Good safety talk Tommy...

@PabstBoys

8 жыл бұрын

+UndergroundTrev LOL

I’m doing my first ever mechanic work it’s on a 1997 Jeep Grand Cherokee Laredo 4x4 with the in-line 6 4.0 liter think I said that right so far I replaced the thermostat radiator hoses water pump and fan clutch have it torn down for the head gasket to be done now

Great production quality. Hey- it looks like the Crankshaft position is RIGHT THERE when you take this thing out, so it's probably a good time to swap that out if yours is old

Man, miss these guys. Great collection of XJ vids for the tube though.

You guys are crazy, every time i need a laugh I watch one of your vids. Love them, ooyeaaa, I learn alot also. Keep up the good job guys.

Hey!! Great video, great tips. Got one I'd like to share: I learned real quick to bolt the manifold down to a 1/4" piece of plate steel to avoid warping. Use your gasket as a template. You guys rock! Thanks for all your videos!!

You guys make such entertaining videos. My manifold doesn't even leak, still great to watch!

@PabstBoys

7 жыл бұрын

Cheers Bud! Hope ya stick around. More on the way...

@GOODTYNESOUTDOOR

7 жыл бұрын

spacerag definitely great videos I don't even own a jeep but love there videos

@AngelOrtiz-qu8if

5 жыл бұрын

cheep ebay.. thats a good one cuzz

I don't know where you managed to get kids saying "talking safety with tommy," but its probably the greatest thing ever.

@PabstBoys

8 жыл бұрын

+Enlisted Budget Videos Tee hehehehe

@brianadams429

2 жыл бұрын

Reminds me of fire Marshall Bill. You guys a funny. Keep it up

Another awesome show guys👍👍🙃🙂😉 thanks for all your hard work and entertaining shows👍🙃😉

@PabstBoys

8 жыл бұрын

+6.5 Creedy Thanks Bud! Makes it worth the work to get comments like this! Cheers!

This video was a first impression for me. Love guys already. Sub'd

Entertaining guys! Enjoyed watching even though I'm not facing this job anytime soon.

@PabstBoys

8 жыл бұрын

Looks like we'll be doing it again along with the head gasket job coming up....LOL Thanks for replying to my comment on your channel. Just subbed. Cheers bud!!

@JeepSolid

8 жыл бұрын

Cool, Thanks! Replied 9 months later. Took me a while to think of the right thing to say. Haha!! Sorry bout that. Was reviewing old comments and saw it. Sometimes I fall behind. I'll be watching for your next vid!

@PabstBoys

8 жыл бұрын

No worries bud, Better late than never. Our next vid will be up tonight or tomorrow morning.

@JC-wn4pp

6 жыл бұрын

Pabst Boys Roadhouse I did the same thing as the video. No my 94 xj wont start. It turns over but won’t start. Any suggestions?

always fun to watch

Excellent demonstrations

I love this channel ❤️

Sure do miss the Jeep videos

Seriously some of the best how to videos out there, you guys better be paid actors

LMFAO!!! 60 Inch Gong at the end. You guys are so funny!

@PabstBoys

8 жыл бұрын

+Samurai Sushi Hahaha Looks like we're not the biggest deal in town..

Pretty entertaining video, and I have to replace my exhaust manifold, I picked one up at a junkyard for $20, Cracked in the exact same place. You made it look easy. lol. Thanks for the video

@PabstBoys

7 жыл бұрын

Cheers Bud! Glad it helped/made you laugh.

Great videos! And thumbs up for the Forever in Blue Jeans link! :)

@PabstBoys

6 жыл бұрын

+Árni Geir Lárusson aaaaah! You saw that. Nice!! 😎🤘

You guys are amazing

Fun to watch... You guys should make a video replacing freeze plugs

I love you guys!! funny as Hell!!!

Instant sub. Thank you. Nice Gwar T

good job tommy.

You guys are great

Great video

Thanks guys!

Good job guys love watching your show. I would like to see you all make a DYI snorkel on the xj.

@PabstBoys

8 жыл бұрын

+jeremy falin We'v got a few ideas.....

Good work🛠👍🏻👍🏻👍🏻

I know this is an older video but I subbed just because of the intro haha

"Awesome!" Thanks!

good work!

@PabstBoys

8 жыл бұрын

+Admiral Off-Road Thanks Bud!

more video keep up the great video

Thank you guys for making this very helpful as I will need to replace my manifold soon.

@PabstBoys

7 жыл бұрын

Cheers! Glad to help.

@Browntownizeable

7 жыл бұрын

Do you guys have any videos or recommendations where to look for taking off a 94 jeep wrangler 2.5l exhaust my intake look a bit different than yours

ok guys on the Walker gasket and studs, did you replace those with regular bolts? You guys should do a video on replacing that front pipe to the exhaust manifold! There's no any good ones out yet! Enjoyed the vid as always!😎👊

Man, you guys are like the Beevis and Butthead of the motorized vehicle world, with less profanity, and a lot more PBR.....suuuubbedddd

Could you reach ALL the bottom bolts with the extension from the top ? or did you have go underneath to get a few ? Thanks

Really appreciate the video. Did you guys run into any issues getting the bolts out of the head? I'm afraid I'll have to cut the ones near collector flange.

Ya'll so ROCK!!!!

Man you guys are funny

Great video, I was about to shit my pants when I thought it was just about buying an expensive header, good one guys!!

APN header? Might end up doing just this. Since mine is leaking from the same points. Love how you guys just twirled the intake on top of the valve cover, saves time with disconnecting the injectors!

@PabstBoys

8 жыл бұрын

+AbsoluteAggressor And the Throttle cables. All about savin' time

Apparently PBR is the universal language

On my XJ the collector bolts are on super tight and I live in Pennsylvania so there is probably 5 inches of rust on it. Have any tips?

Did you guys flux core weld it or use gas? I’ve heard flux core was good for fixing cracks giving the weld more flexibility so it won’t crack in the same spot so to say, but idk if flux or gas would be better on exhaust. What’d you guys do or have any tips or tricks?

Jeeeejjjj a new video thanks guys always fun to wach I have seen a limited slip diff in the front axel of a volvo 740/240 something for you guys to try ? Keep up the good work 👍

@PabstBoys

8 жыл бұрын

+Thomas Van Hoven Our Buds at Enlisted Budget Videos have one on that. Check 'em out

Steve Rob sent me boys. Nice work.

@PabstBoys

8 жыл бұрын

Awesome! Steve Rob's vid about us was hilarious!!

Lifesavers!!!

Steve Rob sent me! Great stuff!

@PabstBoys

8 жыл бұрын

+Thomas EXOVCDS Cheers Bud! Stick around, the show is about to get even more boring...

Hey fellas, just bought a 2000 grand cherokee laredo. Will this header fit? Cant seem to find one for this model. Thx

How you like welding in those miller gloves? I have a pair but im skeptical

Hey guys I may have 2 do this. Fan does not come on so white smoke comes from radiator, coolant over flow tank is full and full when i open the thermostat (where i can put water if need be). but I do have faint white smoke from tail pipe. How can I test to see if It is a head gasket I need. I saw ur video on this. U guys are great!! a girl fixing alone. will try .

Any suggestions on how to get the 2 manifold bolts out of the bottom side of #4 and #5? On my 2001 XJ there are 2 catalytic converters in the way.

@bobboo9871

5 жыл бұрын

Use a stubby ratchet and a 2 in extension stand on a milk crate and you can get your arm in between the manifold and block from the front as long as the power steerimg pump has been removed I know this was an old post but incase others are reading with the same problem I posted an answer anyway

Excelente video de que año es su jeep xj?

How did you bypass your abs pump

new subscriber here, Steve Rob sent me. Enjoyed the video

@PabstBoys

8 жыл бұрын

+Ozzstar Cheers Bud! His review had us rolling on the floor.

Hello guys, is this done the same way on a WJ 2001 grand cherokee 4.0 6 cyl..?

pabst blue brought me here hahahah! everyone has the exact same crack in the exact same place usually due to engine mounts and no flex or bellows

@PabstBoys

8 жыл бұрын

+1trucavalier Yeah, It's pretty common. Cheers Bud!!

Unfortunately Tommy was fired for wasting beer.

@PabstBoys

8 жыл бұрын

+JEEP TALK SHOW! LOL

@husbandwife9800

5 жыл бұрын

Lmao

I'm going to start this tomorrow. What is the probability of breaking the bolts off in the head or block? That's the scariest part for me.

4:30 mmm ok, thanks mate, good tip

Hey brother I tackled this task all alone and with that I also changed the head gasket. Everything was done to bolt pattern and torque specs. Now when I crank it up it revs up to 5000 rpms. Any insight on what could be the issue

@lol123321123321

4 жыл бұрын

Vacuum leak on intake gasket or unplugged vacuum line somewhere most likely

sweet ratchet f841 I believe....my favorite or all time except impossible to remove socket bare handed with oil on fingers lol

@PabstBoys

8 жыл бұрын

+Mark Blake Jr. Hahahaha yeah, it holds on tight

also you guys make removing the intake easy loll

This vid is too good, the torque pattern diagram is an excellent addition. An actual DIY video people can understand and follow!

@PabstBoys

8 жыл бұрын

We do what we can. Like to ad stuff that we dont see in other DIY videos, like humor.

Just subbed. Went from Steve Robs place to here.

@PabstBoys

8 жыл бұрын

+Bruce Pender Well, Welcome to the Roadhouse! Tell Steve Rob Thanks!!

Steve sent me. Which one of you is the University English professor and who's the crab fisherman on Lake Manitoba.We got lots of crab in Lake Erie but they got to grow a little. They're only about 3 inches big. Gona back track and check you guys out, looks good. Doug -SW Ontario

@PabstBoys

8 жыл бұрын

+Douglas Laramie OMG Bud! Steve Rob had us dying with the fake back stories!!! I also grew up in SW Onterrible, and Tommy's from the Karaoke Capital of the world. BC livin' these days....

Omg I'm drunk on pbr and Rebel Yell. This is exactly what m dealing with on my XJ

Anybody who drinks Pabst is Good People.. Steve Rob does know Good People.

@PabstBoys

8 жыл бұрын

+ml2trick Steve Rob is good people.

Hey bud how close is your header to the oil pan. Installed a new header and it's sitting against the engine block. Company says they've never seen the problem. Any help would be appreciated

@PabstBoys

6 жыл бұрын

Don't know what to tell ya bud.... Shouldn't be like that.

What header do you guys recommend?

I'm surprised no kits come with a downpipe with a flex pipe. I just swapped mine recently and trying to get a flex pipe on sooner than later.

@PabstBoys

8 жыл бұрын

+downnoutdubin havent seen a kit like that, but you're right. It would beat the crappy collector doughnut. (Where it is meant to flex)

can you guys do an episode on setting pinion angle with adjustable control arms?

@PabstBoys

8 жыл бұрын

+Drooskee Skee We have something in the works for that.

Great video and really impressive production quality on all your videos. Usually XJ videos are filmed vertically with a toaster. Keep up the good work! Subscribed!

Lmao too funny new sub here

I seen you had a backlash caliber on the table, doing any axle rebuild kits? Or re gear? Great fun video guys!

@PabstBoys

8 жыл бұрын

+Jacob Jensen Just the holder. My gauge is busted. don't worry though. we will cover that.

great videos keep them up. how could you tell you needed to repair the manifold? could you here it or was there a loss of power? I have a 95 yj and there seams to be a tick I cant tell if it is a cracked manifold or a bad lifter. it goes away after fully warmed up.

@PabstBoys

7 жыл бұрын

It was really loud. just sounded like an exhaust leak

@OFFAxisBuilds

7 жыл бұрын

i think i might have something similar mine is really loud when i start it and the noise stays loud until it warms up. it almost sounds like a valve tap, but it goes away after it warms up. does this sound like a manifold issue?

@PabstBoys

7 жыл бұрын

Crane 2005 it does. I see the same thing on ford trucks, where an exhaust manifold stud will snap off and have the same symptoms. It's really common for them.

@OFFAxisBuilds

7 жыл бұрын

great thank you. i guess i will be tearing into it soon

I think fixing the existing header was a good choice.

@PabstBoys

8 жыл бұрын

+saha6818 Agreed.

You guys are facking hilarious!

Banks Exhaust headers are worth the additional coin

Got some video ideas for y'all: Cut n fold, Rust removal, Aussie or Spartan Locker, Tera low Kit, Long arms, Behind the front seat hoop, and Skids.

@PabstBoys

8 жыл бұрын

+killeninicent already done, never ending, yep, maybe, no, possible, and def getting on that one.

@TotalDissolvedSalamanders

8 жыл бұрын

Haha alright then, I look forward to the videos

im facing this job right now on my cherokee and let me say man this is a job cleaning up someone else's rig is a bitch loll

About how long did this take you minus the welding part?

@PabstBoys

8 жыл бұрын

+Samuel Veneman Did the whole job in an afternoon.

Might put some washers to space out the end of the exhaust manifold :)

@PabstBoys

7 жыл бұрын

Not sure how ya mean.......

A video idea for you guys would be a shop tour/toolbox tour

@PabstBoys

8 жыл бұрын

+richard benson That might work... Thanks Bud!

Tommy my boy my boy where are you... 😘😘.... Kindly let me know how can I buy cherokee s.parts from USA to KSA?

Jeeps are always one of the hardest/inconvenient cars to work on the simplest things are put into the hardest places to get to

@PabstBoys

7 жыл бұрын

Yarp.

@rustybrowneye

7 жыл бұрын

Oliver all chrystlers are loke that

lets see you guys build a custom snorkel. I did one on my 91xj, runs up through cowl and into a humvee style stack on passenger side, cost me about $70 in the end

@PabstBoys

8 жыл бұрын

Like that. We'll work on it.

@steventaylor7792

8 жыл бұрын

I'll send ya some pictures, you guys can let me know what ya think

@PabstBoys

8 жыл бұрын

steven taylor Sure! Post them to us on our facebook page

You guys have any suggestions on a quality header

@PabstBoys

8 жыл бұрын

We can recommend a really bad one.....

Spent that last coin on that snap on wrench

what kind of welder do you have?

@PabstBoys

8 жыл бұрын

+Joe Kirk Lincoln SP-170T MIG. 240v unit. it's an oldie, but a goodie

That was a great video and now I know Pabst Blue Ribbon is a good conductor of stupidity. And like the old Gi Joe cartoons used to say, "knowing is half the battle". Wish I could like these videos over and over but......

what would happen if you never fixed your cracked exhaust manifold?

@100ghillie

6 жыл бұрын

the cold air being sucked into those cracks is said to, over time cause warping of the head, but that's just what a few people have told me, it could be an old wives tale.

@mitchellabbott7919

6 жыл бұрын

It'll kill gas mileage and also could get into the vehicle and you'll be breathing in carbon monoxide

@DD_Dietriech

5 жыл бұрын

Pretty sure Mitchell is right about the CO. Knowing the effects of CO poisoning I know that the cracks on my manifold I am getting poisoned. Now that it's winter and I can't keep the windows down I'm gonna have to fix it...

@xmo552

4 жыл бұрын

@@mitchellabbott7919 You're correct. And, add to that list it may trigger the engine light and fail emissions testing.

How long did it take ? and why do they crack ? Thanks guys

@fredir3596

6 жыл бұрын

Tony Saprano mine did the same thing. My mechanic friend said that it’s the weight of the exhaust fatigues the manifold over time. He says that once it cracks, it’s in a better position. When the cracks are welded, it’s in a better position with less stress. Or something like that. He wasn’t allowed to weld a customer’s manifold so he’d weld the broken ones and install them for friends when theirs cracked.

@xmo552

4 жыл бұрын

Weight. Heat cycles . Exhaust taking a bump. Different engine and trans mounts. No exhaust flex. Etc

I think there's a misprint on the torque pattern display you used. I believe the spec for bolts 6 and 7 are 23 N.m (17 ft. lbs), not 23 ft. lbs. I'm by no means an expert, so I could be wrong.

@PabstBoys

8 жыл бұрын

+JonDinCT This is from a service manual, so if it's a typo, all us mechanics have been doin' it wrong for years... But to be honest, the difference between 17flbs and 23flbs on a steel head is negligible. Thanks for the comment though.

Whats the giant piston on the bench from?

@PabstBoys

8 жыл бұрын

+piecartbox A friend found it at a site where there was a mine about 100 years ago in the local area

@piecartbox

8 жыл бұрын

Its got a hell of a skirt!

@PabstBoys

8 жыл бұрын

+piecartbox For sure! It's Aluminum.

I wanna hear your back stories.

@PabstBoys

7 жыл бұрын

Hahaha That would make a good video. Or series of videos......

what wheels are those?

@PabstBoys

7 жыл бұрын

ProComp 10"wide 3 3/4" backspace

Those long wrenches snap on or gearwrench?

@PabstBoys

7 жыл бұрын

Gearwench... and love'er for it

@SpacemanFan1988

7 жыл бұрын

Pabst Boys Roadhouse I gots myself the snappy ones. Love them to death

Thats exactly what happened to me, except I waited 2mths and bought a Gibson header. So now I have 3 headers :) :(

@PabstBoys

8 жыл бұрын

+Leofred Hahahahaha Backups.