I’d like to reach out to anyone who has been inspired to spray, has purchased equipment but you’ve been scared or put off, perhaps through lack of confidence or a bad experience.. Or you’d love to spray but unsure on what equipment to invest in.. Come and see me on the SpraymanUK stand at the National P&D Show.. I want to help, motivate and advise any way I can 🙏 ..I’ll be joining my very good friends SpraymanUK who are industry leaders in spray equipment knowledge and sales. Along with a representative from Graco UK, who will be showcasing Graco’s latest innovative solutions ⚡️💙 The National Painting & Decorating show, is a 2 day event not to be missed.. 22nd and 23rd November 2022 at the Coventry Building Society Arena, Coventry.. For further details and to register for FREE tickets, search.. 👉 “P&D Show 2022” Hope to see you there 🙏 ..Let’s #PutYourSprayerToWork Regards Pete

The colour combination, the juxtaposition between matt and high gloss makes this a stand out project. Sprayed to perfection as always 😊❤

@PaintHQ

Жыл бұрын

❤️👰🏻❤️

Big up Paint HQ coming from Jamaica. I'm learning a lot here, thanks.

@PaintHQ

Жыл бұрын

Ah wow, great to hear from you brother 🇯🇲🙏 ..really appreciate you watching the videos and your kind words of support.. regards Pete

Super workmanship as always pal...

@PaintHQ

Жыл бұрын

Thank you so much 🙏

Thanks Pete. Great video, very good filming and editing etc. Look good!

@PaintHQ

Жыл бұрын

Hey Allan, you’re so kind as always 🙏 ..appreciate your feedback my friend.. regards Pete

I'm glad that now you know how to use airless paint sprayer

@PaintHQ

Жыл бұрын

Thanks for the feedback and your input my friend 💯 ..regards Pete

Hi pete what a job and what a finish that's some transformation!I like the deep colours offset by the crisp white,it must be quite tricky spraying inside the shelves and i guess that's where a good spray technique is essential so as to avoid paint build up in corners etc,the ultra max is dead handy for a feature wall isn't it?keep up the excellent work

@PaintHQ

Жыл бұрын

Ah thank you Eddie.. yeah it was a challenging one to complete.. HVLP certainly helps gain a bit more control. but the challenge is balancing fluid and air to avoid a ‘dry’ contact, getting a good coat that dries down nicely.. all good fun 😆 ..I am a fan of the handheld, spraying in small areas, especially dark features that would be very laborious with a brush / roller.. Hope you’re keeping well my friend, I really do appreciate the support you’ve shown the channel.. thank you 🙏 ..regards Pete

Excelente trabajo mi hermano 👍👏👏👏

@PaintHQ

Жыл бұрын

gracias mi hermano, eres tan amable... Saludos Pete

Hello, good work as always!) On such objects, it is important to expose already painted surfaces well, especially on those where there are three different colors, or even four...) Good luck, greetings from Ukraine)

@PaintHQ

Жыл бұрын

Thank you Roman, always a pleasure to hear from you and have your input my friend 🇺🇦💖🙏

Watched it loved it watched it again my friend legend status received 💯🔥💪🏻

@PaintHQ

Жыл бұрын

Haha that’s so cool my friend.. up the mighty Spurs 🤍 ..good away win yesterday 🙌

@MEVD2011

Жыл бұрын

@@PaintHQ big comeback but we don’t half make it hard for ourselves 😂

@PaintHQ

Жыл бұрын

🤍⚽️🤍

Nice clean lines again Pete! Amazing how much you put on with that hvlp without any sagging or runs. Wish I had that control…..

@PaintHQ

Жыл бұрын

Thank you Jonny.. you can do it too my friend.. I find with all forms of decorative spraying, to get the best finish you do have to lay on the optimal amount of product and push the boundaries without paint running.. and sometimes it does 🙈 ..primer and first topcoat I either move quicker or spray less fluid, this gives me a feel for how far I can push when spraying the all important final coat.. you’re doing great buddy, keep pushing 🎨💯 ..regards Pete

Fantastic!

@PaintHQ

Жыл бұрын

Thank you Sam!.. hope you’re keeping well my friend.. regards Pete

Great video mate, really top notch…

@PaintHQ

Жыл бұрын

Thank you kind sir 🙏 really appreciate that.. hope you’re all good buddy 👏👌👍

Super boulot 😍

@PaintHQ

Жыл бұрын

Very much appreciated, thank you 🙏

I’m looking at getting into spraying, but can justify at the moment spending thousands of pounds. It’s mainly going to be used for woodwork and wanted to know your thoughts on the Apollo Prospray 1500. Is it something you’ve used all you know much about?

What does "pre cat" mean? Is that something you put on before a catalyst?

@PaintHQ

Жыл бұрын

Hey Eric, sorry for my delayed response I will always get back to you.. pre cat means pre-catalysed, it has the chemical catalyst already in the paint, normally added at the paint shop.. so no adding and mixing like with an acid catalyst / PU ..just a real good stir before you pour into your pot 👍 hope this helps my friend, keep in touch, great to have your contribution.. regards Pete

Ca you use a traditional setup with an air compressor and Hvlp gun with a 1.8 tip to achieve the same results or do you need an airless unit?

@PaintHQ

Жыл бұрын

Thanks for your question my friend.. you would use an airless unit for spraying the thicker / higher viscosity emulsion on the walls / ceiling.. but you could use a traditional airspray HVLP for the intricate cabinetry, spraying much thinner woodwork / industrial coating 👍 ..hope this answers your question.. keep in touch.. regards Pete

Hi Pete, if you could recommend a HVLP sprayer and accessories to a painter new to spraying what would it be? We paint a lot of hall stairs and landings and woodwork over the winter and was thinking about investing in a sprayer kit after seeing your videos. Thanks!

@PaintHQ

Жыл бұрын

Hi Kevin, great to hear from.. you won’t look back when investing in spraying.. regarding HVLP, you have 2 routes to investigate in terms of how air is ‘delivered’,.. a compressor (Air Spray) and Turbine.. now there’s advantages to both, whilst essentially the atomising technology and results will be the same.. both using air, with a turbine using stages of ‘concentrating’ the air to a ‘HVLP limit’ and a compressor using a conventional method of a tank and compressing the air, with a theoretical ‘no limit’.. Turbine technology will typically be more expensive for a quality unit such as the Graco‘s, I say quality because cheaper units can overheat and cut out or you won’t get the same number of stages to generate the air.. a Turbine unit is lighter and more manoeuvrable (which could well suit you in stairwells), but the airline is thicker and more weighty.. whereas the compressor is heavier to lift out the van and carry up stairs (if required).. but like I do, I often setup in another room or even outside and run the much thinner and flexible airline to the pressure pot.. on that note, I prefer the advantages of a regulated pressure pot, which is more easily achieved with a compressor Vs the passive setup you can achieve with a standard turbine.. unless you was to purchase a Graco Procomp 9.5 which is excellent technology with its onboard compressor that’s dedicated to purely pressurising a remote pot.. Now if I was going down the turbine route, that’s what I’d choose 😆.. a bit more of an investment, but worth the extra.. lastly, with a (suitable) compressor you have the future ability to convert an existing airless unit to AAA - Air Assisted Airless.. the ultimate in a hybrid between airless and airspray technology, which greatly improves transfer efficiency and control 👍 Or just a straight airless unit could meet your needs and more, such as the GXFF, or for the ultimate manoeuvrability, navigating stairs.. the GXFF Cordless ..Hope this helps a little, sorry for the essay.. I can appreciate the dilemma you must have.. my friend Mike at SpraymanUK will be more than happy to assist further with no pressure to purchase, his knowledge is very inspiring 😆 ..and of course I’m more than happy to help any way I can.. in fact I’m with SpraymanUK at this years National P&D show (this month.. November), if you can make it, it’ll be a nice to meet up for a chat 🙏 regards Pete

@kevinpower4973

Жыл бұрын

@@PaintHQ that’s brilliant information thanks for the detailed reply Pete, really appreciate it. I’ll give them a call at some point this month then.

@PaintHQ

Жыл бұрын

You’re very welcome, anytime 🙏 regards Pete

@orozco53204

Жыл бұрын

@@PaintHQ thanks for that reply that helped me also,do u have a video where u connect air compressor to pot?

@PaintHQ

Жыл бұрын

You’re very welcome Carlos.. if I recall this video covers pressure pot setup.. How To Setup A Pressure Pot | HVLP Gun Cleaning kzread.info/dash/bejne/lZmV0bp8dNS2ibQ.html Regards Pete

is there a reason why you thin the wall and ceiling paint? maybe so it sprays even?

@PaintHQ

Жыл бұрын

Hello my friend.. I typically don’t look to thin a material when airless spraying.. however this emulsion I’m spraying is very thick in viscosity, and I know from looking at the data sheet that it was possible to thin 10%.. it really is worth easing it that amount to ease the flow, allow for a lower pressure and gain more control.. lower pressure you get less bounce back of paint off the walls / ceiling, so cleaner spraying and less overspray 👍 ..thanks for your question, keep in touch my friend.. happy to help and advise if I can.. regards Pete

What made you use pre-cat?

@PaintHQ

Жыл бұрын

Hello my friend.. that’s a very good question.. waterborne technology has come on so much and I for one prefer / and do spray WB 99% of the time.. but this project meant I could push the boundaries and spray PC and strive for a 90% high gloss finish.. I was up for the challenge and liked the quick drying times also 😆 ..but yeah, I do typically spray waterborne, and soon I’m hoping to showcase some ‘cutting edge’ WB paint technology that’s crosslinked and potentially equal to solvent in sheen and durability 👌.. keep in touch, great to have you contributing ion the PaintHQ channel.. regards Pete

How come this person isn’t using a drop cloth to protect floor from paint while mixing and pouring?

@PaintHQ

Жыл бұрын

Hey Tony.. let me reassure you my friend, the floor is very well protected.. the floor is covered in a fleece, with a plastic backing.. it’s known as Fleece Floor Protection Roll.. Comes in 25m x 1n rolls, a cost effective solution Vx X-Board for example, it can be used over and over and maintains its quality.. www.amazon.co.uk/DUST-Sheet-ABSORBANT-Floor-Fleece/dp/B06XJ7PYD4/ref=mp_s_a_1_1_sspa?crid=2BR2W72U2IZB1&keywords=fleece+floor+protector+roll&qid=1667379169&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=fleece+floo%2Caps%2C197&sr=8-1-spons&psc=1&smid=A1E6RJ0IJBW7HJ ..Thanks for watching the videos and supporting PaintHQ 🙏 ..All the very best my friend.. regards Pete