Love hearing a fellow scot in the hobby!

I have a 1573 and to be honest it does need modifying especially the ground clearance. I like what you have done so far and I can't wait to see it once it's done. Thanks for sharing 😉👍

So glad I ran across this video I had just purchased this TR 212 top race truck knowing what its capabilities was because I had bought it one time before and gave it to my grandson for her birthday. How about the second tr212 to try to upgrade and just received it yesterday it just so happens that I also had recently purchased the very same inexpensive transporter that you are using in the video to upgrade this made for pavement only truck. Like you said if a person wants a decent RC vehicle you have to do what you can and use your imagination sometimes to upgrade and at least get proportional controls thanks for the idea great video

really like that dump and how you did it really super good job

Really interesting video. I just received my 1573 in the mail and it really leaves a lot to be desired as far as the suspension is concerned. I’m pretty sure this KO’d is going to be one I’ll be trying out in the near future.

@GP-RC

3 жыл бұрын

Hi, thanks for watching. The chassis is a WPL 6X6 from AliExpress and comes complete with running gear, either a 130 or 180 motor ( can't remember which), wheels etc. The hardest part I'm finding is fitting the cab and tipper body onto the chassis, that's still a work in progress. Inside your Cab there are 4 large steel weights, what some guys do is remove 3 of those and leave one in. They say it helps with the traction.

Muchas gracias ya tengo una idea de cómo mejorarlo feliz día.

Love your work mate. I hope you do more as you get further

@GP-RC

3 жыл бұрын

Thank you, I'm just learning as I go along. I've changed the linear actuator for a more powerful one, It can now lift the tipper body with some decent weight in it.

@johndebree5091

3 жыл бұрын

@@GP-RC sweet I'm going to be doing something similar soon myself as soon as that very slow boat from China gets here lol

@johndebree5091

3 жыл бұрын

@@GP-RC I'm also got the two speed gearbox as well just to make sure that it's going to handle everything

@GP-RC

3 жыл бұрын

Yeah that boat really slows the building process quite a bit lol

Thank you for video

How about the brushles...replacment? Can you give info what type for brushless or brushed?

@GP-RC

3 жыл бұрын

Hi, the drive motor on this is a brushed 370 single speed, I got this one from AliExpress. I'm not sure about any brushless varieties sorry. I'm pretty new to all this and finding my way as I go along

I’m doing nearly the same thing as you. Well kinda, I’m using wheels and axles rom a wok. Making the frame and mounting everything else where I want it. Thinking about making it a tipper cab to access the motor like the 1:1

@kalebalessandro2978

3 жыл бұрын

I realize I am pretty randomly asking but does anybody know a good place to watch newly released tv shows online ?

@felipebraylen9463

3 жыл бұрын

@Kaleb Alessandro lately I have been using FlixZone. You can find it on google =)

@collinkamryn3185

3 жыл бұрын

@Felipe Braylen Definitely, been using flixzone for months myself =)

@kalebalessandro2978

3 жыл бұрын

@Felipe Braylen Thank you, I signed up and it seems like a nice service :D I appreciate it!!

@felipebraylen9463

3 жыл бұрын

@Kaleb Alessandro you are welcome =)

Hi, nice video, I like it, I have 2 dump trucks Huina and I’m thinking to modify them, question, are you using the same control and receiver?

@GP-RC

2 жыл бұрын

Thank you, I'm using a Flysky FS-GT5 transmitter & receiver, 6 channel.

Could u put a link up for the metal chassis too please.

@GP-RC

2 жыл бұрын

Hi John, I got it from here ￡1.81 7%OFF | JJRC Q60 Q61 D826 D827 RC Military Truck 4WD 6WD RC Car spare parts DIY car frame a.aliexpress.com/_v4j2jq

cool

Hi mate, great video. I have a question. I have a top race excavator (1580 I think) anyway, I'm after a tamiya low loader with trailer and motorised ramps but the Mrs is having none of yet (yes correct I'm not a millionaire), so, if I got one of those, removed the skip from the back, buy a tamiya hitch plate, couple of other odds and ends, chrome mirrors, roof spoiler, nicer mud guards, that wouldn't be too difficult would it ??? I'm quite good at fidgeting about with things, now, do u think I'd be able to extend the wire, have a connection at the back of the cab, and somehow use that piston to operate my motorised ramps??? Thanks John.

@GP-RC

2 жыл бұрын

Hi John, this is where I got my chassis.. a.aliexpress.com/_uxHwrY With regards to the trailer, I'm not sure as there is quite a difference in scale. The Tamiya are 1/14 scale and these are quite a bit smaller. Sorry I'm not any help on your question. I know some folk have converted Bruder trucks to this chassis and they are 1/14 scale. Search for Bruder RC Conversion and you may get the answers you are looking for.

@johnthegodfatherslack

2 жыл бұрын

@@GP-RC yeah I've seen the bruder trailers, but surely 1:14 is 1:14 across the board isn't it? Dimensions should all be very similar.

@GP-RC

2 жыл бұрын

@@johnthegodfatherslack that's what it should be like but sadly not. The 1580 excavator is advertised as 1/14 but it's more 1/18- ish. The Tipper is also stated as 1/14 but next to my 1/14 tamiya scania it's a lot smaller. If I get the chance later on after work, i'll try and do a size comparison video.

@johnthegodfatherslack

2 жыл бұрын

Great stuff, thank you.

@GP-RC

2 жыл бұрын

@@johnthegodfatherslack Hi John, I've uploaded a little video to show the scale difference between Huina & Tamiya. Hope it helps.

use what axle and chasis ?

@GP-RC

2 жыл бұрын

Hi, I got this chassis complete from Ali express. ￡1.91 | JJRC Q60 Q61 D826 D827 RC Military Truck 4WD 6WD RC Car spare parts DIY car frame a.aliexpress.com/_uxHwrY

That a wpl b14 chassis?

@GP-RC

3 жыл бұрын

Hi, it didn't state model number when I bought it. Just wpl 6x6 chassis on Aliexpress.

Hi! Did you finish the project?

@GP-RC

3 жыл бұрын

Hi, not yet. Life has been hectic lately. I have fitted a linear actuator to tip the dump bed. I'm on the second one as the first wasn't strong enough to lift any weight. Hopefully I'll get back to it after christmas time. It will get done 😀. I've got all the black plastic parts off just now ready for painting ( Cat Yellow )

@martinsrc8752

3 жыл бұрын

@@GP-RC I want to buy the 573 because i found a good deal and have wpl b36 to use for this build. I'v really enjoyed watching your video. I'll keep tuned.

@GP-RC

3 жыл бұрын

Awesome, thanks for watching. The wpl 6x6 chassis is great for these kind of builds. It takes me quite a while to figure out how to make things fit where they are not designed to fit 😅 but i'll get there eventually.

@martinsrc8752

3 жыл бұрын

@@GP-RC I've seen one guy rebuilding it like that. He even sells staff for a rebuild. I just purchased the dumper :D

and i have a 3d printer and i don't know how to work with it because i'm just an old donkey and old don't learn lol