Progress on the conversion using a WPL B36 KM Chassis
Жүктеу.....
Пікірлер: 41
@gazfpv2 жыл бұрын
Nice one Steve. 👍 Brilliant modification ur doing. 👍
@Pezzapoo
2 жыл бұрын
Thx Gaz, awaiting parts for the final push
@gazfpv
2 жыл бұрын
@@Pezzapoo can't wait for the finished project. 👍 😊
@herbieRCpaints532 жыл бұрын
Nice work so far mate. Coming along nicely 👍👍
@Pezzapoo
2 жыл бұрын
Awaiting some parts now matey thx
@RCmadness8882 жыл бұрын
The huina is a ok truck, for starters, or ....most of us, "bugeteers" I have my eyes on a add with a set of huina equipment, excavator, front loader and this truck, all of these are full metal version for 300 pounds converted from my curremcy. All is good, minus this truck . As ive seen, it has loads of mobility issues....and this solution seems the best so far and detailed ! Looking forward to see the finished truck and the solutions that you use. Thank you!
@Pezzapoo
2 жыл бұрын
I agree mate, the only issue I see with using the all metal one like this could be the weight even with this modded chassis. I kind of think the cheap plastic one would be a better donor or at least using the plastic rear tipper bed. Will have to see, my main issue now is the gap between the bed and the cab due to how I have the tipper actuator from the base kit. I was thinking the crane arm would look good there maybe. Its kind of taken a back seat since I got hold of the A60H Volvo which is far superior in every way, but I still need to get it done since I'm so far in now.
@jock_thedefender
Жыл бұрын
@@Pezzapoo any update on the part 3?
@ShadeTree_RC
Жыл бұрын
@@jock_thedefender i too come back looking for updates on this rig lol
@cat-cambodia1801 Жыл бұрын
Good video Repair 👍🤗
@Pezzapoo
Жыл бұрын
thx )
@kurdish_rc Жыл бұрын
Great work👍👍👍👍👍
@Pezzapoo
Жыл бұрын
Thx
@pbeccas2 жыл бұрын
It needs Tonka written on the side Steve. That will make it work properly.
@Pezzapoo
2 жыл бұрын
Not sure about work but certainly last mate )
@septa8146 ай бұрын
Mantap 👍👍👍
@rccrawlersmid-wales6452 жыл бұрын
It's looking great already. Adding extra/stiffer leafs in the back could help?
@Pezzapoo
2 жыл бұрын
I agree mate, going to double up on springs
@ShadeTree_RC Жыл бұрын
id like to do a similar 1 but leave the wpl cab and paint the huina bed olive green ....thanks for the inspiration 😎
@Pezzapoo
Жыл бұрын
sounds like a plan mate, go for the plastic bed rather than this heavy thing
@volvtech7773 Жыл бұрын
I'd imagine you have the truck done. But I have a Double E Arocs and it's that same truck as the huina just uses a linear actuator for the tipper. Order a linear actuator to tip the box.
@Pezzapoo
Жыл бұрын
Its still in a corner mate, I think you are right, will just have to get an actuator although it tips now tbf, just needs a fake palfinger adding. Ah who knows?? lol will see, thanks for the tip mate
@Dieselguy-qe2lw3 ай бұрын
How did you get the dump motor to fit in chassis?? Wanting to do this to my model
@Pezzapoo
3 ай бұрын
I couldn't fit it and I abandoned the project as it was not going to be worth it.
@abdulhafiz32182 жыл бұрын
What type tyre u use?
@Pezzapoo
2 жыл бұрын
They are WPL soft KIt Metal tyres
@gods_only_child9953 Жыл бұрын
Any update on the end result?
@Pezzapoo
Жыл бұрын
Currently waiting on funds to get more parts mate, other projects have taken priority but.will get back on it soon
@grrfy2 жыл бұрын
Does the lift mech have to stay electric?
@Pezzapoo
2 жыл бұрын
Yes mate, no room or money for hydraulics. Sorted it now tbf that’s why there’s a gap, moved the wheels back to fit the servo
@grrfy
2 жыл бұрын
@@Pezzapoo i was thinking just a double thin syringe into single sriynge setup would fit inside the space if ran them horizontalinside chassis rails even driven by one of those screw servos likethe ones on upgrade excavator arm is surprising the force can exert with the double to single setup, and nice and compact
@grrfy
2 жыл бұрын
i did build an excavator with full arm and bucket operation from wood and same setup,was decent,o level A lol
@Pezzapoo
2 жыл бұрын
@@grrfy bonkers lol
@Pezzapoo
2 жыл бұрын
@@grrfy not something I m familiar with mate but a good call. I really wanted to not waste the current setup seeing as it works on the controller ok.
@josefkuruc2340 Жыл бұрын
Hello. Nice. Where I can buy sond diesel simulátor please? Thanks for reply
Пікірлер: 41
Nice one Steve. 👍 Brilliant modification ur doing. 👍
@Pezzapoo
2 жыл бұрын
Thx Gaz, awaiting parts for the final push
@gazfpv
2 жыл бұрын
@@Pezzapoo can't wait for the finished project. 👍 😊
Nice work so far mate. Coming along nicely 👍👍
@Pezzapoo
2 жыл бұрын
Awaiting some parts now matey thx
The huina is a ok truck, for starters, or ....most of us, "bugeteers" I have my eyes on a add with a set of huina equipment, excavator, front loader and this truck, all of these are full metal version for 300 pounds converted from my curremcy. All is good, minus this truck . As ive seen, it has loads of mobility issues....and this solution seems the best so far and detailed ! Looking forward to see the finished truck and the solutions that you use. Thank you!
@Pezzapoo
2 жыл бұрын
I agree mate, the only issue I see with using the all metal one like this could be the weight even with this modded chassis. I kind of think the cheap plastic one would be a better donor or at least using the plastic rear tipper bed. Will have to see, my main issue now is the gap between the bed and the cab due to how I have the tipper actuator from the base kit. I was thinking the crane arm would look good there maybe. Its kind of taken a back seat since I got hold of the A60H Volvo which is far superior in every way, but I still need to get it done since I'm so far in now.
@jock_thedefender
Жыл бұрын
@@Pezzapoo any update on the part 3?
@ShadeTree_RC
Жыл бұрын
@@jock_thedefender i too come back looking for updates on this rig lol
Good video Repair 👍🤗
@Pezzapoo
Жыл бұрын
thx )
Great work👍👍👍👍👍
@Pezzapoo
Жыл бұрын
Thx
It needs Tonka written on the side Steve. That will make it work properly.
@Pezzapoo
2 жыл бұрын
Not sure about work but certainly last mate )
Mantap 👍👍👍
It's looking great already. Adding extra/stiffer leafs in the back could help?
@Pezzapoo
2 жыл бұрын
I agree mate, going to double up on springs
id like to do a similar 1 but leave the wpl cab and paint the huina bed olive green ....thanks for the inspiration 😎
@Pezzapoo
Жыл бұрын
sounds like a plan mate, go for the plastic bed rather than this heavy thing
I'd imagine you have the truck done. But I have a Double E Arocs and it's that same truck as the huina just uses a linear actuator for the tipper. Order a linear actuator to tip the box.
@Pezzapoo
Жыл бұрын
Its still in a corner mate, I think you are right, will just have to get an actuator although it tips now tbf, just needs a fake palfinger adding. Ah who knows?? lol will see, thanks for the tip mate
How did you get the dump motor to fit in chassis?? Wanting to do this to my model
@Pezzapoo
3 ай бұрын
I couldn't fit it and I abandoned the project as it was not going to be worth it.
What type tyre u use?
@Pezzapoo
2 жыл бұрын
They are WPL soft KIt Metal tyres
Any update on the end result?
@Pezzapoo
Жыл бұрын
Currently waiting on funds to get more parts mate, other projects have taken priority but.will get back on it soon
Does the lift mech have to stay electric?
@Pezzapoo
2 жыл бұрын
Yes mate, no room or money for hydraulics. Sorted it now tbf that’s why there’s a gap, moved the wheels back to fit the servo
@grrfy
2 жыл бұрын
@@Pezzapoo i was thinking just a double thin syringe into single sriynge setup would fit inside the space if ran them horizontalinside chassis rails even driven by one of those screw servos likethe ones on upgrade excavator arm is surprising the force can exert with the double to single setup, and nice and compact
@grrfy
2 жыл бұрын
i did build an excavator with full arm and bucket operation from wood and same setup,was decent,o level A lol
@Pezzapoo
2 жыл бұрын
@@grrfy bonkers lol
@Pezzapoo
2 жыл бұрын
@@grrfy not something I m familiar with mate but a good call. I really wanted to not waste the current setup seeing as it works on the controller ok.
Hello. Nice. Where I can buy sond diesel simulátor please? Thanks for reply
@Pezzapoo
Жыл бұрын
WPL online, look for V3 thx
@josefkuruc2340
Жыл бұрын
@@Pezzapoosory, but I dont understand
I liked and subscribed
@Pezzapoo
2 жыл бұрын
Thx
এই গাড়ি টা কোথায় পাবো ভাই
@Pezzapoo
4 ай бұрын
This is custom, I never finished it