reaper to the latest version. C/ In the Korg software, make sure your PC recognize the NK2 first, before going to reaper. In fact, you have to tweak settings in Korg software, export it to the NK2 and close he software before going to reaper. If the Korg software is opened in the ame time as reaper, the NK2 will be used by the Korg software, resulting in reaper not recognizing it. Hope that helps...

@goryunovdmitry

Жыл бұрын

@@Manhsterz thanks for a suggestions! unfortunately, all three points are done, but the reaper still cannot open the device. buy the way, does it matter what mode the controller booted? also, maybe I could somehow make their custom drivers work, maybe it would work then

@Manhsterz

Жыл бұрын

@@goryunovdmitry I sincerely hope that someone who encountered the same issue as you and solved it can answer you. I also have heard about the "boot mode" of th eNK2, for instance by pressing some button while connecting it. Honestly, I simply connect my NK2 without doing anything special, and on my system, is works. So I won't be of much help for that part haha 😅. Also, you might be right : maybe if you manage to make the korg driver works, Reaper may recognize the hardware. Good luck mate. And thanks for your feedback! Musically

What if u have 32 tracks? Does this only do 8 tracks or you can select next page to control the other faders?

@Manhsterz

8 ай бұрын

Hello Juanmiguel. There was some time ago a comment which tackle this exact issue. I have never used the NK2 for such purpose, but maybe you can try ? Here is the post : ------ Here is a troubleshooting from fuadramsey, he previously posted and managed to use "banks of faders". I think the issue you are talking about is related to the "ignore children" thing (then when you move knobs, I believe that it does not consider the intial value (the "children) and just go up and down according to your will). Hope that helps : *************************************************** Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ***************************************************

Anybody know why my fader is controlling pitch bend and volume??

Hej for MACOS users, here is the link to a REAPER forum where they help you install the Mackie Klinke controller to Reaper (post #29). It worked for that MACOS user and for others as well (see below in the comments) : forum.cockos.com/showthread.php?t=207844 Hope it will help you !

@youtoobe2936

2 жыл бұрын

I have this (DrivenByMoss) working on Big Sur. The faders don’t work properly but everything else is great.

I've put the unzipped folder of Mackie Control Klinke into the Reaper's Plugins folder ( C://Program Files > Reaper (x64) > Plugins ) and it's not showing up in the Reaper > Preferences > Control/OSC/web > Add dropdown menu. I also can't find a tutorial online of where I am supposed to install this folder. I assume I'm installing it into the wrong location. Any ideas?

@Atezian

2 жыл бұрын

There is a PDF readme in the unzipped file. This shows the correct path to install it. You're not supposed to install it into the folder that the video says you should.

@Manhsterz

Жыл бұрын

Thanks a lot @Atezian. Indeed I didn't see it was writtent in this PDF file. Actually I changed PC, and extracted the files in my REAPER(x64)\Plugins and everything worked fine on my computer... But I guess it might depend, I don't know. But you are right because extracting files following the PDF instruction also worked ! I'll pin a message to tell people. Thanks a lot, wish you a greatr 2023 year !

Great tutorial! Does anybody know where I can find klinke drivers for Mac?

@Manhsterz

3 жыл бұрын

After little search, I found that maybe this one could fit MAC users : bitbucket.org/Klinkenstecker/csurf_klinke_mcu/downloads/

@davidecassaniti4772

3 жыл бұрын

@@Manhsterz it's a DLL file, does it work on MAC? Where should I paste it? thanks a lot!

@Manhsterz

3 жыл бұрын

​@@davidecassaniti4772 Arg you are right you cannot use .DLL file with OSX. After some research on internet I found that forum, who someone seemed to have developped a tool for using that controllers with OSX : forum.cockos.com/showthread.php?t=207844 This Reaper forum's link will bring you to another Reaper forum's page, and in this latest, post #29, one MAC user says it works very well. Hope it will help you !

@davidecassaniti4772

3 жыл бұрын

@@Manhsterz that works perfectly! Thanks a lot!!

@Manhsterz

3 жыл бұрын

@@davidecassaniti4772 yeaaaah makes me happy that it works ! Enjoy music ;)

I've unzip the klinke files onto the plugin folder, but it didn't show up on control surface on reaper. I've restarted reaper for like 5 times, i also restarted computer, i triple check the files, and the files location, it just won't show up on the reaper. What should i do?...

@Manhsterz

11 ай бұрын

Hi there. It seems that for some users the file to unzip in is not the plugin folder. There is actually a little PDF in the Klinke files that you should read: they tell where to unzip the files. Hope that helps !

@CrushingRiffsWreckords

11 ай бұрын

@@Manhsterz Yep, did that already. Options > Show reaper resource path... userPlugin. Still don't work.

qual sua configuração no KORG EDITOR?? não estou conseguindo configurar o nanokontrol no reaper

@Manhsterz

3 жыл бұрын

Esta mensagem foi traduzida pelo google tradutor, peço desculpas antecipadamente por quaisquer erros. No software "Korg Kontrol Editor", nas opções localizadas no meio à direita, escolhi "CC / Número da nota". Isso é muito importante porque é para atribuir valores contínuos aos botões. Então você tem que pensar em "salvar" esta configuração no dispositivo, clicando em "comunicação" na parte superior e em "Gravar Dados de Cena". Então você tem que seguir as etapas nos vídeos, na parte 2. Mas resumidamente, em "opções"> "preferências"> "Dispositivos de áudio / Midi", você deve clicar com o botão direito do mouse no nanoKontrol2 e "habilitado" tanto nas entradas MIDI quanto nas saídas MIDI. Finalmente você tem que seguir como no vídeo (2ª parte), e atribuir a cada botão uma função, via reaper ("Ações"> "Mostrar Lista de Ações") Eu espero que isso te ajude. obrigada

I did everything you showed. Installed driver, unzipped the stuff into reaper folder, I can see the midi device in midi device menu, I enabled them incoming and outgoing. I set it up in Control Surface menu just like in video and nothing works for me. I open up a reaper project and it doesn't work. I try manually setting up short cuts in action menu and as I hit the midi keys or faders nothing is recognized in Reaper. Can you please advice what could be the problem. Using Windows 10 64bit.

@Manhsterz

3 жыл бұрын

Dear colleague musician, in order to try resolving your problem, let’s go through the process step by step seeing if something could be missing : 1/ Korg driver install. So you downloaded on www.korg.com/us/support/download/driver/0/159/3541/ the Korg driver, and checked that it is the version « Windows 10 32-bit/64bit ». I believe it’s currently the « 1.15 r41e » version. 2/ Korg Midi Editor Install. Then you downloaded on www.korg.com/us/support/download/software/0/159/1354/ the MIDI editor software. What I see is the current version seems to be « 1.7.0, Date 2016-03-11 ». 3/ Mackie Klinke control. Then you downloaded on bitbucket.org/Klinkenstecker/csurf_klinke_mcu/downloads/reaper_csurf_mcu_klinke.zip the Mackie Klinke control. And you checked you unzipped that files into the « plugins » folder, inside your « Program Files\Reaper\Plugins\ ». You should have 4 files names something like « …mcu_klinke.dll » + « …mcu_klinke_b.dll » + « … mcu_klinke_b_x64.dll » and + « … mcu_klinke_x64.dll ». 4/ You connect your nanoKontrol2. The PC should make a sound and recognize the device. Then you turn on Korg MIDI editor. Does it ? The first window should show you your device. Does it ? It even shows you in little, the input and ouput. For me it’s « IN : nanoKONTROL2 1 SLIDER/KNOB. OUT : nanoKONTROL2 1 CTRL ». This is the same entries in Reapeer. Then click OK. 5/ Middle Right, you choosed « CC/NoteNumber ». You can make adjustement, like for each button set « Toggle ». When OK with that, on top menu, go to « Communication > Write Scene Date ». So it writes inside you device all the parameter you set. Did you “Write Scene Data” ? 6/ Close Korg Midi Editor. Close Reaper and restart Reapser. 7/ Then just follow the video and it should Work. Tell me if not. Hope that helps !

@dmitriysvlog1239

3 жыл бұрын

@@Manhsterz Thank you for your reply. So yes I did step 1 and 2 just like you stated. On step 3 I extracted everything into the Reaper plugin folder including manual and MCU folder. I since went back and just left the dll files all 4 of them. I see the device in Reaper on Midi setting as well as Control Surface menu. And I set up everything shown in video. The presets of Mackie Klinke does not work still. But since the only step I changed (taking out MCU folder from Reaper plugin) I went in Korg Midi editor and in preferences choose Korg Kontrol 2 as input and output midi an I was able to finally have Reaper see the device in the actions shortcut menu, I was able to start manually mapping the Korg keys with CCs. Here is the problem I notices before and I notice now as well. Sometimes when I launch Korg Midi editor the software sees my device and highlights it, and there are other times it does not see the device. It just shows many devices and does not recognize Korg Kontrol 2. I tried unplugging it from usb and plugging it back in (it makes the sound) but no luck. Because I figured what ever if the Klinke mapping doesn't work I can map it manually which will give me more flexibility. But I cannot go back now to Korg Midi Editor to change some some of the buttons the way they act (mute button or play button). So at the end of the day I can finally use the device to map manually CC commands through the actions tab in Reaper, but the Korg Midi Editior does not see the device no more.. How do I overcome this or what can be causing this? Also another questions if I do map put everything with CCs is there a way to program the buttons to light up for example when you mute or unmute, solo or unsolo? Thank you.

@Manhsterz

3 жыл бұрын

@@dmitriysvlog1239 It's finally a good thing it works ! One important thing is always to make sure you close Reaper before starting you Korg Midi Editor. Because Reaper uses Korg nanoKontrol Entry, it won't be available for anyting else. So make sure NOTHIG is using the nanokontrol entry, then open Korg editor. For the "light on and off", it actually is the "Toggle" options you can set on the Korg Midi editor. That means every time you press the button and release it, it will activate the function. When pressing it once (the MUTE button for instance), it will trigger the function and the light will be turned on. So when pressing back, the light will turn off. Otherwise, it's strange the Korg Midi Editor doesn't recognize your device. It should

Hello, dear Harry Potter. Thank you for your video. But the markers don't work for me. Are not put.

It didn't work for me. I don't know if i'm an idiot or what's the case. Followed step by step but it controls only my pan (not even continously). I would like to control my track volumes, mute, rec, etc, nothing special. Any idea what should i do?:(

@Manhsterz

3 жыл бұрын

Are you using MAC of Windows ? Have you done the processes with the MACKIE control or without ? When you say it "controls the pan", what do yo ucontrol it with ? The faders or the knobs ? Or every faders/knobs only control the pan of each track ? Let's check some points : 🔳 Make sure you download the last driver for the nanoKontrol2. Make sure your OS recognize your nanokontrol when opening the Korg Editor 🔳 For the continous values, you should go to your Korg Editor, and set to "CC" for continous value, for every knobs and faders first. 🔳 Then you have to send the settings to your hardware "Communication > Write Scene Data" 🔳 Let's assume you've downloaded the MACKIE .dll files and extract that to your Reaper>Plugins files. 🔳 On reaper make sure you "Enable" your nanokontrol, either on INPUt and OUTPUT in your midi devices. Then follow "Contrl/OSC" interface as it's shown in the video. Then restart Reaper. 🔳 I have noticed after that, that your hardwire should be connected before Reaper starting, in order to work properly. If you are using MAC OS, check the pinned comment as there is a specific process. I hope it will help you

Will this work for reaper on windows 11?

@Manhsterz

2 жыл бұрын

I think it should work because reaper keeps updating their software to keep up with windows. Try and tell us !

After this point 9:14 the pan knob on the hardware device automatically controls reapers pan knob as well as any learned midi knobs on VST plugins. ALSO it is really mucked up and definitely not continuous even though it is set to continuous and I wrote the data from Korg Kontrol Editor to the nanoKontrol2, etc. Also the volume slider doesn't move the reaper tracks volume up or down.

@Atezian

2 жыл бұрын

the solution to this problem is that you need to unplug the USB device. hold down the record and set buttons on the device and then plug the usb chord back in while you're holding those two buttons down. the record button will flash three times and this means it's in sonar cakewalk mode which is required for the Mackie Control Klinke in Reaper.

@Manhsterz

2 жыл бұрын

@@Atezian thanks for sharing your troubleshooting so everyone can benefit from you 😁! Wish you good music

@Atezian

2 жыл бұрын

@@Manhsterz my pleasure and thankyou for the tutorial.

@Atezian

2 жыл бұрын

@@Manhsterz Turns out that it was putting the device into SONAR mode (like in the korg kontrol editor) and resetting all the settings that were written to the device to default sonar setup. I still have no idea how you are using it with reaper in CC mode. Mine simply won't behaviour as yours does (lots of weird behaviour and unusable) and I have no idea where to go for help.

Hi, I unzipped the klinke file in the user plugin folder of Reaper, but it still isn't showing up in the control surface list. What am I doing wrong??

@Manhsterz

3 жыл бұрын

Hi Sam. Let's check it out. So in your "Programs\Reaper\Plugins\" we make sure we have 4 files among all the other .dll files : " reaper_csurf_mcu_klinke.dll" " reaper_csurf_mcu_klinke_b.dll" "reaper_csurf_mcu_klinke_b_x64.dll" "reaper_csurf_mcu_klinke_x64.dll" And the "MCU" folder with all the files inside. Then when that's checked, close Reaper and restart it. Then go to Options\Preferences\Control/OSC/web, click Add and you should have the Mackie Control (Klinke). Let me know

@marcosablone5339

3 жыл бұрын

@@Manhsterz i've got the same problem

@Manhsterz

3 жыл бұрын

@@marcosablone5339 Hum this is weird. Are you using a MACOS or a Windows PC ?

@jonathanhammer6437

2 жыл бұрын

Same problem. Did you ever figure this out?

@jonathanhammer6437

2 жыл бұрын

@@marcosablone5339 Same issue, did you ever figure this out?

I would never have guessed that using this device is so complicated. I 've spent two days watching tutorials and trying out everything, Windows 11, nothing works. Nanokontrol2 is up for sale..

I noticed you buttons didn't light up when using the first method. At least some of them light up when using the Mackie Extender control type instead of Klinke.

@Manhsterz

3 жыл бұрын

Can you make a timestamp so I can see ? I may have a clue of what you talk about, and it's with Xpand!2. I don' tknow why, but Xpand!2 auto assigns itself the buttons, so I noticed I have to "forget midi" first, then re assign again. But it might not be the thing you are talking about

@ianmartin2924

3 жыл бұрын

@@Manhsterz @5:25. It could just be the lighting. Are your transport buttons illuminating when you press play, record, etc?

How do you adjust faders other than 1-8?

@Manhsterz

3 жыл бұрын

Do you mean adjusting the knobs on top of the faders also ? Or do you mean adjusting faders other than on the korg nanoKontrol2 decide, for instance if you have another device with faders connected ? Let me know so if I can I will help you

@fuadramsey

3 жыл бұрын

@@Manhsterz how to control the faders in Reaper other than tracks 1-8. How to jump to the next bank of channels 9-16 and so on.

@fuadramsey

3 жыл бұрын

Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper.

@Manhsterz

3 жыл бұрын

@@fuadramsey Amazing info mate ! Thank you so much for sharing this trick !

@fuadramsey

3 жыл бұрын

forgot to mention a key thing here: First set the controller to the Sonar mode: unplug, press rec and set and then plug in.

can nanokontrol be used with pc

@Manhsterz

Жыл бұрын

Yes you can definitely use the nanokontrol with any digital audio workstation in PC. If you are referring to using it as a hardware with PC for another purpose, then I have never used it in a other context than with musical software

Does it control 8 tracks only?

@Manhsterz

3 жыл бұрын

Hi Caravelas Farmer, this is the troubleshooting of fuadramsey, he posted earlier and managed to use banks of faders : ******************************************************* Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ******************************************************* I hope this will help you

@caravelasfarmer7595

3 жыл бұрын

@@Manhsterz Thank you!

If everything is done according to the instructions, but Reaper does not recognize the device, try turning off the device, holding down the Set and Stop buttons on the device at the same time, without releasing the button, connect the device to the computer

@Manhsterz

11 ай бұрын

Hi there! Thanks for the tip! Hope it will help the ones who face difficulties. Cheers

Not working for me. I unzipped and put the files in the Reaper VST folder... Any ideas? I'm using PC/Win11.

@Manhsterz

2 жыл бұрын

Hi dear Ryan, 1/ There was another Reaper user that commented about the same problem, few months ago. What he found that workred was to update reaper to the latest version. Maybe you can try to update Reaper. 2/ The "Mackie" files downloaded should actually be put in the "REAPER > Plugins" folder. The REAPER files (or REAPER (x64) for some) is supposed to be located in your WINDOWS hard drive > Program Files > REAPER. Hope that helps

@ryanpeplinski1884

2 жыл бұрын

​@@Manhsterz It did! I mistook the plugins folder for the VST3 plugins folder. The Klinke options are now showing and I follow your steps but after I hit "OK" I get a MIDI error message: The following MIDI inputs could not be opened: nanoKONTROL2 The following MIDI outputs could not be opened: nanoKONTROL2

@ryanpeplinski1884

2 жыл бұрын

I'm getting little yellow blinking lights every time I adjust a pot, level, or button but nothing is moving in Reaper. :( Korg's drivers are for Win 10 but the OS spec sheet says that nanokontrol2 should work in Windows 11.

@Manhsterz

2 жыл бұрын

@@ryanpeplinski1884 okay so first step done ! You might have done it already but there is another step within reaper, which is to enable the NK2 in the midi device options (input and output). Then there is another trick within reaper, which is to give the NK2 controls. I don't remember exactly where but it is in the video, after having installed the NK2 driver I think. Isn't there any "beta" version of the NK2 driver on their website for w11 ?

For Macintosh???

@Manhsterz

Жыл бұрын

Thank you for visiting here! Unfortunately I don't have a MAC so this tutorial was made for windows. However : I pinned a comment where another user explains how to do it on MAC. Feel free to go check for it. Cheers

I man, I did everything like you and when you open xpand and try the volume slider. It just won't work with me.

@Manhsterz

3 жыл бұрын

Hey. If you mention Xpand, I guess that means that you are using the NK without Mackie plugin (if you want to control the Xpand VST). Let's assume you want to do that. First thing is to delete the Mackie plugin from OSC. Then make sure you downloaded the latest version of NK driver. On the Korg editor make sure everything is on CC mode and, send the config to the hardware (very important step). On Xpand then what I noticed is that whenever I wanted to "learn midi" I first had to "forget midi" on whatever button I want to assign. I don't know why. But maybe you can do that also. "Forget Midi" first then reassign midi to the slider/knob you want. Anyway, does your NK control anything else outside of Xpand, in you Reaper daw?

@ruitaipa

3 жыл бұрын

@@Manhsterz I said xpand because thats what you used in your vídeo, to show the knobs were working. Anyway I solved the problem connecting the NK with the two buttons that set it up for sonar, and then on command, choose Mackie Control Universal. Thanks anyway

@Manhsterz

3 жыл бұрын

@@ruitaipa That's good you solved that, so everyone else can benefit from you. Thanks !

@drinkinslim

3 жыл бұрын

@@ruitaipa THANK YOU! Mine was set to CC and just wouldn't work. I set it to Sonar and now NanoKontrol2 works in Reaper. Go figure. :)

@ruitaipa

3 жыл бұрын

@@drinkinslim glad I cld help :)

Thank you for your info. 혹시 한국인 이실까요?

@Manhsterz

2 жыл бұрын

Hey, thanks for feedback ! I do not read korean so I went to google translate haha ! So to answer your question, I am not Korean :D

Not windows 7?

@Manhsterz

2 жыл бұрын

Hey, I did not try on windows 7. However, I guess it might work also, since Reaper works on windows 7

Doesn’t work with Mac, just Windows.

@Manhsterz

3 жыл бұрын

For MAC user Check this link on reaper forum. It worked for several mac users : forum.cockos.com/showthread.php?t=207844 This Reaper forum's link will bring you to another Reaper forum's page, and in this latest, post #29, one MAC user says it works very well. Hope it will help you