JCR Unibody Frame Stiffeners - Jeep Cherokee XJ - The Roadhouse
Автокөліктер мен көлік құралдары
Today we install JCR Offroad's new Unibody Frame Stiffeners and show you guys how easy it can be.... even after a few.
Unibody isn't a limitation, it's a challenge!
Daryl's History of the XJ;
• Jeep Cherokee History,...
Join us in the Roadhouse!
Drink lotsa PBR!!
Tell us what you guys want to see us work on next........
Follow us on:
FaceBook - / pbrcherokee
Twitter - @boyspabst
Instagram - @PabstBoys
Like the Show and want to contribute..
Check out our Patreon Page:
www.patreon.co...
Royalty Free Music from:
Epidemicsound.com
purple-planet.com
incompetech.com
audionautix.com/
Пікірлер: 188
I weld all the time. I haven't burnt myself in a while, thanks to Tommy's safety tip.
"Thank JCR for giving us a stiffy" is probably one of the reasons Tommy makes me laugh so much lol
These videos are absolute classics. I come back to them time and time again whenever I need a reference video when working on my cherokee.
I laughed so hard at this one! The beer cans and safety tip killed me! Your production and editing gets better with every video. Worth the wait guys. Keep 'em coming!
@PabstBoys
8 жыл бұрын
+UndergroundTrev The Laughs are what it's all about! Glad it was worth the wait. This ain't a full time gig... We're busy dudes. But if you guys keep enjoying our episodes, we'll keep making 'em
I miss these videos. Cherokees and pbr are two of my favorite things.
Haha , love the safety Tip :) fantastic guys. 👍👍
Another premium video by The Roadhouse. Great job, keep em coming.
Won’t it rust where you grinded the metal? Maybe a weld thru primer first?
Big shout out to you guys, love your videos. I just purchased some BDS front coils springs after watching your Video on them. I'm ditching that 3.5" metal spacer. Thanks guys.
You guys simplified it perfectly
I just found this channel, LMAO the beers on that bench
Love this guys they made really good videos on XJs
That 'Talking Safety with Tommy' got me, so funny. :)
This is quite possibly one of the best videos on the internet, well done lads.
I think this channel is gonna end up being really popular. Good work guys.
@PabstBoys
7 жыл бұрын
Thanks Bud! Cheers!!
You two are just a bunch of fun to watch, keep it coming.
@PabstBoys
8 жыл бұрын
+Phillip Bishop Thanks a lot Bud! Your comments ain't so bad to read either. Cheers!!
awesome video pabst boys! keep it up, dont make us wait 2 months for a new video hahaha
@PabstBoys
8 жыл бұрын
+Ramses Valenzuela Sorry to keep y'all waiting....... Sure you guys will figure out what the pause was all about soon enough.
Weld thru primer is a good thing to spray on the parts prior to assembly to allow the areas joined together to have inner rust protection. water will get in between the rail and stiffener, you want this area painted wkth the weld tru primer.
Hilarious!! Looking forward to the next one. Cheers!
@PabstBoys
8 жыл бұрын
+Oatz Won't be keeping you waiting so long this time. Thanks!
1 video and already love this fucking channel totally earn my sub lmao.
The frame stiffener I find most effective is Kate Upton.
@PabstBoys
8 жыл бұрын
+JonDinCT BwaaaaaHahahahahahhahaha!
As always another kick ass show👍👍😉 again congrats to Tommy👍😃 makes me want to start another build for my XJ. Thanks guys
@PabstBoys
8 жыл бұрын
+Corey C What's stoppin' ya??
That was great! Good job guys on another great video!!!
@PabstBoys
8 жыл бұрын
+sloppyjoefingle Thanks Bud!!!
what took so long,you guys are a blast..keep them coming ..
@PabstBoys
8 жыл бұрын
+harold taylor Good question, And there's a good answer coming....
You guys are cooler than the other popular channels for Jeeps. Nice Video
@PabstBoys
8 жыл бұрын
+The DmaCk Thanks Pal!!! That means a lot!
@TheMrDmack
8 жыл бұрын
No ignorance or disrespect intended when i said "popular". I see you guys getting alot of subscribers this year.
@PabstBoys
8 жыл бұрын
+The DmaCk I hope that's the case. Either way, we're having fun doin' what we're doin' Thanks Bud!!
easily my favorite how to videos on youtube!@
@PabstBoys
8 жыл бұрын
Thanks Bud! Hope you check out the rest of the channel..
about time for a new episode. always makes me smile
@PabstBoys
8 жыл бұрын
+jeans 609 That's what makes it worth it! Thanks Bud!!
@jeans1889
8 жыл бұрын
like i said before, you need more videos a month.. and keep on keeping on
My fav cherokee guys !!!! Sweet video!!! Keep them coming!!!
@PabstBoys
8 жыл бұрын
+Effect2o Thanks Pal! More in the works
you guys deserve more than 7000 subscribers. keep rockin!
@PabstBoys
8 жыл бұрын
Thanks Bud! We'll get there.
You guys are awesome and keep getting better with each video. Keep it up!
@PabstBoys
8 жыл бұрын
+Sanguin Hope we didn't set the bar too high with this one.... Thanks Bud!!
You guys Rock. New Sub and how do you only have 6,000 subs. People will find you.
@PabstBoys
8 жыл бұрын
+ml2trick Well we got one more with you. Thanks Bud! Cheers!!
BAHAHAHAHAAA!! Best autobody repair channel I've ever seen! KUDOS!!!
Great channel and very funny videos!
@PabstBoys
7 жыл бұрын
Cheers Bud!!
Whoa! I could do this! Now, just need to learn welding. Also, Tommy's safety message reminded me of the warning a fellow solder gave before he shot himself in the chest with a star-cluster flare.
@PabstBoys
7 жыл бұрын
Cheeseless Crust! Safety third, hey?
Finally!!!!!! Yes! You guys are the best keep em coming
@PabstBoys
8 жыл бұрын
+NICK G That's the plan.... Sorry for the wait this time. It'll all make sense soon.
Man I really miss the road house. Even though tommy had to leave. I wish you could have be kept going. Would have loved to see the 360 go in
Be sure to Unhook the Battery whenever you are welding on a Chassis ... It will reduce the risk of frying the ecu ... Especially with newer cars or when using a Tig welder ..........
Giving us a "Stiffy". OMG I am laughing my self silly Clyde.
@PabstBoys
7 жыл бұрын
Had to......
those flap discs are amazing
How long did that take you? What welder did you use? I think the pervious owner of my 95 2D 4x4 XJ busted a few welds and I get a popping from what I think is body panels that have been a little stretched. Have ordered the stiffeners but have not much experience in welding. Have always wanted to though. That said, I’ll be getting a welder and the stiffeners and doing it my self. Any help or advice is much appreciated.
You guys should do a collaboration with bleepinjeep. You have the personality that Matt lacks and he has the larger subscriber base that you need to get your names out.
@LowGearMedia
8 жыл бұрын
+nathrak Some people build their subscriber base in non-organic ways yielding higher numbers. The Roadhouse doesn't need "Non-Organic" subscribers to make them look bigger as their content speaks for itself.
@PabstBoys
8 жыл бұрын
+nathrak Appreciate that you wanna see us get big, but we wanna work with people for the fun of it. Big or small. Believe me, We talked to the Bleepin Guy, and saw a side of his personality that makes his videos look good......
@MSpeedThree
7 жыл бұрын
Haha. Beefin' the Jeep Guy.
@brianhaw9398
3 жыл бұрын
They are probably 4000 miles apart. Kinda hard to do a collaboration
@nathrak
3 жыл бұрын
@@brianhaw9398 necro post
great video guys really enjoy your work keep up the great videos
@PabstBoys
8 жыл бұрын
+Broken Wrench Adventure Yaharrrrr fellow Redbeard! Thanks Bud! If we're ever coming through, we need to go on one of them adventures with ya bud!
For a long term Jeep build, has it caused the lower rail to rust out faster since it hold dirt and water more? Mine is rust free now, so not looking to compromise that really
Keep em coming guys!
THANKS TOMMY! I burn myself ALL THE TIME! Won't do that anymore!
Should have mentioned to spray weldable primer on the unibody and the underside of the stiffners those are going to rust like crazy
would be cool to see tou guys wheelin the jeep!
@PabstBoys
8 жыл бұрын
+doubletapm4 It's comin' Just gotta get some work done first....
question do we need to prime the surface? what about rust in between the stiffener and the frame?
Ha! Before the video starts first ad is for Miller Champagne Bottle! Yessss!!!!,... Real Beer!!!!!!!
I still dont get how u guys only have 5 k subs
@PabstBoys
8 жыл бұрын
+Mahmood al-Walled Cuz you don't share enough........LOL!
@MrMrsregor
8 жыл бұрын
this might be my favorite channel, but it is hard to get subs when there are not new videos every week..i think these guys have real jobs they have to work around unlike some some other channels that have big sponsors and only need to make youtube videos. (i am a proud PB Roadhouse subscriber)
@UseLessInLife
8 жыл бұрын
From what I know more content daily is better and over 10min videos get better ad revenue but yeah I figured they have jobs etc
@PabstBoys
8 жыл бұрын
Yeah, we have jobs. The 10 min video thing is pretty crappy though. It's a lot more work to make a shorter, more entertaining, well paced video than just upload the uncut long edit. We would like to get popular, but not at the risk of making less quality content. So, we're not gonna game the system and post crap videos on the regular. We are coming up with a few things that will help us upload more regularly. We just have to work out our budget constraints. We may even go on a fan funded model if there's enough interest. We have a lot ready to go, it's just a matter of having the time and the resources. Thanks for your input guys. We love making the show and we're glad to have you guys in our audience.
@UseLessInLife
8 жыл бұрын
I respect that.
looking good!
@jamesrockman3680
7 жыл бұрын
dude I follow both of you (admiral and PBR). Your videos rock too!
And keep cans of beer quench any fire.
You guys make great videos keep it up
@PabstBoys
8 жыл бұрын
+Grant Gibson Thanks Bud! Will do...
I’m glad to find out you don’t have to take the coils out to do the front but do you have to take the leaf springs out to do the rear or can you work around them like the coils?
I'm assuming the spacers mentioned go between the rock sliders and pinch seam ? Any recommendations on getting new holes drilled in stiffeners to match up with holes on frame where sliders mount?
@PabstBoys
8 жыл бұрын
+Rick James Bish We aren't running those sliders, but just got off the phone with Handicorn and he said, "Use the pinch weld to locate the sliders front to back since they already have the holes in them. Push the feet tight against the frame and mark and drill. That's going to get them real close."
Whatup guys?! Great channel. I like the humor. How about a roll cage install?
@PabstBoys
8 жыл бұрын
+Hilla P Hey Bud. Thanks! That might end up on our list the way things are going...
@saltymethods2637
8 жыл бұрын
+Pabst Boys Roadhouse Got another project for you that might not cost all that much. What about a LED light bar?
@PabstBoys
8 жыл бұрын
+Hilla P Got some LED stuff coming up soon
JCR gave me a stiffy hahahaha
Hey guys! Any recommendations regarding the welding process, what is the preferable welding, and on what load?
Would it benefit welding the inside also or is that too much work?
lol the beer cans....
@PabstBoys
8 жыл бұрын
+JEEP TALK SHOW! Just a couple laying around.
Got a other idea too... swapin rusty floorpanels... lol i seen some at yours...
@PabstBoys
8 жыл бұрын
+BuccYJ Hahahahahaha Yes you did...
Love your videos, but you SHOULD have shown the driver's side wheel well install. No one mentions, ANYWHERE, that you have to remove the track bar mount.
Doan buun yoself. I love this guy.
dang,...just miss watching these videos, too bad there are no new ones..
@PabstBoys
7 жыл бұрын
Yeah, There will be..........
Where do it get them for a 2000 jeep grand Cherokee Laredo?
Nice my Friends good job
What welding method did you guys use??
Where did these guys go?
well done dudes
Aaaaaaaah Stiffy I get it. Funny Boys!
@PabstBoys
8 жыл бұрын
+JeepTacular 48 That's not what Tommy meant to say..........
@jeeptacular4817
8 жыл бұрын
+Pabst Boys Roadhouse Oh, I know what Tommy meant. Got a semi just from the video
@PabstBoys
8 жыл бұрын
+JeepTacular 48 Bwaaaahahahahahahhahahahahahahaah!!!!
ay y'all uploaded again!
Damn I miss this duo.
Do you weld these all the way around or just stitch weld them on? How do these compare to other brands? I noticed a lot of other companies run clear to the front where the bumper mounts are, is that a big advantage or will these perform the same? Thanks! I really appreciate these videos
@brianwolford5084
5 жыл бұрын
If you want it to go all the way to the bumper there is another JCR kit to buy that stiffens the bumper mounts and steering box area . It mates up to that funky angle on the front of the JCR stiffener.
awesome!
I want to see you guys put a hemi in it
Who the hell are you guys, and why don't you have a million views?
@PabstBoys
8 жыл бұрын
A couple of nobodies, and dunno..
Hold on, you guys are from BC? That’s bad ass.
CAT says Meeeer . His speech is slurred after some beers.
Awesome video. I am always entertained watching you guys as well are my 4 and 6 year old. What MIG welder do you recommend? my pos Harbor Freight one is doa. Goes to show that you get what you pay for. I am debating between a Lincoln Electric 125D and an Eastwood 135.
@PabstBoys
8 жыл бұрын
Hahaha! We were aiming for "safe for work", but the kids... OK. LOL We have a Lincoln SP-170T 240v, but I use a Miller at work of the same calibre I like 'em both to be honest, but mine would work better with a new whip. Recommend something 240v. you won't be disappointed
awesome like allways... btw. how many Ampere did u you use for the welding?
@PabstBoys
8 жыл бұрын
+BuccYJ Anywhere from 90 - 150 depending on what spots we were working on. There is some thin sheet metal in spots. It's kinda hard to gauge a solid number with the little Buzz Box we have. I find wire speed to be a more important factor.
@BuccYJ
8 жыл бұрын
+Pabst Boys the wirespeed depends on the power u weld with. btw. nice cartoonpic of you guys at the beginning
@PabstBoys
8 жыл бұрын
+BuccYJ Right, but wire speed on a Buz Box like ours really just adjusts your "stick out", so when you only have "A' through "E" Amp settings, you can really fine tune it with the wire speed. Glad you like the new Logo. We've got something coming really soon about it.....
Can this be used to fix rusted out uni body’s
do the front stiffeners interfere with aftermarket bumpers or ?
The cherokee was ground-breaking, BUT it wasn't the first SUV. I think that crown belongs to the AMC eagle
@brianhaw9398
3 жыл бұрын
I would say the international scout.
What kind of amps and wire speed did you guys use?
What kind of welder did you guys use?
@PabstBoys
7 жыл бұрын
Lincoln SP-170T 220v MIG
I watch and I don't even own frame stiffeners - or a welder to put them on with! I do have an XJ though - would be weird if I didn't.
@PabstBoys
8 жыл бұрын
Wouldn't be that weird. We watch Top Gear, but don't even own a Lambo...
what fenders are those? and where can I get them?!?
@PabstBoys
7 жыл бұрын
I built them, and you can too....
Next video... hmmm Do much night wheeling? why not install some LED rock lights ;)
@PabstBoys
8 жыл бұрын
+JeepXJ8895 Like that idea!!
How many hours did this take you guys?
How long roughly did it take to do the whole job?
@PabstBoys
8 жыл бұрын
+stewie222444 If we didn't film it....... A couple of hours. Depends on your skill level and how many PBRs ya got in ya.
What welder do you guys use?
@PabstBoys
8 жыл бұрын
+Paul Duquette It's a Lincoln SP-170T 240v Old model, but does the job.
What's the url to that one video you talked about for us people how watch on our cell phones
@PabstBoys
8 жыл бұрын
+STINSONShobbies kzread.info/dash/bejne/eGGlqZmbgMfRdbA.html It's a great video!!
@STINSONShobbies
8 жыл бұрын
+Pabst Boys Thanks
Doing both sides?
Floor boards look rotted no?
Good video!! Lol
We miss Tommy...
is that a walter flap wheel? best ive ever used
@PabstBoys
8 жыл бұрын
+pondbear71 We wont use anything else. Hands down. The best!
@pondbear71
8 жыл бұрын
Absolutely. Too bad they don't help a bent t-case shaft because that's my project of the day. Yay SYE
@PabstBoys
8 жыл бұрын
+pondbear71 Haha Awesome! We're gonna have to look into doing that at some point
@pondbear71
8 жыл бұрын
My advice is to try to plan ahead. Having to do it all in a day just to get to work the next day sucked. oh and if you have a 300 pound gorilla of a friend to move it around that helps a lot. I didn't.
I'd rather grinder lol than to scrape
can u guys do a video on how to install a body lift cuz u guys are just fuckin awesome and i would love to install one on my rig but dont know how
@PabstBoys
7 жыл бұрын
Ya know, I might surprise everybody one day and actually pull that off......;D
@KentuckyFriedClassic
7 жыл бұрын
if you have an xj there is no such thing as a body lift. the frame and body on the xj are integrated together. there are no body mounts on the cherokee. the body IS the frame.
do they make these for a 95 zj?
@PabstBoys
7 жыл бұрын
I was looking at that. they don't but it would take little modification to make them fit.
@jamessteffen09
7 жыл бұрын
Pabst Boys Roadhouse im going to end up fabricating my own mount.
@PabstBoys
7 жыл бұрын
That'll work too.