Installing Twist Lock Fastener with Buttons - Using Sailrite's Most Popular Tools
Тәжірибелік нұсқаулар және стиль
In this video we will install the twist lock fastener cloth to cloth with Buttons. Since Sailrite stocks many tools that can accomplish this task we thought we would touch on the most popular tools used for installation of the twist lock or common sense eyelet and stud.
To order tools and fasteners click here: www.sailrite.com
• We will show installing the eyelet with a hole cutter designed for the task or a pocket knife
• After that we will show installing holes for the twist lock stud using a hole cutter or the stayput spin cutter
• Then installing the buttons using two different of snap installation tools or the SnapRite Twist Lock Die Kit.
TOOLS FOR EYELET INSTALLATION:
Common Sense Eyelet Hole Cutter - Item # 108001
Rubber Cutting Block 10" x 10" - Item # 378100
Prong Bending Tool for Common Sense and Lift‑The‑Dot Fasteners - Item # 120445
TOOLS TO CUT HOLES FOR BUTTONS:
Hole Cutter 1/8" (4mm) - Item # 102235
Stayput Spin Cut 1/8" (4mm) Tool - Item # 104482
Premium Cutting Block 5" x 5" - Item # 103651
TOOLS TO INSTALL STUD:
Snap Fastener Installation Tool - Item # 25204
Sailrite® Snap Fastener Deluxe Installation Tool - Item # 100949
Sailrite SnapRite® Twist Lock Die Kit - Item # 104619
HELPFUL TOOLS:
Barry King Mallet Hammer Style 3# - Item # 68563
Soapstone Fabric Marking Pencil White - Item # 102766
Sailrite® Edge Hotknife Package (110 Volt) - Item # 103800
Professional Heavy Duty Rivet Tool - Item # 103520
To order tools and fasteners click here: www.sailrite.com
Пікірлер: 14
Very thorough video.
In my opinion, it would be helpful to show where this might be used, in advance, prior to the install demo. I'm a visual learner and would appreciate seeing how I might use this. Then, I'm sure I could think of other instances where these fasteners would be useful to me. I really like that the part # is shown as the part is shown. I also appreciate that you show an alternative to the tool, as we may not need to install a lot of the fasteners! Thanks, Sailrite!
wow
Nice vid
@SailriteDIY
6 жыл бұрын
Thanks!
Is there a new dies for press n snap using caps underneath? Like 6:35 setup so we don't have to take it down and instead of laying it on the table. Got grommet dies from Sailrite and ordering now for gypsy stud & etc., really great to have 1 tool for everything so waiting for turn button dies.
@SailriteDIY
3 жыл бұрын
The only die set for the Pres-N-Snap tool for twist lock fasteners is this one: www.sailrite.com/Pres-N-Snap-Turn-Lock-Die-Set Watch the video under that product for more information.
I believe I am first....
Do you need to even cut the centre hole, or can you just use the hot knife after the button is installed?
@SailriteDIY
7 күн бұрын
If you are careful you can just use the hotknife after its installed.
Do I have to install the eye in the hemmed seam? ( between the stitch) or can The eye go under it an inch?
@e.g.m6598
4 жыл бұрын
You shouldnt put an eyelet in a less backed location. Unbalanced stress at eyelet location will cause tearing. Placing in a double thick area will support the eyelet best.
@jerrysam2001
2 жыл бұрын
i guess it's pretty randomly asking but does anyone know of a good site to stream new series online ?
#3thatsme