Husqvarna Automower Collision & Lift Errors Completely Explained For 430X, 430XH, 450X, & 450XH

Фильм және анимация

In this video we cover nearly everything there is to know about the collision and lift sensing systems on Husqvarna Automower models 430X, 430XH, 450X, 450XH, 520, 520H, 550, 550H, 550 EPOS, & 550H EPOS. Many people think that collision or lift errors are isolated only to the front or rear joysticks on these models of ‪@HusqvarnaUSA‬ Automowers. In reality though there are several other components that are involved in both the collision detection and lift detection systems on these Automower models. In this video we start with a Husqvarna 450XH Automower that has a collision active error message on it. We start by going through the simple process of checking to make sure that the body is properly mounted to the joysticks, checking the snaplock caps to make sure they are still in good condition and the center is not poked out, checking the condition of the joysticks to make sure nothing is bent or twisted, and making sure the magnet is still in the magnet holder in the nose of the mower under the charging plates. From here we move on to checking the sensor information in the Automower's quick info menu (Not available on 500 series) to determine which sensor is showing that it is active and checking which sensors are working properly. Then it's on to the inside of the mower to further examine the joysticks, sensor circuit boards, and wiring to determine what is causing the mower to give the error message.
Looking for parts used in this video?
Snaplock Caps:
www.roboticmowerservices.com/...
Lift Sensor (complete):
www.roboticmowerservices.com/...
Rear Joystick:
www.roboticmowerservices.com/...
Collision Sensor Board:
www.roboticmowerservices.com/...
Magnet Holder (XH & H Models):
www.roboticmowerservices.com/...
Magnet Holder (X Models)
www.roboticmowerservices.com/...
If you are looking to purchase an Automower, looking for Automower parts & accessories, or in need of tech support, please visit www.roboticmowerservices.com or send us an email at RoboticMowerServices@gmail.com
#Automower #roboticmowerservices #husqvarna #LiftError #CollisionError
Collision Active, Collision Error, Lifted Error, Sensor Diagnosis, Automower Repair
This video is brought to you by Robotic Mower Services, LLC. Not only are we an authorized Husqvarna Automower dealer, but we are one of the top Husqvarna Automower dealers in North America for Automower sales, Automower parts, Automower service, and Automower technical support. Our dedication to providing service, parts, and troubleshooting information to the Automower community lead to @Husqvarna naming us the very first winner of their AAP Award of Excellence! This effort we put into supporting the Automower product and Automower customers combined with our hands on real world experience is what separates us from other Automower dealers.
Did you know that Automowers, or "Husqvarna robot mowers" as some people call them, have actually been in use since the mid 90's? See the evolution of models and features of Automowers from the worldwide leader in robotic lawn mowers here: www.roboticmowerservices.com/...
Thank you for watching!

Пікірлер: 24

  • @davejblair
    @davejblair3 ай бұрын

    This is a first class video with clear explanation of steps and a methodical, logical approach to problem diagnosis. Thank you for sharing your expertise. Hopefully this will help me repair a 10 year old mower that has been cutting my grass relentlessly despite the collisions, weather, drowning, and being thoroughly trampled by an escaped bull (no joke). If it doesn't help, the video was still well worth watching.

  • @SeanBallington-hw8cj
    @SeanBallington-hw8cjАй бұрын

    FYI - Thanks for the video as always! After doing the testing, the 450xh was still reflecting a tilt error ever 60 secs or less. Eventually, I found that the washer below the stud was missing when the stud was replaced. This small difference caused the automower to continually think it was being lifted. Amazing!

  • @zabkowice1
    @zabkowice12 ай бұрын

    Great info thanks. Best instruction video on the web.

  • @RoboticMowerServices

    @RoboticMowerServices

    2 ай бұрын

    THANK YOU!!!

  • @eibenburg9529
    @eibenburg9529 Жыл бұрын

    Very helpful. I have a recurring lift issue for the last 10 days or so. Now I know what to check out. Many thanks, keep up the great work.

  • @RoboticMowerServices

    @RoboticMowerServices

    Жыл бұрын

    Thanks for the feedback! If you need more info just send us an email. We have another video with this type of info for the 300 series Automowers that we hope to have out soon.

  • @a.kievstar0256
    @a.kievstar02562 ай бұрын

    Thank you for this great video, it was very helpful !

  • @RoboticMowerServices

    @RoboticMowerServices

    2 ай бұрын

    Glad we could help

  • @tjb3038
    @tjb3038 Жыл бұрын

    Great description! Easy fix once I realized what was causing the lift error. Thanks.

  • @RoboticMowerServices

    @RoboticMowerServices

    Жыл бұрын

    Glad to hear!

  • @artorokkonen4707
    @artorokkonen470711 ай бұрын

    Thanks for a very helpful video. i just started as a service technician with mostly husqvarna robotmowers in Sweden.

  • @martindonaldsson1297
    @martindonaldsson129711 ай бұрын

    Thank you for the excellent video! This helped me resolve the issue I had with my very similar Gardena robotic mower. Much appreciated!

  • @CoulterBlackburn
    @CoulterBlackburn3 ай бұрын

    Thank you for taking the time to make such helpful videos, really appreciated 🙂

  • @bigredtiki
    @bigredtiki2 ай бұрын

    Thank you saved me a service call!

  • @RoboticMowerServices

    @RoboticMowerServices

    2 ай бұрын

    Awesome! Glade we could help!

  • @pamnosch
    @pamnosch Жыл бұрын

    Thank you so much ! very useful ! I have a 330x very similar to this.

  • @RoboticMowerServices

    @RoboticMowerServices

    Жыл бұрын

    Thank you for watching and commenting in! Yes, the 330X is basically the early version of a 400 series mower. That is one of the models that was never available here in America.

  • @julienser
    @julienser Жыл бұрын

    Thanks great video

  • @securityfamily
    @securityfamily11 ай бұрын

    Is there a way to jumper a bad lift sensor board and trick the mower to a NO lift until I can order in a new printed circuit board?

  • @A2an
    @A2an Жыл бұрын

    it gos for 320 & 420 as well Thanks 👍

  • @cccjoe8131
    @cccjoe8131 Жыл бұрын

    Hi there. Great help thamks. How can we update the sotfware?

  • @antonicisek8823
    @antonicisek882317 күн бұрын

    Hi my auto mover leaves the station and stopped after 2metres with mover stuck in a charging station, so far my service guy changed charging station board but fault still there, now he said maybe motherboard is faulty, any ideas what can cause this problem, kind regards

  • @mrlundee
    @mrlundee8 ай бұрын

    Where did you buy the harnes/wires for the rear collision sensor? 😁

  • @KMEthridge
    @KMEthridge Жыл бұрын

    When I switched the ribbon cable around, the rear collision went away, but I didn’t get a front collision. I was going to order a replacement just to be safe, but I don’t see it on you website? 430x btw

Келесі