I went to work for a guy doing new construction single family plumbing,he was sending me out to do rough ins by myself with a shovel,after a few of them I went in and told him ,"my name is john,but it ain't John deere,get me a tractor or I'm walking,he bought a brand new terramite front loader backhoe,good little machine and a real back saver!

When you get into something you go ALL IN. Whether it’s chickens or Deeres. Great stuff.

Loving the JD rebuilds Stevie! Got yourself a Taj Mahal of tractors there mama

You the man. The lawnmower man. Steve and Molly at it again

Cool video Steve . Even breaking out the snap on tools 👍👍🇬🇧

Love the John deere stuff, keep it up in between the plumbing vids

like the change from the usual boiler service content,, keep the videos coming,!!!! ya got ne wanting it to be spring already so i can go work on my toys!!!,,

When the old starter spins up and sometimes growls, all it is is dry bushings in the motor itself. I kinda like the idea of TIG welding the cracked starter mount, as long as the rest of the engine checks-out. But that's me. Thank You for sharing your passion/obsession with us.

Hello from Springfield, Massachusetts !Love the John Deere content. I’m a wheel horse guy myself but enjoy your videos. Thanks for sharing.

Thoroughly enjoyed this video Steve. Good explanations.

Great video. That 430 in the background is a beauty👍Thanks for the share.

Can't wait to see inside the block with the thrown rod. Probably should pull the heads and clean the carbon soot just like cleaning inside a oil boiler... That Onan 2 cylinder opposed engine is pretty cool. Time to get a gasket set too!

Great video Steve. Love to see it progress

I love the mixed videos.

love the repairs!!!!!

Thanks for the video Steven! All the Facilities guys at the hospital wish you a Merry Christmas!

I hope that You have a Merry Christmas and a Happy New Year.

Steve I have one of the same starter switches you have. That little lamp draws enough current that it will cause those small relays to energize. Drives me crazy sometimes. Anyway as always thanks for all you do for us. Merry Christmas .!

It's a crusty one Steve! Merry Christmas 🎄

Welding the crack may be easier than replacing the rod on the old motor. Thanks for sharing Steve.

Happy Holidays Steve. Love to watch your channel from Painted Post, New York.

Love the Deere, keep ‘‘em coming!

Steve u gonna hafta be a plumber just to have all that John Deere Green. Expensive hobby!!

The bearings sounded rough on the old starter. You know what your doing.

I love the John Deere equipment videos brother!

Thanks Steve for these videos if I ever have to buy a riding mower I wont buy a John Deere

Steve, when did this become the small engine repair channel? Love the content. Keep pushing it out! Thanks, and happy holidays. Hopefully you get a cordless wrench soon. Think you might like the ryobi lithium tools.

@stevenlavimoniere

Жыл бұрын

my work truck is in the shop with major issues .. so i post what i can

It’s an illness Steve , stop the late night tractor shopping , great videos keep them coming Regards Davy 🇹🇭

The graphite impregnated bearing are not round but oval out from wear. When that happens, it’s a sure sign the rotor is not centering in the winding field. Putting grease or machine oil in there will make it worst and collect dirt. Best bet is just replace the whole starter with rebuild or new if that is possible these days.

The Performer engines are good motors. I’ve got the 20Hp on my Wheel Horse and the 24hp on my skid loader. Neither has ever needed major work. One thing to watch for on all the Onan twins is intake manifold leaks. The manifold is made in two pieces. A top and bottom that are riveted together. There is a sealant between the two halves. Over time, the sealant dries out and can develop cracks that can cause vacuum leaks. The fix is to drill out the rivets with a bit just large enough to remove the rivet. Clean the old sealant out and reseal using Moto Seal case sealant. Bolt back together using 4-40 Allen head screws and nuts with some blue lock tite. I’ve done it a couple times on a B series and a Performer. Not a big job, just takes some time….

Onan P- engines. I worked on them all the time for years on welders and generators. They have not been made for at least 20 years now. They were used on tons of equipment. Onan built their own engines and they were good. Some Parts are still available for them. I don't see them very often anymore. All new Onan generators have import made engines. Onan closed their engine building plants years ago.......They were also built as Linamar in Canada........

We used to have a Sears Riding lawn mower and I think it was 11HP. It had a Plastic Starter Gear.

nice machine hard to find quality like that anymore. If you give those front grilles a good tug they pop right out. People like that who buy those shitty zeroturds help us collectors save those antique machines from abuse some people just don't take care of things proven by how dirty that 318 was inside and none of the tins had been off. those onan engines had a flyball spacer that would go bad the earlier onans had a plastic spacer that would break where the newer onans had a metal spacer when that spacer broke it would cause the "Dreaded Onan Surge". Not sure what year that 318 is but that might be somthing you will want to check into. Other than that great video as usual Steve!

Steven just wanted to say Merry Christmas from the state of Texas. I would definitely lose track of what bolt goes where when putting it back together

Wow!!! I think you broke the record on your channel with the first video being more than an hour! 😃 Yeehaw next level next level.

I'll lend ya my truck. Molly os welcomed in it !

Now you know why it cost $800 to change the starter. Merry Christmas Steve .

@robertp7209

Жыл бұрын

It’s a bargain, these days.

My C.B. handle was Big Bird. I am over 6 feet tall and I used to wear Yellow Sweat Pants and a Jacket, so My Brother-N-Law started calling Me Big Bird.

@johnphillipsplumbing7148

Жыл бұрын

My handle was "one hung low" I'll let you figure out what my issue was 😆

I think it needs a capacitor or maybe a contactor and a little how you doin.😂

Steven it will all work out in time Rome was not built in a week

10-4 good buddy, she's a crusty one, with a rat in the cage, Good job Steve.

I was gonna say i bet that flywheel is a little chewed up probably. There might be a bat in the belfri 😆

Impact would have worked wonders

I'm having problems with my 1987 John Deere all lights come on and boom no start doesn't blow any fuse but I had to replace the ignition switch and rewire the wires connected to the ignition switch and I made sure the battery is charged and I had replaced the relay as well today and I tried to start it still nothing else and I have power every where I have been testing with the test light also is there more than a thirty watt inline fuse and the circular fuse it kinda giving me problems with more problems

It aint got no gas init (slingblade)

Steve bad bearings/bushings can hear it.

I would weld the block and re tap the thread.

Give Miss Molly a Hug for Me and watch out for those Crusty Toilets.

I don't know if Truck Drivers mess with C.B. Radios now or not. The last time I messed with a C.B. radio, The Mexican People would come in so strong, they would cover up Your signal unless You ran a lot of power to talk. The Skip would come in from Mexico. You could here a bunch of Spanish speaking people and they would dround My Signal out unless I ran a lot of power.

The Zero turn lawn mowers don't work very well on a hill.

How do you heat your garage Steve?

@stevenlavimoniere

Жыл бұрын

RADIANT FLOOR HEATING

Spray it down and make it look shiny

take the starter apart and grease the bearings.

great video but to many dam commericals

Hello Steve!

get some epoxy and fix the mounting hole on the engine.

Do still have Molly

@ccole9080

Жыл бұрын

shes the videographer/ editor,. Steves her new trainee momma 😂

bad starter relay and also a bad bendix on the startermotor

Steven, I can always count on you for some rodent shots 👍

maybe someone hit the starter while it was running.

I say weld it . not that much pressure on starter bolts. at least see how good the motor is running

Enough John Deere, already. What happened to your channel? Is this a tractor repair channel now? Liked the plumbing videos a whole lot more.

@notajp

Жыл бұрын

If you had been paying attention, you would know that his truck is in the shop with major issues, so he’s doing these videos to keep fresh content on the channel. He’s told us that before…….

@stevenlavimoniere

Жыл бұрын

MY WORK TRUCK IS IN THE SHOP WITH MAJOR ISSUES .. I POST WHAT I CAN .

@StephenPozzuoli

Жыл бұрын

@@stevenlavimoniere Sorry, I had no idea. I thought you retired or something. I've been a viewer since the very beginning and really appreciate your talent. Hope you get the truck back soon/ Merry Christmas!

you must have Retire ...

@stevenlavimoniere

Жыл бұрын

no work truck is in icu pray

@willardpinson1197

Жыл бұрын

@@stevenlavimoniere ok i pray for it

Are you still a plumber?

@stevenlavimoniere

Жыл бұрын

I WILL BE A PLUMBER TILL I DIE

@stevedubois8004

Жыл бұрын

Definitely miss your content, I’m in Maine and love watching the oil burner work

When you going back to plumbing?

@ccole9080

Жыл бұрын

@@serendipityforever1406 very commom today . hurry up and wait