No video
JCR Offroad DIY Bumper - Jeep Cherokee XJ -The Roadhouse
Today we take on the task of building the DIY Bumper from JCR Offroad (Jeep Cherokee Bumper). Join us in the Roadhouse where with the help of Handicorn we make the improbable, seem easy for people on the internet.
Laugh, cry, and poop a little if ya gotta......
Extra points if you read the description!
leave a comment about it below.
Link to where you can get this bumper:
www.jcroffroad.com/product/XJM...
Follow us on:
FaceBook - / pbrcherokee
Twitter - @boyspabst
Like the Show and want to contribute..
Check out our Patreon Page:
www.patreon.com/user?u=3727752
Royalty Free Music from:
purple-planet.com
incompetech.com
audionautix.com/
Пікірлер: 235
And...... Top notch, creative Editing. Whoever is editing your video and putting the show content together does a FAN-TESTICAL job. Seriously though... really professional and ridiculously funny. A lot of KZreadrs try and be funny. You guys actually "ARE" funny.
Just discovered you guys... F'n hilarious, informative, and helpful for making decisions on parts buys. Great energy, actually really funny, and good synergy between hosts. You guys keep up with this you'll land your own Network TV show... Or not because you're perfect for Streaming TV that let's you do you. Really F'n glad I found you two.
Yall are the perfect pair!! im Jack from Milledgeville Ga.Electrician by trade And love 1st Gen Yotas and Jeeps!! I've had 2 XJ Cherokees in the past and have an 85 Toyota 4x4 truck now as my daily shit & git ride.I plan to get a 97 to 01 XJ in January for a trail rig for me and my kids. like the channel a lot and am subscribing now.definitely will result back to this video when im ready to do my winch bumper.Easy to follow Yall with my kind of country ass instructions!!
Really dig the magnetic ground lead, totally stealing that!
@PabstBoys
8 жыл бұрын
+James Wright Just go pick one up at Harbor Freight. Theyre really cheep. Love mine!
Nice looking bumper. Great idea on the width mod. Nice work guys
@PabstBoys
8 жыл бұрын
+truedeadman Thanks! That's why this one worked out so well for us.
You guys are really good at keeping your videos succinct and to the point but somehow manage to add humor. Love the humor by the way. Great job. Keep up the good work and keep up the humor.
Bumper looks good! Careful, though, you'll get welding spatter in your beer.
@PabstBoys
8 жыл бұрын
+Darwinpasta Excellent source of iron...
Great video again!
Good to see you boys back.
Great video pace and skookum chooching guys!
@PabstBoys
7 жыл бұрын
Cheers Bud! Thanks for stopping by and commenting.
Awesome video. I'll have to check out that company, pre-cut DIY parts is a pretty neat concept. Glad to see you guys are still rolling with the show, I look forward to the next one!
@PabstBoys
8 жыл бұрын
+UndergroundTrev Stay tuned Bud!
You guys are great!
i'm sorry to say i forgot about you guys... but i was elated and happy as hell as soon as i seen this on my sub space.... you guys should make more videos i think you're awesome. and if you made more vids you got something going.. just keep on keepin on.
@PabstBoys
8 жыл бұрын
+jeans 609 It's all good bud! Glad ya like the show. we got more in the works. Just you wait......
Good video I’m building mine right now!
another great job guys. glad to see you two are still at it.!
@PabstBoys
8 жыл бұрын
+Bill Moser Still goin' strong!
Nice shirt Tommy! Thanks for the tip on the bumper kits..
Mighty fine work there!!
Man you guys made that look easy.
@PabstBoys
8 жыл бұрын
+JEEP TALK SHOW! That made us look like we got skills.......
That looks great. Price is right too!
Sweet bumper
How do you guys not have more subscribers?! :) Subbed!
yay you guys are back! love from Dubai!
@PabstBoys
8 жыл бұрын
+Mahmood al-Walled Right back at ya Pal!
You guys are so awesome.
@PabstBoys
7 жыл бұрын
No, you are.
Best video yet! The Handicorn jokes were awesome.
Good stuff..
Man you guys are the only ones I've seen with a grille like I was planning on making. Haven't seen any others like it but it looks sweet!
@PabstBoys
8 жыл бұрын
+Tim Oseland Was really easy to make too. Function over fashion! hahaha
Nice video you guys are hilarious lol glad to see one of these put together ive had a few customers ask for me to build one for em i might be making a video about this bumper to for myself to review it lol good stuff though!!!
@PabstBoys
8 жыл бұрын
Sweet! Send us a link when you post it.
haha you guys are great it reminds me of wen me n my jeep buddys do a project. its about the fun!!!! thats why I became a jeep guy years ago. great show guys. no peoject gets completed wirhout the beer!!!!!
@PabstBoys
7 жыл бұрын
Amen!!
Well, Y'all sure are fun.
Nice been looking for someone to do a video on this bumper 👍🏻
@PabstBoys
8 жыл бұрын
+jfehghfe Tommy read your mind......... That's why we did it!
chooch factor level: AVE
@pondbear71
8 жыл бұрын
yes, i cant wait for mine.
Awesome video guys! As someone who is interested in getting into welding for this exact kind of thing. A video of what you will need and how would be awesome.
@PabstBoys
8 жыл бұрын
+ctackett51 That could make a good video......
I'm so happy you guys are back! If you want idea's, then here are some! WJ knuckle + brakeswap Choosing the right winch for your rig and situation (also, nylon or steel cable? I can't wait for the next video.
@PabstBoys
8 жыл бұрын
+Dillithium Great ideas! Thanks!
great vid, i was stared ti have with draws from no new vids, thanks
@PabstBoys
8 жыл бұрын
+doug janusch Glad we could scratch that itch!
@rheidtech
8 жыл бұрын
+Pabst Boys yea me too. was gettin the restless beer syndrome sumtn fierce.
@gavinfrost3131
7 жыл бұрын
Pabst Boys Roadhouse on you passenger side did you add the 2 bolts missing that connects to the frame. Mine are gone on the passenger side but their on the driver side
Wow super corny and extremely epic! Great video guys keep emm going
@PabstBoys
7 жыл бұрын
Hahahaha That's a new one. Cheers!!!
Look so good
Where have you guys been for the last two years of my Jeep owner life!!!!!!
Great video I've been thinking about doing this for a while because bumpers are way too damn expensive. This thing turned out great and looks badass. Tell JCR i'm buying one because of this video.
@PabstBoys
6 жыл бұрын
I will.
y'all got a new subscriber lol I have a ZJ and finally getting around to mods .. not trying to pick favorites but y'all are alot more entertaining than bleepin jeep .. keep up the good work
@PabstBoys
7 жыл бұрын
Hahahahhahaha alright...
@cjw602
7 жыл бұрын
Pabst Boys Roadhouse well ZJ is toast now got in a wreck Saturday ... sooo I'm in the market for a XJ soon ... as always keep up the good work guys
Looks nice. I'm waiting to see roll cage start coming into need.
@PabstBoys
8 жыл бұрын
+stewie222444 Never know. it's a real low center of gravity build, but I guess anything could roll given what you're trying to drive over..........
that's grate guys....wish can meet again.
Im a Landcruiser guy, but subbed anyway!
@PabstBoys
8 жыл бұрын
We're anything guys. Just happen to have a Jeep. Welcome aboard Bud!
the winch setup looks good, but what about a plow hookup, say for when you want to plow some snow in your jeep?
@PabstBoys
8 жыл бұрын
Hahaha. Then the phone would never stop ringing...
welcome back :) awesome bumper ! good job.
@PabstBoys
8 жыл бұрын
+Redneck Garage Thanks Bud!! We came back to remind you that that low carb beer you'v been drinking is a load of horse s@#t.............
@RedneckGarage
8 жыл бұрын
+Pabst Boys hahaha I agree but its only temporary :)
@PabstBoys
8 жыл бұрын
+Redneck Garage Didn't Muhammad say that about Bacon? No wonder those guys are so pissed.........
@RedneckGarage
8 жыл бұрын
Not turkey bacon tho .....
@PabstBoys
8 жыл бұрын
+Redneck Garage Tisk Tisk Tisk....
Can't believe im just finding you girls now. Gonna be a long night watching these beauties
@PabstBoys
3 жыл бұрын
If you like this, you might like our new show. kzread.info We stream twice a week on Twitch www.twitch.tv/maximum__underdrive
hey i was wondering if you could do a video of you guys givung a run down in how you guys did your sliders i would really appreciate it thanks
@PabstBoys
8 жыл бұрын
+Ron Matheson sounds good. think we'll work on that.
The more videos I watch, the more I get hooked. I like Tommy's shirt. Last night I ordered AvE's t-shirt, "If it's broke, Fuck it". Two of my favorite channels come from B.C. Must be something in the water, that makes you guys entertaining. P.S., don't eat the wild mushrooms, greetings from Alberta
@PabstBoys
7 жыл бұрын
Hahahahaha Yeah, I love AVE's channel
Welp.... earned yourself a subscribe and a like! 😁🤩
Make more videos you guys are a blast
@PabstBoys
8 жыл бұрын
+harold taylor We're on it Bud! Can't keep up with the demand.
Has anyone actually pulled on these bumpers all? I'm wondering if it will hold up especially with off center pulls.
Great Videos , Do you guys have a build video of your fender flares?
@PabstBoys
8 жыл бұрын
+Justin Montoya Naw Bud. Sorry. built them before we started the KZread thing. Did a writeup on our build thread though. Check it out here: www.cherokeeforum.com/f46/pbr-inspired-xj-189166/
Skookum CHOOCHER
thumbs up if you close your eyes or look away from the weld out of habit. lol
@martinhagalen1705
7 жыл бұрын
IndianaBushcrafter do some grinding instead!
@crackedblock2264
5 жыл бұрын
Holy shit I thought I was alone 😂😂
@VictorManuel-pf7se
4 жыл бұрын
Imagine being so damn stupid that you can differentiate a video on KZread from reality
@donaldschell6668
Жыл бұрын
My one thought is one day the screen will be so good that you will have to wear a welding hood to watch videos like this lmao
Excellent! Would it work for a Disco II ?
Do they have this kit for a 1990 full-size blazer
What size hard ware do i need to buy to install
hi .. what is the thickness of sheet 3/16 or 1/4 .. thanks
Haha nice shirt. I was going to buy one, but I'm not really a skookum choocher.
What's your take on the welding, would a 110v lincoln mig be able to handle this? Looks rather thick :(
@PabstBoys
8 жыл бұрын
It'll just take more time. and more passes. Crank the heat and wire speed way low.
Did I miss the expanded metal grill? That looks pretty good and I'd like to know more about it.
@PabstBoys
8 жыл бұрын
+Tim Fox Mentioned it in our "Cherokee Project Walk Around" Episode.
I would like to see a sSangYong Musso bumper mod, which I cant seem to find anywhere
How fars this bad boy stick out in front of the grill?
10/10 video
@PabstBoys
7 жыл бұрын
Cheers!!
As always great video. I watched while I took a poop and cried little... I ate jalapino wings the day before. As for video recommendations how about a rustoleum paint job I seen some guys do really nice paint jobs with it.
@PabstBoys
8 жыл бұрын
+ATK 11 Extra Points!!!
Thumbs up 🖒
do you have a list of hardware you need to install the bumper
@PabstBoys
7 жыл бұрын
Didn't do that, no. Pretty sure it was all 3/8" bolts other than the factory hardware.
Hi, do you have de plans?
Hey guys upload the link to download the plans of the bumper....
Subscribed because AvE T-shirt!
DUDE where'd you get that Miners wrench? Im a gold miner and that there is my favorite tool hands down. and I should deffenaitly say bravo on accomplishing a magnificent channel. You guys are doing a fantastic job.
what welder was used to make this?
Hi guys very nice video! I'm Mehmet from france I a hava a jeep from 89 and i would like to install this type of front bumper but shipping fee is very expensive from usa to france. Do you have and construction drawing about necessary parts to build this bumper? Thanks again.
@PabstBoys
7 жыл бұрын
Unfortunately we don"t.
@memo89i
5 жыл бұрын
Pabst Boys Roadhouse hi Guys! I finally buy this bumper and I will probably install it this week. Just one information; what is the size of the bolting that you are using? Thanks again.
can we please see the rock slider install veido
Please, can I find DWG files for these designs? Or any drawings showing dimensions.
@PabstBoys
6 жыл бұрын
You could try to contact JCR about that, but I'm sure they'd refuse...
How thick is that Canadian steel?
hey do you need to do any grinding for this??
@PabstBoys
7 жыл бұрын
lill'bit....
damn couple of crazy are amazing I need a defense like this to do crazy four wheels..........
what winch are y'all going to run
@PabstBoys
8 жыл бұрын
+jonsjeep4x4 Not sure yet. been checking a few things out, but budget is always a pain in the ass......
I fucking cracked up so bad when he went OH yeah!!!
@PabstBoys
7 жыл бұрын
OH yeah you did!!!!
Can I Stick weld this bumper together? I already have a stick welder but i cant afford a quality MiIG welder right now. and i need a bumper
@PabstBoys
7 жыл бұрын
Sure ya can! Bit more clean up, but yeah.
@tboner_mercury
7 жыл бұрын
Awesome!!
Hey Boys, is this kit available for Fj's? thanks
@PabstBoys
7 жыл бұрын
Not from JCR anyway. There might be something out there....
you guys do the grinding
トミー、心配しないで、英語が上手いっす。バンパーはカッコいい。見ながら喉が乾いてきてパブストブルーリボンを5缶飲んじゃった。
what are the name of those red right angle magnets
@PabstBoys
7 жыл бұрын
Magnetic welding angle brackets or just magnetic squares
Nice work Which material do you use for the bumper? 4 or 5mm? Thanks
@PabstBoys
8 жыл бұрын
+Johannes David (pieflavour) It's 3/16" so that would be about 4.8mm if my math is right.....
@daquerbistwer
8 жыл бұрын
+Pabst Boys damn it looks nice 👍🏻👍🏻
lol you guys are funny
@PabstBoys
8 жыл бұрын
Haha Thanks Bud!
What kind of welder do I need for these types of bumper projects?
@PabstBoys
8 жыл бұрын
You could use whatever you got. We have a Lincoln MIG runs on 220v
@jamiehancock8574
8 жыл бұрын
Thanks!
@jamiehancock8574
8 жыл бұрын
Thanks I have a 2001 GMC Sierra z71 that I am about to do a 2 inch lift on and a cold air intake system. I've been thinking about building a bumper I may actually build one of these since they're affordable
@PabstBoys
8 жыл бұрын
Well, I don't think JCR makes a GMC bumper, but I'm sure you can find something DIY online. It's def a cheaper option.
HandiCorn, your very own on-camera smack talking internet troll. Hilarious. "BOOM! Mall Rated." Can't wait until he learns to speak 'Tommy'.
gotta find the mall rated sticker I know quite a few people with street queen jeeps that need it
@PabstBoys
7 жыл бұрын
Go to JCR's website
2:57 Is that big rusty piston taken out of a lanz farm tractor?
@PabstBoys
7 жыл бұрын
From an old machine at a logging site. Over 100 Y/o
@vaioskaliakoudas6388
7 жыл бұрын
Because those farm tractors had probably the same diameter piston w/ only one cyl
Was that Matt from BJ doing the unicorn voice? lol
I weld better with the help of blue ribbon,thanks for the tip".
What welder do you use?
@PabstBoys
8 жыл бұрын
It's a Lincoln SP-170T 240v Oldie, but a goodie
you guys going to the toy run on sunday? btw great video
@PabstBoys
8 жыл бұрын
+Alex Parkes Sorry not this time. Things just keep gettin' busier and busier for us......
what kind of welder is that
@PabstBoys
7 жыл бұрын
A Lincoln 170-T It's an oldie
subbed, came from Caron's
@PabstBoys
8 жыл бұрын
Awesome Bud! Welcome aboard!!
what welder did you use?
@PabstBoys
7 жыл бұрын
Have a Lincoln SP-170T 220v MIG. It's an oldie, but a goodie!
@chevyforlife1000
7 жыл бұрын
thanks for the info just see what welder i should get to make some bumpers and sliders for my truck
@PabstBoys
7 жыл бұрын
NP Bud! Cheers!
PBR ME ASAP!!
@PabstBoys
8 жыл бұрын
Wha-Bammm!!
How come I understand Tommy better than the Unicorn 🦄 Finger Puppet Master? WTF ?
so what exactly does Tommy do?
@PabstBoys
7 жыл бұрын
Funny faces and some ninja stuff......