www.gofundme.com/f/garage-fire-rebuild

Not worse everyday. Small steps forward. Look at you. Warm. & working in your shop!! With shout outs to people who are helping you. Sounds great to me. Keep going. Cheers🤙🤙🤙

@CantKillMe

3 жыл бұрын

Yes! Thank you!

You do not need to pull the motor, remove the pto belt and the left tin shield, take the 4 bolts out of the bottom of the motor and pry the motor up as far as you can and put a short 2X4 under the front of the motor and you can see the two starter bolts and remove them . Keep turning the starter till it drops down and pull it out , reverse the procedure to install, takes about a hour. This is for a P218G motor.

@CantKillMe

9 ай бұрын

That be ok but I put this engine in this 317 so things are not as easy as you said

Congratulations as your subscribers grow again mate! 🤙🤙🤙

@CantKillMe

3 жыл бұрын

Thank you so much 😀

I thought you had to lift up motor to remove starter. I had to on mine. Big job for mr my starter mount was also broken on bottom. Had to aluminum weld it. Replaced starter.

That is not a fun job for sure.

@CantKillMe

3 жыл бұрын

yes it is