Another good one man. I’m interested in the outcome of all this.

@EmbarkWithMark

3 жыл бұрын

Thank you! I hope the outcome is good.

This is great info! Thanks for putting this together.

@EmbarkWithMark

3 жыл бұрын

You are very welcome!

I swapped the NSG 370 for a NV3550 on my 2005. I chose the 3550 over the AX15 for the gear ratios. Basically the same swap. I had to dress the mounting holes on the Advanced Adapter bell housing with a file for the crank position so it would trigger properly (apeared to be just a bit to far away). I had 175k on the 6 speed but I babied it. I miss its lower 1st gear but I dont miss all its quarks or wondering if it was going to die. I went with a B&M short throw shifter which I am very happy with. I enjoy your videos!

@EmbarkWithMark

3 жыл бұрын

Very nice. You are right that is pretty much the same exact swap. So far I have not had any issues with the progress I have made thus far. If I run into any issues I will be sure to update everyone. I can also see missing the lower first gear. But honestly, I would be happy to give up that gearing for a more pleasant transmission all together. Im glad you enjoy your swap. the B&M short throw shift sounds like a very nice upgrade. Thank you, I will try to keep them coming!

Mark, wanted to mention this too. The vent on the ax 15 is on the shifter tower. I unbolted the tower and knocked out the press fit bushing. Then I tapped it and threaded in a barbed nipple, so we could run a breather hose up to the firewall. Other wise, you're gonna end up with water in it sooner or later.

@EmbarkWithMark

3 жыл бұрын

That’s not a bad idea. I have to take a look at that. Thank you!

Thanks for the videos. Recently did the same swap in an 06 LJ. Went thru Novak. They sold me the ax15 with the straight shifter tower. I had no shifter boot issues. it literally came up in the exact same spot. Anyone considering this swap in a TJ or LJ I would make sure to get the ax with the straight shift tower. Bellhousing dowels can be found at summit racing.

@EmbarkWithMark

2 жыл бұрын

I didn't there was anything other than a straight shifter tower. When I called I ordered this specifically for a swap and they sent me everything to complete the project. I did not need to mess with the bell housing dowels. So your transmission has a different style shift tower and it fits perfectly? Did your bell housing adaptor just bolt right up? Very Interested to hear how yours was to install vs mine. Thank you for sharing.

@mattphalp2182

2 жыл бұрын

@@EmbarkWithMark Yeah I noticed the hardware. Yeah Novak didn't send any hardware although they were helpful with bolt sizing thread pitch etc. The bellhousing was bolt in with accommodations for the crank sensor. My dowel pins were stuck in the old trans. Got tired of trying to beat em out. There is definitely two types of shift towers for these trans. where yours in video 3 does that s curve and comes up farther back. Mines completely straight no bend. The two boots fit over it like factory. Novak referenced their straight tower model as a "truck version" sales guy seemed to think it would fit better for my application, which it did. My first choice was Advanced but they were out of transmissions.

05-06 uses a different flywheel than the 2004 and earlier. Advance Adapters sells both bell housings to properly locate the crank position sensor.

@EmbarkWithMark

3 жыл бұрын

Exactly!

I just put a new ax15 in my buddies 89yj. He had an ax5 with internal slave. His slave went out, so we pulled the trans and replaced it... lasted 4 days. We pulled it again and bought a junkyard bell housing from a 95 with an external slave. All of that conversion was good, except the ax 5 was on its last leg. We ended up with a brand new ax15 and install parts from advance adapter. Finally back on the road after 3 months of fight with it.

@EmbarkWithMark

3 жыл бұрын

Wow that sounds awful! Glad its back on the road. How does your friend like the AX 15?

@jimmyvalhalla1939

3 жыл бұрын

@@EmbarkWithMark you'll love it.

@EmbarkWithMark

3 жыл бұрын

@@jimmyvalhalla1939 I think so too!

Hi mark I am wondering what plate did you use between the bellhousing and engine block did you use the original 6 speed plate or find one for the ax15 and also what year If you did ?

Nice looking forward to the outcome. My 2006 TJ 6 speed pops out of 1st and sounds like the input shaft barring is going out.

@EmbarkWithMark

3 жыл бұрын

I’ll do my best to capture the full install. Unfortunately it’s really common with the 6 speed. How many miles do you have on yours?

@thetouchtonsoffroad3574

3 жыл бұрын

130k

@EmbarkWithMark

3 жыл бұрын

It seems that the mileage you and I have on our transmissions are about the time people start running into a lot of issues.

what was the part number for the kit you bought. I could of swore that advance adapters had a kit that had both transmission and conversion kit in one package.

@EmbarkWithMark

3 жыл бұрын

I’ll have to look it up. I but now you have me thinking that there was too. I just remember calling Advance Adaptors and having them put the kit together on the phone.

What are your thoughts on the, 4-Spd Automatic 42RLE vs the new manual trans I have an 06 tj rubicon, and wasn't sure to go auto or manual. After reading and seeing people talk about manual trans problems I went auto. I'm picking up my jeep (just bought) on Saturday. :)))

@EmbarkWithMark

Жыл бұрын

I think you made a good choice! If your place is to offroad as well, your going to love the auto. It’s the best thing since slice bread offroad. Congratulations on the new rig!

Ok soooo Can you get these transmissions with a lower gear ratio?? Will it bolt up with the transfer case without any problems? What will the RPMs be at highway speed? What gear ratio do you have in your Diffs? Will it be bullet proof when your done?

@EmbarkWithMark

3 жыл бұрын

Marlin crawlers used to have a lower first gear for these transmissions. I’m not sure who would install it though. Yes, it will bolt up without issues. RPMs will be depended on the axle ratio and tire size. I run 4.88 gears with 33” tires. I expect the rpms at highway speed to be a few hundred lower. The AX15 will surely be stronger than the nsg370. That’s all the info I have since I am still in the process of installing it.

@allanwagner4570

3 жыл бұрын

@@EmbarkWithMark ok will wait for a no BS assessment when your done i think i like the 5 speed idea in theory

Good Work...how much does it cost you this new AX15?

@EmbarkWithMark

3 жыл бұрын

The new AX15 was from Advance Adaptors. I believe I paid $1600-$1700 for the entire kit. Transmission itself was some were around $1400.

also did you get a check engine light with the swap

@EmbarkWithMark

3 жыл бұрын

Not at all. I followed every step perfectly, no check engine lights or problems with the ECM at all.

what pilot bearing did you go with

@EmbarkWithMark

3 жыл бұрын

I went with the stock pilot bearing that came in the clutch kit for the nsg370.

what year ax15 did you use?

@EmbarkWithMark

3 жыл бұрын

I bought a brand new one from Advance Adaptors.

We’re you order the transmission for that price?

@EmbarkWithMark

Жыл бұрын

Advance adaptors.

Not not use the nv3550 over the ax15 the nv is a better tran less maintenance

@EmbarkWithMark

Жыл бұрын

How is it less maintenance? Manual transmission are very easy to maintenance to start with.

@littlebastardsracing49

Жыл бұрын

The nv3550has stronger ⚙️ case was thinker and bearings so less maintenance it's a light duty HD trans is better than the ax15 just harder to find parts only reason ppl go to them over the nv3550 J's ax dose have a less creeper 1st ⚙️ I see ur point but not as strong"

What is the correct oil viscosity for the AX15? Thanks.

@EmbarkWithMark

3 жыл бұрын

Advance Adaptors recommends Red Line MTL 75W80.

Seems to be a backward move from 6 to 5 speed. I can show you how to avoid your "crunchy shifting problem." It is easy. Just watch my video "Shift a 6 Speed Manual Like a Pro" and you'll never have this problem again, and your transmission will last the life of the car.

@EmbarkWithMark

3 жыл бұрын

You’d think. But I enjoy the 5 speed a whole lot better. And hopefully the reliability is better. The 6 speed in the TJs are plagued with reliability issues and are very expensive to repair.