Manh-Louis NGUYEN (Manhsterz)
Manh-Louis NGUYEN (Manhsterz)
Welcome to my channel!
► I will dedicate myself in this channel mainly in posting music compositions and video games music covers.
Subscribe and share videos you like.
► Need a composer for your project ? Indie games, indie movies, trailers, short animations. Contact me at [email protected]. I will be delighted to work with you !
► Feel free to support my work with tips on my PayPal :
paypal.me/ManhsterzMusics?locale.x=fr_FR
► Website
manhsterz.com
Пікірлер
Thanks for this video. It helps people a lot!
Hey Theozimbro, thank you so much for your feedback, it means a lot to me!
People who use reaper as a daw of their choice are genius
I Assume the process should be similar to use Nanokontorl with Studio one , I've been trying to connect this device with SO with no success, I'll follow the steps you mentioned here hopefully it will work as well. Thanks in advance!
Hi there. I don't use STUDIO ONE, I don't know if it is the same process but I hope it will work for you ! It is a shame that setting up the NK2 is not as easy as "plug and play". Hope you'll find your way.
Hey Manh, I recently launched a masterclass on music business, specifically on how to virtually sell music online in creative ways. It focuses on how to build direct, recurring sales as well as getting your listeners to invest in you as an artist.. It’s free because I’m a youtuber and love to educate and help artists to go full time in the music industry, and there’s also an offer at the end to learn with me on a close basis and get the entire system plus some bonuses for a couple hundred bucks. I think you’ll love the value in the free class. Would you mind if I send it over?
I used to have this CD. Thanks!
Hey you are welcome my friend !
No way... This is awesome!
Thank you so much for your feedback! I truly appreciate!
What if u have 32 tracks? Does this only do 8 tracks or you can select next page to control the other faders?
Hello Juanmiguel. There was some time ago a comment which tackle this exact issue. I have never used the NK2 for such purpose, but maybe you can try ? Here is the post : ------ Here is a troubleshooting from fuadramsey, he previously posted and managed to use "banks of faders". I think the issue you are talking about is related to the "ignore children" thing (then when you move knobs, I believe that it does not consider the intial value (the "children) and just go up and down according to your will). Hope that helps : *************************************************** Figured it out!!! Use v.08 version of Klinke's MCU plugin for Reaper It will toggle banks of tracks so you can control faders by sections: tracks 1-8, then press the track forward button on the controller to control faders on tracks 9-16 and so on. Also Folder track control (ignore children) - edit Klinke's Plugin MCU settings. You need to access Klinke's plugin menu in Reaper. The only way to get to this is with special hardware buttons on the controller that the Kontrol2 doesn't have. But you can emulate this function by using Klinke's imported actions from his plugin file download. These are custom actions for Reaper to use with his plugin. Import the actions into Reaper. Create a custom action that does both actions at once. Once imported in Reaper you will see these in the actions: 1) Mackie Control Klinke: Vpot Assign Pan/Surround (key) M2) ackie Control Klinke: Alt modifier (button) This will get you into the MCU editor, where you can assign anchor points or jumps that effect how the controller reacts to or ignores folders in Reaper. ***************************************************
beautiful
Hey Rick ! Thank you so much for passing by and for your listening !
this sounds cool! im trying to make a jungle/bamboo (action) theme for a platform fighter.
Hey thanks for coming by and for the comment! That sounds challenging but also great to tackle! Good luck!
If everything is done according to the instructions, but Reaper does not recognize the device, try turning off the device, holding down the Set and Stop buttons on the device at the same time, without releasing the button, connect the device to the computer
Hi there! Thanks for the tip! Hope it will help the ones who face difficulties. Cheers
"promosm" 😻
i haven't seen anyone use this with the MIXER exclusively. can you scroll over using the nanoKontrol to control faders #9-16???
I've unzip the klinke files onto the plugin folder, but it didn't show up on control surface on reaper. I've restarted reaper for like 5 times, i also restarted computer, i triple check the files, and the files location, it just won't show up on the reaper. What should i do?...
Hi there. It seems that for some users the file to unzip in is not the plugin folder. There is actually a little PDF in the Klinke files that you should read: they tell where to unzip the files. Hope that helps !
@@Manhsterz Yep, did that already. Options > Show reaper resource path... userPlugin. Still don't work.
❤
🍀
2:18 this is cool
Hey thank you for listening and for the comment !
Beautiful Work!
Thank you so much for your feedback !
For Macintosh???
Thank you for visiting here! Unfortunately I don't have a MAC so this tutorial was made for windows. However : I pinned a comment where another user explains how to do it on MAC. Feel free to go check for it. Cheers
really great work
Hey I truly appreciate your feedback, thanks a lot !
@@Manhsterz 😅🙏🙏
Beautiful version of this lovely tune!
Thank you for your feedback ! I really appreciate it 😊
♥️🩷♥️
Somebody's been practicing, hmm? 😏🥵
I wonder who haha ! Thanks for having a listen over here :)
Thanks for the video! I have two issues though. I coped with the first one but I don't know what to do with the other. 1) Korg driver is not working. Reaper does not see the device at all. I switched back to standard Windows MIDI driver. 2) After adding Mackie, Reaper tells me that it cannot open MIDI devices for input and output ( Any ideas what to do?
It is really annoying that reaper does not DIRECTLY recognize the device, resulting in us taking alternative complex pathways... A/ As I posted on a comment, for some people the Mackie fike has to be unzipped into another specific folder which is indicated in a PDF within one of the Mackie files. Try that maybe. B/ It is surely already the case but make sure to update reaper to the latest version. C/ In the Korg software, make sure your PC recognize the NK2 first, before going to reaper. In fact, you have to tweak settings in Korg software, export it to the NK2 and close he software before going to reaper. If the Korg software is opened in the ame time as reaper, the NK2 will be used by the Korg software, resulting in reaper not recognizing it. Hope that helps...
@@Manhsterz thanks for a suggestions! unfortunately, all three points are done, but the reaper still cannot open the device. buy the way, does it matter what mode the controller booted? also, maybe I could somehow make their custom drivers work, maybe it would work then
@@goryunovdmitry I sincerely hope that someone who encountered the same issue as you and solved it can answer you. I also have heard about the "boot mode" of th eNK2, for instance by pressing some button while connecting it. Honestly, I simply connect my NK2 without doing anything special, and on my system, is works. So I won't be of much help for that part haha 😅. Also, you might be right : maybe if you manage to make the korg driver works, Reaper may recognize the hardware. Good luck mate. And thanks for your feedback! Musically
😱 'Promo SM'
Outstanding! Great progression and composition directions!
Hey thanks for the feedback ! I always really appreciate 😄. See you around mate !
Très fort ! Continue comme ça !
Quel plaisir de te voir ici !! Merci d'être passé tendre une oreille 😄 ! Thanks buddy
Hello, dear Harry Potter! I really liked your video. I have a question. The fact is that I watched a lot of videos on this topic and saw different switching schemes of nanoKONTROL2 and Reaper. For example, "SET+REC", "SET+PLAY", "SET+REW" and even "SET+CYCLE". But you personally just plug in the cord and don't hold any buttons. I'm completely confused. Please explain how I can properly connect nanoKontrol 2 and Ripper.
All you have to do before connecting the nanoKONTROL 2 to your computer is hold down the SET MARKER button along with the main RECORD button, and then plug in your USB cable. This will load the template for Cakewalk Sonar. You’ll notice the record button blinks a few times after it’s connected, to let you know you’re in Sonar mode. Although that template is designed for Cakewalk Sonar, it works perfectly for Reaper, if you set Reaper correctly: 1. Start Reaper of course… and then go to Reaper’s PREFERENCES (CTRL-P), go into Control Surfaces (left menu, near the bottom). 2. Click ADD and Reaper will ask you what kind of Control Surface Mode…. choose “Mackie Control Universal.” 3. Then choose your MIDI input and output to be “nanoKONTROL2”. Done. Now, once you’ve exited Preferences, you’ll see that the nanoKONTROL2’s buttons respond perfectly in Reaper… all mute/solo/arm record buttons work for every track, the faders work for the track volumes, and the knobs work for the track panning. You’ll also notice the transport controls (RECORD, PLAY, STOP, REWIND, FF) all work in Reaper as well, and of course.. the SET MARKER and marker left/marker right buttons all work, too. If you have more than 8 tracks loaded (say, 16, or 24), you can use the TRACK < > buttons to navigate your track groups.
thank you for this. this saved me so much headache
Hello, dear Harry Potter. Thank you for your video. But the markers don't work for me. Are not put.
Beautiful ❤ Im so impressed!! Woow what a lot of skill
Thank you so much for listening Monica !
Impressive music - great video my friend!
The last day and this is EPIC! I am excited to see more from you.
Thank you so much for your feedback ! It is always a pleasure for me 😁
wonderful - I like it very much!
BEAUTIFUL
Thank you so much for oassingby and listen to my music ☺️ I really appreciate !
This is incredibly beautiful! I especially like the start. The vocals at 0:59 are a nice touch. I also like the the main theme restarts at 1:27, really leaves you wanting more. Keep up the good work, subscriber 201!
Dear Jade_orb, thank you so much for listening and for your really positive feedback ! I am really glad and feel joyful that you enjoy my music !
Really nice and relaxing
Anybody know why my fader is controlling pitch bend and volume??
好厉害
Thank you very much for listening and commenting !
if childhood had a concert, it would be in it!
can nanokontrol be used with pc
Yes you can definitely use the nanokontrol with any digital audio workstation in PC. If you are referring to using it as a hardware with PC for another purpose, then I have never used it in a other context than with musical software
For those people like me who could only get response from the pan controls - make sure the nanoKontrol2 is in SONAR mode. You can set this in the Korg Kontrol editor under Control/Common/Control Mode. Or it can be set by unplugging the USB cable then re-plugging while holding down SET and the Record button - the record button will flash.
Hi everyone. Some people experiences issues with PLUGINS folder. I just extracted (2 min ago, as I changed PC) all the Klinke files in [C:\Program Files\REAPER(x64)\Plugins\] and it worked well for me. However, some other user (thanks @Atezian !) pointed out, there seems to be another folder where you are supposed to extract files. I didn't see it but it is written in the PDF file included in the Klinke extractable files, in the "installation" section. For that : - Open REAPER, click on [Options>Show REAPER resource path in explorer/finder ...] - Go to [UserPlugins] - Extract all the Klinke files in the [UserPlugins] file here. For me it worked the same way as extracting it in the PLUGINS folder of Reaper. But I hope this can help !
Do you need a daw to use the nanoknotrol or can you connect it directly to a keyboard
Awesome
Thank you so much for listening and for your feedback 😁!
Hi , Thank you for this video. But, please could you tell me in which folder exactly do I have to place the Klinke folder? I use win 10 x64 / Reaper v. 6.72, and copied it to C:\Program Files\VSTPlugins, I also tried to put it in C:\Program Files\REAPER (x64)\Plugins. But Reaper cant see it.
Hey, sorry for my late answer. In case you did not manage to successfully install it : - You have to unzip all the files in "Program Files/Reaper/Plugins" directly. In folder you should find xxxxx.dll files. Just unzip into that folder. - Some users have previously reported issues taht Reaper does not recognize that plugin. OPne thin gI advise you to do is to update your reaper software. Normally you should be set, Reaper should recognize after doing that (I am also using windows 10). I really hope that helps you !
Awesome 👌!
Haha thanks a lot Hannah ! Pleasure is mine !
Wow this is amazing 😍
Thank you so much for listening and for your feedback ! It means a lot to me :)
Love you man ❤
Haha thanks foryour feedback ! It is always a great pleasure for me if that helps ! Cheers
We need Space Cadet 2/3D, a 2D platform shooter with a small protagonist like Buzz Lightyear in character, inside and against pinball machine, witch filled with heavy gears and old springs that embody a retro-futuristic perception of space. And it has platforms collapsing with grinding noises, breaking under the precision hits of giant pinballs, and gears and LED strips all over the place... Wow, I wanna, gimme
Haha it should probably be possible to make it on unreal engine 5 now
Bluffé par la qualité 👌