Well done. I like getting cheap RC cars with missing controllers and converting them so they are repairable and usable. You have so many great ideas.

@MakerFabio

3 жыл бұрын

Ehehe, fixing cheap rc car is always a challenge. How much power can you put on them without destroying them.

Nice work!!

@MakerFabio

Жыл бұрын

Thanks!

My Guy, innovation at it's best.the Truth.

@MakerFabio

2 жыл бұрын

Thanks

Very inspiring video.

@MakerFabio

Жыл бұрын

Thanks

Very nice and simple 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@carloshnunez

2 жыл бұрын

Do you have a video of this Bruder to see how it performs? 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@MakerFabio

2 жыл бұрын

No It is a little slow because it is running at 3.7. But moves realistic (also because i set the accelerations on the taranis, and it is powerful. I could boost it to 6V and be much faster. Lets see if i find the time i can make a quick private video and share the linkhere in the comments

@carloshnunez

2 жыл бұрын

@@MakerFabio Thank you my friend

Good day. Good job. Can you please make a video how to make a servo a wheel drive motor. Please assist.

What servo did you use for the loader lifting arms...you stuck to the front..?

@MakerFabio

2 жыл бұрын

The big ones are always the same part number, link in the description

☝☝☝☝☝☝ very nice

@MakerFabio

2 жыл бұрын

Thanks

Ciao, è possibile vedere nel dettaglio come hai fatto con il servo per alzare la pala?

@MakerFabio

2 жыл бұрын

Ciao Devi rubare un po con gli occhi, nelle varie scene, anche nei primi secondi quando scarico le macchinine, si vede di profilo, non saprei come mostrartelo, e non penso faró un video dedicato a quello. Se non bastasse, posso mandardi una ripresa con whatsapp, anche se non so come faremo a scambiarci i numeri qui in pubblico

😀😀😀

Buona sera... Scusami per il disturbo cortesemente e possibile avere i dettagli della elettronica che hai usato.... Grazie mille

@MakerFabio

3 жыл бұрын

Bella domanda, grazie Ho messo la lista nella descrizione

@JPSuperMario

3 жыл бұрын

grazie....

Hi Maker, is it possible that you can send me that model file and I can post it to my station?

@MakerFabio

2 жыл бұрын

Hi Manuel, I m traveling for a couple of days I ll figure out how to share this WE

@Manuel-ti2zd

2 жыл бұрын

@@MakerFabio Hi Maker, let me tell you my progress. I have managed to place its parameters and everything was fine except that when the servo reaches its end (this only happens in one direction) it returns to its axis very slowly after about 5 seconds. Another challenge is that one of the arms of the robot has 2 servos, I verified that these parameters are not valid for this arm with double servo, it goes crazy, I would like to know your opinion, if it would be possible to assign the function I am looking for to this arm double, by the other arms, I don't know what problem can occur so that in one of the senses, they return to their axis slowly. Sorry for the bad google translation.

@MakerFabio

2 жыл бұрын

@@Manuel-ti2zd not sure what happens. Probably your limiters are not working correcly, check the video at minute 6:16, those limit are clamping and avoiding exceeding 100% but also -100% So you have 2 different logical condition for max and min Copy each line (multiplaxer type is replace and not add). About 2 servos not working , there i have really no idea

@Manuel-ti2zd

2 жыл бұрын

@@MakerFabio Hello Maker, yes, everything is well configured, it only happens at one end and in all the servos, it reaches the end and after about 5 seconds, it returns very slowly to its axis. I can send you a video to any address.

Gran bel progettino ...vorrei fare il Dumper 60H della Bruder ma non so da dove iniziare... mi aiuteresti??....bel video .. cmq lo parli bene in INGLESE ... Ciao da Fidenza PR

@MakerFabio

2 жыл бұрын

Ciao grazie Non conosco il 60H, modifico un po quel che mi capita in casa quindi non saprei aiutarti al volo. Faccio in inglese perchè sono un po argomenti di nicchia, mi vien da pensare che in inglese sia fruibile da piu gente

@danielemulazzi1615

2 жыл бұрын

@@MakerFabio ciao Fabio fai bene a parlare in inglese...come dici tu è po'ius fruibile a tutti...anche io mi diletto nel modificare modellini...ho iniziato con le hotwheels....comunque ti è venuto proprio bene ... complimenti.. ciao ciao

@MakerFabio

2 жыл бұрын

@@danielemulazzi1615 grazie Hot wheels, veeeeramente piccole. Bravo

Ciao Fabio ma fai questi lavori anche a pagamento?

@MakerFabio

2 жыл бұрын

Ciao, no altrimenti diventa altro lavoro. Cosi invece faccio quel che mi ispira al momento

Why can't I save this video?

@MakerFabio

Жыл бұрын

Hi, good question, i m not youtube expert and i didn t place any limitation

no se por que no empiezas el video de configuracion desde 0, tienes parametros introducidos, que no se de donde los has sacado

@MakerFabio

2 жыл бұрын

Sorry i speak only english and italian, not sure if i understand what you mean

@Manuel-ti2zd

2 жыл бұрын

@@MakerFabio You should make the video from 0, because there are many parameters that do not look like you included them and in the translation it is not explained

@MakerFabio

2 жыл бұрын

@@Manuel-ti2zd hi I see. I assumed how to add mixer inputs should be known, or at least there are many tutorials on this But you are also right , it would be handy to have it here directly Not sure if i ll do a video on that, i m more on the “trial and error” with the taranis, so not so good to teach eell. but i can try to publish my model file. Lets see in this days if i can download and post

@Manuel-ti2zd

2 жыл бұрын

@@MakerFabioThank you very much, I am trying to move a 7 axis robot arm on a tank and your video of how to do it is fantastic. All the best