I PAID A Guy In His BACKYARD $650 To REBUILD This Transmission... Will It Work?
Автокөліктер мен көлік құралдары
According to the internet this is the most perfect truck built in the last 20 years a 2006 GMC Sierra work truck without a single option. I bought this truck for just $1,500 and while it technically runs and drives, it needs a transmission to actually go anywhere. Now it's time to fix the 4L60e that's slowly moving towards all neutrals.
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make KZread videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#TradingCars #Sierra #GMC #OreillyPowered
Пікірлер: 152
I love how Eric has grown to be comfortable with the camera is relaxed and cracking jokes all the time.
I paid a guy 250$ to rebuild a turbo 350 on my tailgate at the Walmart parking lot. Found him on Craigslist and it worked perfect lmao this was like 2017
@weswest8666
Ай бұрын
What a deal!
My Dad owned an automatic transmission shop back in the day. When I was a kid I used to work there. We never pre filled the torque converter. The pump does that for you.
@paulcondie2520
Ай бұрын
Same, my best friends dad owned a transmission shop when I was young then my friend took over years later and I worked there off and on over the years and never prefilled a torque converter or ever seen one prefilled. Their shop had the best reputation in the Pittsburgh area
Torque converter fill with no funnel and no mess was next level sh%t!
You need to hook that man up, he has been kicking ass with you. My vote is for the work's on his radio.
Always flush out the trans cooler best you can or install an inline filter to catch the debris from the last grenaded transmission.
@limoboy27
Ай бұрын
That username 😂😂😂
I'm guessing this is the/a new camera? That footage of the torque converter prefill pour was.....RAD!!! So clear.... So perfect! "Thanks for producing JRGO! Where you can watch car parts...like/not like these....be installed. And we'll thank you....NEXT TIIIIMMMME!"
@WatchJRGo
Ай бұрын
Same old Sony ZV-1 I always use 🍻
@justinmurphy2227
Ай бұрын
@@WatchJRGo I wonder why it looked so different on my end? Can you tell any difference during the shot I'm talking about?
Hi John. Ok so here is a little story: in 2006 a local Chevy dealership had an ad where they would give you some crazy trade in amount on anything that you could drive onto the lot. That combined with a bunch of manufacturer an dealer discount should have allowed me to get a brand new 2006 work truck with a 6 cylinder and a stick-that was all I wanted, and even the short bed would have been fine, but it did not have air conditioning. That one would have been $7,750 Still a smoking deal. Almost got it, clearly click bait I guess for 18 years ago. I asked what was the next step up. It was basically what you guys are working on. V8, auto, 8 foot bed and air conditioning. I was out the door including tax for $10,200!! I had it for 2 years put about 4,000 miles on it-actually it was loaned out to friends more often than me using it! Very handy but not getting a ton of use. I think I could have power braked the right rear tire off in about 3 minutes if I wanted to! I had it over 100 more than once, and it was awesome to pass people on a highway! I doubt 0-60 was much under like 8 seconds. In the end I got tired of looking at this basically brand new truck being parked in front of my house (I had several other cars and trucks at the time too) A contractor that was doing some work for me asked if I would sell it-I think I got $15,000 for it. So basically a free truck. I would do that again if I could!! What are you saying, new basic ones are like $40,000? 4x in 18 years. Wow! Good luck with yours!
Ive got one of these trucks in a short wheel base 2wd with 360k in mileage and just for fun did a 0-60 in 7.6 seconds at a 5k elevation with the draggy. Its one of those trucks that just keeps going.
GM absolutely used different color oil pump to pickup tube depending on the motor but I am sure a Felpro becomes a catch all.
Where's the Android Stereo....might as well get Eric a Subwoofer
Impressed with the clean valve train. JR you have to give Eric a good sound system for the work truck. Hope you are feeling better.
I must say JR, out of all of the cartubers, you found the best spot in Mexico with the best looking Churches....I might have to look into that area.
@admranger
Ай бұрын
Those were some legit haciendas on that street.
It might be worthwhile to lug some transmissions up to Wichita for a $650 rebuild! I'm near Dallas. 😀
@gz3s
Ай бұрын
Its 900 in my wichita 🤣 down the rd from ya
Ive done many o pump o rings and i stick to the guides. Done several dif colors safe bet
You and Alex LSC have the fastest hands in the Midwest. It is great fun to watch the two of you together. Anything in the works? ICE cars start so reliably these days; just in time for them to go obsolete. Oh, well.
THESE are the fids I love!!! As well as the construction vids. The scrapping ones..... No closure. Becker set to see the cars move. May pay the bills but.....
That oil pickup o ring does come in different colors, which may be the only difference... I don't understand chemistry enough to guess if the dye would effect the longevity of the o ring.
Way late. We missed you this week J.R.!
Now ... a good seat is needed, probably find a decent one at a junkyard. Good work truck indeed. Thanx 4 sharing this vid.
Gotta give em a lil Kenwood in there man. Maybe swap out the speakers too. Then, might as well do a 5 channel amp….which means a couple 10” subs…😂
Watch JR Install Another ATOTO 😂
@Alegrus375
Ай бұрын
Yeah, I would think an ATOTO upgrade is coming up soon!
My dad use to do some great back yard rebuilds and they'd hold up 2. Just kind of sucks parts got so expensive over time
You or someone might find this helpful. When you're filling a transmission, put your ear to the funnel. You can still hear it sucking air, you don't have enough
When I bought my 5.3 engine gasket set it came with 2 different color o rings. I just used the same color
Glad to see ya back at work mate.😅
I see guys on FB and CL claiming they can rebuild a transmission for $600. Is that how you found this guy? The ones I see always seemed sketchy to me.
@WatchJRGo
Ай бұрын
Yup, Eric just searched marketplace, it's super hit or miss 💯
It will run even better with a nice radio
Go get a liner for the truck bed?
My 4L60E was $1800 to rebuild but, they came and got the vehicle, trailered it 85 miles to their shop, removed the trans, rebuilt it, installed it and trailered it 85 miles back to my house. I'd have never considered it if I didn't get the vehicle for free.
@_RiseAgainst
Ай бұрын
New transmissions are like $8k to fix
Not gonna lie - I think that is a GREAT truck! I'd be happy driving it and it gets to park up front (without worry of a scratch or door ding)....
Good ol 1 wheel peel right? Lol!😂
It sucks I had to work late tonight!
Yeah, when I read it the transmission in my S10 it took an entire case of fluid to fill an empty transmission. I think a couple quarts over that.
You know you're going to be installing that radio.
One tire fire? I always liked the phrase "one wheel peel" better!!
@3800scgp
Ай бұрын
Peg-Leg diff is another one I've heard 🏴☠
Eric has to have some finnish or northern scandinavian heritage =D A man of few words!
@GeFeldz
Ай бұрын
... and he proceeds to say more than he's ever said in a video, ever, at the end! Classic =) EDIT: Couple of beers in him?
I think it needs a radio 😂
A Couple hours of work on the lift means weeks on the ground!
Where did you get your transmission fixed
lol when are you going to get O'Reilly's to sponsor one of your videos? You give them so much free publicity they should throw you a bone and sponsor you
Where do you buy the BG Products?
what's the aversion to using funnels?
Eric said, put a few hours into it and it will run another 200k miles. Nope, it doesn't matter, he'll sell this one and buy another before the end of the week. LOL
I miss Kragen's, mostly because their jingle was much better.
JR common the work truck Sierra needs an Atoto head unit.
just curious, how bad was the transmission on a scale of one to ten? ten the worst? did you catch it time, do very little work after you got it back? are u good as new, for another four hundred thousand plus miles?
unfortunately the way the transmissions are tuned from the factory makes them a bit of a slouch, i used a diablo tuner and it definitely helps with shift points with a 91 tune on my 01 silverado
How is O'Reillys not a major sponsor??🤔🖖
New garage doors Easter egg at the end of the video. They look the business!!
Good Evening John Ross
@WatchJRGo
Ай бұрын
Hey Douglas! 🍻
BACK IN THE 70'S WE HAD A FRIEND WHO WORKED AT AMMCO A AUTO TRANS SHOP,WE GOT TRANS BUILT FOR 48.00 OUT DOOR,HE CHARGED NO LABOR WHICH HELPED US HIGH SCHOOL BOYS,THAT'S WHEN I FOUND OUT THERE WAS ABOUT 50 DOLLARS OF PARTS IN ONE,NOW PARTS ARE ABOUT 200 DO WHEN YOU PAY 3000 DOLLARS JUST THINK ON THAT A WHILE
Should be way faster like high 14s with traction. You should put et streets on it for curious
@WatchJRGo
Ай бұрын
Just needs a tire 💯
@TKsGarage405
Ай бұрын
@@WatchJRGo haha fair enough. I’ve run a bunch of 5.3 crew cab 4x4 at the track and even in terrible air they run high 15s at probably 1500lbs more. My extended cab 2wd was a full second faster with the factory 3:73s
Ha! That’s way more ‘normal people’ truck. Good work!
In Georgia, they called the 4l60e transmissions $700 transmissions for this exact reason. $700 bucks to fix
My transmission came out to about a 1,000 dollars. 700 to rebuild the trans and about 300 labor and fluid and r&r.
Everyone needs to know a guy... the guy that saves you some major bank.
Isn't it supposed be dexron 6 fluid?
I would've got a remaned transmission with a warranty I usually drive them till they die.
Wish i knew a cheap transmission guy. My w56b needs a new input shaft bearing and nothing else.
Crossthreading = Nature's Loctite.
Nothing all that mysterious about rebuilding an automatic. Very few special tools needed and some you can make yourself. It depends on the time it takes plus how many hard parts are shot in addition to the usual rebuild parts that get changed every time. If it was just slipping some and not totally destroyed, the cost isn't too bad. Cleanliness is important.
Over $600 and the IRS becomes proctologists, poor guy got put on blast for $51.
@WatchJRGo
Ай бұрын
We never mentioned him once lol 🙄
Rocker arms are the last week point to change .
Next episode: today we are replacing the rear end in my cheap Chevy w/t
11.5-12.5 qts to fill 4L60E
She's a ripper 😂😎
Run some liquimoly engine flush in that thing
need to fix the security light
Ordinarily, if someone besides you bought the truck, or were looking at buying it, would it be worth all this trouble to fix it up? I mean if someone were paying a mechanic to ďo the work.
Why wouldn't it work fine? It's a 4L65E! The more rebuilded transmission in the US i guess! Everyone could rebuild one ....not that hard to do. Anyway, 800usd with TC included is cheap af for sure. That right there tells you he is not using upgraded parts inside, but it's ok. They work just fine with std parts...just live longer with upgrades. Pre-filling the TC, that's not really needed. It's an old school tip, but if you fill safer doing it, just go for it. You aren't doing something wrong there...for me the worst part of pre-filling is that if you pour more than a Qt inside the TC, it might drip a little when you install it in the gearbox, and that could be misunderstood as an oil leak. So, that's why i prefer installing them just with a drop of oil. Nice camera...it looks awesome. Keep up the good work guys, peace!
So was the eclipse worth the trip and injury?
@WatchJRGo
Ай бұрын
It was, had a blast driving out there like always 🏎️
@bearing_aficionado
Ай бұрын
@WatchJRGo yeah it's something I will never forget! Luckily, I only had to travel outside! 😎
Hey
@WatchJRGo
Ай бұрын
🥇 boom!
What do you mean it needs a new flex plate ? And it’s right here outside of the car ?
@WatchJRGo
Ай бұрын
I mean we needed to bolt it on and you could clearly see it was sitting in the chair 🪑
Hope the guy runs the local transmission replacers out of business.
Woooo!
Hey, glad the transmission works, you probably won't have it long enough to see how long it lasts, though I guess it's Erics truck but he probably won't keep it long enough either. I and my buddy rebuilt the 727 I swapped into my Dart in the driveway with ramps and a floor jack. I did rent a transmission jack to put it back in.
@TrySomeFentanylToday
Ай бұрын
Transmissions are easy to rebuild, a set of good snap ring pliers and an arbor press is all you need.
@69Dartman
Ай бұрын
The 727 is pretty easy and usually can take a lot of abuse but because of the stage two shift kit and driving it like I stole it with a healthy 318 with some bolt ons I was able to break it a couple of times. Downshifting to first at 50 and manually upshifting a lot with a hard shifting kit will do that 😉😊
@mph5896
Ай бұрын
I did a 727 in an old Dodge truck 25 years ago. To this day, easiest trans I have ever rebuilt. The drum was worn on that once causing it to have no 3rd gear.
Syntec, not Motul?!?
JR..What’s the status of obtaining your private pilots license?
Why change the oil when you can just have it leak and fill up with new oil? =D
what happened to the oil sender
@WatchJRGo
Ай бұрын
They just fail all the time (the internal seal fails and oil leaks out of them) toss a new one in and keep going 🍻
Can you rebuild mine in my h3. Trans is dead😢
ditch the 60 and use a dual fed 80. The 60 will tap out again.
Where's the 96 Mustang build?
@therealboofighter
Ай бұрын
I have been wondering as well.
I'm reporting this video for violating youtube community standards. He didn't paint the valve covers. 😂
10:04 felpro is not the answer, Miata is always the answer.
@WatchJRGo
Ай бұрын
That is true 😂
@NJVernick1
Ай бұрын
Speaking of felpro, didn't you get a butt ton of felpro gaskets a few years ago? You never seem to dig into that pile though, were they all just for obscure engines or is it just the logistics of sorting gaskets not exactly being the kind of content that allows you to keep making great videos?
Kinda feels like a sleeper work truck??
It Friday Night by you guys, Saturday morning over here, anyone watched the new Fallout series yet?
@WatchJRGo
Ай бұрын
I haven’t seen any of fallout yet! 😳
@tuneskramer69
Ай бұрын
@@WatchJRGo i just saw the first two episodes, its very good
@jeffjudd3968
Ай бұрын
Just finished it...loved it!
you had a chance for a 5 minute oil pressure switch replace, and you skipped it. Do it right and you only have to do it once.
@WatchJRGo
Ай бұрын
It’s so easy to do from the top 🤷🏻♂️
@batsonelectronics
Ай бұрын
@@WatchJRGo then why wasn't it done ? I would have thought with the trans out or when the valve covers were off, great time to get to it. Also, it is 1:30am, get some sleep.
@mph5896
Ай бұрын
Its like 10 min from the top for me. I used aftermarket and blew them once a month. Did 3-4 of them before I finally went OEM.
I WANT To Rebuild Transmissions in my Bedroom!!!!!
So….did Eric quit his job to come work for you?
A 25 minute video??? You feeling ok? We didn't get an update on your shoulder or how beat up you are from the your crash. Hope you're ok man.
@WatchJRGo
Ай бұрын
I’m just working through the pain 😬
@jake_of_the_jungle9840
Ай бұрын
@@WatchJRGodrink some milk Jk
$650 had no new hard parts? Sure, labor and stuff. But did he inspect every dang component?
@jefferyepstein9210
Ай бұрын
As long as it’s shifting through all gears and not slipping it’s good enough for a flip.
12:33 WTF? A funnel? What is this, wheeler dealers?
Also... Hey
@WatchJRGo
Ай бұрын
Yo! 🍻
Eric moving back to a real truck.
So now your boyfriends work on the cars while you go for parts and play home town celebrity for the kids at the auto parts store 😂
That truck just needs a good Limited slip diff.. maybe lower gears maybe headers or a cam shaft who knows the rabbit hole goes deep….
Sucker rips
Early squad
@WatchJRGo
Ай бұрын
Yes you are 🍻