installing a bank's knock off header on my supercharged 96 Jeep grand Cherokee zj.
Жүктеу.....
Пікірлер: 35
@bombdiggitydave38813 жыл бұрын
First 👍. Good, clear, 4.0L inline 6 cylinder Jeep ZJ exhaust manifold and gasket replacement video with parts and fastener callouts, plus some mechanic tips. Excellent video. Thanks Thomas!
@thomasbeyer
3 жыл бұрын
Thank you
@leoampie4942
3 жыл бұрын
Agreed, really like the approach here. Very no frills, no bs, plus the commentary is quite relatable as I also make comments and talk to myself when i'm working on my cars lmao
@danglez70223 жыл бұрын
Im glad you found a similar header as the banks cuz i was about to spend 500 on a banks header for my zj
@thomasbeyer
3 жыл бұрын
Im sure the bank's fits better but for $300 savings I can deal with the little things.
@LawrenceOrsini3 жыл бұрын
Check out the ProMaxx head Thomas, I couldn’t be happier with it. LS valves and ported, it has plenty of meat for porting.
@thomasbeyer
3 жыл бұрын
Iv been looking at those they are definitely a good base to start with.
@davehuck28448 ай бұрын
Just put one on I am having one heck of a time getting the center bolts put back in the intake manifold with this header🤬🤬
@thomasbeyer
8 ай бұрын
It was a pain to get them started for sure
@leoampie49423 жыл бұрын
These types of headers are about as close as we can get with the ZJ to long tubes headers. If it didn't make a big difference in sound, i'm not sure they're worth the coin. I was very surprised at how small the difference between that and the OEM is. OEM seems to be designed well then.
@thomasbeyer
3 жыл бұрын
I agree it's probably not really doing much at this point. I think I will end up making my own 1-5/8 header at some point. But until I get a cam in it and get the head ported I don't think it would do anything the exhaust ports on the head are tiny
@colbymorgan78782 жыл бұрын
Nice video my dude where do you get your jeep parts from because I find quadratic is a little expensive and where did you get the little intercooler from
@dzipklubzabacsrbac8052 жыл бұрын
Does it fit to 4.0 wj
@JoeVizethum2 жыл бұрын
nice and helpful video. However I'm not sure about the fit and durability over time of the pricy banks headers compared to the cheaper ones on ebay - your thoughts ? Thanks !
@thomasbeyer
2 жыл бұрын
So far my cheap knock off header is doing well. It's only been about a year but IV abused the jeep alot and so far no problems.
@JoeVizethum
2 жыл бұрын
@@thomasbeyer do you remember the name / buying source ?
@@JoeVizethum I got mine from Morris 4x4 but it looks like it's discontinued. I can't find it anywhere else.
@JoeVizethum
2 жыл бұрын
@@thomasbeyer thanks !
@jamesward62233 жыл бұрын
Mine is running I took quick ride today
@thomasbeyer
3 жыл бұрын
With the supercharger on?
@jamesward6223
3 жыл бұрын
@@thomasbeyer not yet I had to finish the new mot6i dropped in,now I'm looking for someone to build the parts i need for the supercharger
@ochocinco20302 жыл бұрын
i have the same setup but my throttle body keeps throwing up black smoke and car wont stay started i have to keep giving it gas to start it.
@thomasbeyer
2 жыл бұрын
Compression check. Could be a lot of things. Bent valve or blown head gasket timing chain loose enough it jumped a couple teeth anything is possible.
@ochocinco2030
2 жыл бұрын
@@thomasbeyer where the 02 ports are on the new stainless steel headers can not have anything screwed into them. When I plug in the 02 sensors it restricts air and the engine can not breathe so when I leave those ports open the engine starts fine.
@thomasbeyer
2 жыл бұрын
@@ochocinco2030 sounds like your catalytic converter is clogged.
@thomasbeyer
2 жыл бұрын
@@ochocinco2030 I would make sure all the exhaust ports are open if you got an ebay header it's possible something's plugged somewhere it shouldn't be.
@ochocinco2030
2 жыл бұрын
@@thomasbeyer it’s a cat delete pipe walker 54450 and headers with dual ports for 02 sensor
@jeepxj1434 Жыл бұрын
Where did you get it
@thomasbeyer
Жыл бұрын
I got it from Morris 4x4 but it may be discontinued
@Grumpy2Nice2 жыл бұрын
Would this pass smog ?
@thomasbeyer
2 жыл бұрын
It won't throw a check engine light.
@Grumpy2Nice
2 жыл бұрын
@@thomasbeyerI live in California where emissions is horrible and want to replace the headers so I was just wondering if it would pass smog
@thomasbeyer
2 жыл бұрын
IV got no idea. Mine passed but I don't live in California. So it's just a OBD2 test
@Grumpy2Nice
2 жыл бұрын
@@thomasbeyer dang alright yeah I guess I’ll just have to figure it out or something
Пікірлер: 35
First 👍. Good, clear, 4.0L inline 6 cylinder Jeep ZJ exhaust manifold and gasket replacement video with parts and fastener callouts, plus some mechanic tips. Excellent video. Thanks Thomas!
@thomasbeyer
3 жыл бұрын
Thank you
@leoampie4942
3 жыл бұрын
Agreed, really like the approach here. Very no frills, no bs, plus the commentary is quite relatable as I also make comments and talk to myself when i'm working on my cars lmao
Im glad you found a similar header as the banks cuz i was about to spend 500 on a banks header for my zj
@thomasbeyer
3 жыл бұрын
Im sure the bank's fits better but for $300 savings I can deal with the little things.
Check out the ProMaxx head Thomas, I couldn’t be happier with it. LS valves and ported, it has plenty of meat for porting.
@thomasbeyer
3 жыл бұрын
Iv been looking at those they are definitely a good base to start with.
Just put one on I am having one heck of a time getting the center bolts put back in the intake manifold with this header🤬🤬
@thomasbeyer
8 ай бұрын
It was a pain to get them started for sure
These types of headers are about as close as we can get with the ZJ to long tubes headers. If it didn't make a big difference in sound, i'm not sure they're worth the coin. I was very surprised at how small the difference between that and the OEM is. OEM seems to be designed well then.
@thomasbeyer
3 жыл бұрын
I agree it's probably not really doing much at this point. I think I will end up making my own 1-5/8 header at some point. But until I get a cam in it and get the head ported I don't think it would do anything the exhaust ports on the head are tiny
Nice video my dude where do you get your jeep parts from because I find quadratic is a little expensive and where did you get the little intercooler from
Does it fit to 4.0 wj
nice and helpful video. However I'm not sure about the fit and durability over time of the pricy banks headers compared to the cheaper ones on ebay - your thoughts ? Thanks !
@thomasbeyer
2 жыл бұрын
So far my cheap knock off header is doing well. It's only been about a year but IV abused the jeep alot and so far no problems.
@JoeVizethum
2 жыл бұрын
@@thomasbeyer do you remember the name / buying source ?
@thomasbeyer
2 жыл бұрын
@@JoeVizethum www.4wheelparts.com/p/rt-off-road-stainless-steel-header-kit-polished-rt36001/_/R-GGMQ-RT36001
@thomasbeyer
2 жыл бұрын
@@JoeVizethum I got mine from Morris 4x4 but it looks like it's discontinued. I can't find it anywhere else.
@JoeVizethum
2 жыл бұрын
@@thomasbeyer thanks !
Mine is running I took quick ride today
@thomasbeyer
3 жыл бұрын
With the supercharger on?
@jamesward6223
3 жыл бұрын
@@thomasbeyer not yet I had to finish the new mot6i dropped in,now I'm looking for someone to build the parts i need for the supercharger
i have the same setup but my throttle body keeps throwing up black smoke and car wont stay started i have to keep giving it gas to start it.
@thomasbeyer
2 жыл бұрын
Compression check. Could be a lot of things. Bent valve or blown head gasket timing chain loose enough it jumped a couple teeth anything is possible.
@ochocinco2030
2 жыл бұрын
@@thomasbeyer where the 02 ports are on the new stainless steel headers can not have anything screwed into them. When I plug in the 02 sensors it restricts air and the engine can not breathe so when I leave those ports open the engine starts fine.
@thomasbeyer
2 жыл бұрын
@@ochocinco2030 sounds like your catalytic converter is clogged.
@thomasbeyer
2 жыл бұрын
@@ochocinco2030 I would make sure all the exhaust ports are open if you got an ebay header it's possible something's plugged somewhere it shouldn't be.
@ochocinco2030
2 жыл бұрын
@@thomasbeyer it’s a cat delete pipe walker 54450 and headers with dual ports for 02 sensor
Where did you get it
@thomasbeyer
Жыл бұрын
I got it from Morris 4x4 but it may be discontinued
Would this pass smog ?
@thomasbeyer
2 жыл бұрын
It won't throw a check engine light.
@Grumpy2Nice
2 жыл бұрын
@@thomasbeyerI live in California where emissions is horrible and want to replace the headers so I was just wondering if it would pass smog
@thomasbeyer
2 жыл бұрын
IV got no idea. Mine passed but I don't live in California. So it's just a OBD2 test
@Grumpy2Nice
2 жыл бұрын
@@thomasbeyer dang alright yeah I guess I’ll just have to figure it out or something