People like the guy that was messaging u step by step are the reasons i love the car/motorcycle/scooter community. Ive literally fixed my broken down cars based off ppls comments and being told where to look. Most of the time with vehicles jts knowing where to look for an issue and knowing how to disassemble/reassemble. Its rare to find someone that will walk you through the entire process like this, but i guess the point of this comment is... ppl like that are still out there, And those are the ppl that make me love this community. Find one, make friends and build engines together for life

@nicholascarver1

5 ай бұрын

I liked then unliked your comment to keep it at 69.

@CVBFonzP7B

5 ай бұрын

@@nicholascarver1 i appreciate your efforts soldier

@tonnynijholt7090

3 ай бұрын

What a legend indeed

@fishingadventurewithEnrico

3 ай бұрын

😊😅 0:39

@bilalraja6745

3 ай бұрын

Warrior 💪

hahaha Malooooosiii. that really got me. I love scooters. When you are kid in Denmark, tuning scooters are your first intro to mechanic.

@boiboi1874

2 ай бұрын

rigtigt bror

@ayz48

Ай бұрын

Haha vi har alle været der 😂

@user-lq3ej7nd2q

Ай бұрын

Du har forstået det

Great job!! 🎉 Don't push it too hard for the first 300km: roll it nicely, warm it up properly, use a fatter fuel mix than the one recommended, then after that you can push hard and enjoy 🤟🏼✌🏼

@MaltheOrnbol

4 ай бұрын

i think thats is to late

@mosvan8256

2 ай бұрын

i think thats is to late

@hundai3378

2 ай бұрын

too*@@MaltheOrnbol

@khalss

Ай бұрын

Most defiantly too late.

@sexycowman

12 күн бұрын

100% too late. Seeing him start it up for the first time and start running it hard was a bit sad

The 14y old Italian teen experience

@logicone5667

2 ай бұрын

Shit, my 40 yr old Merican experience! (On a Chinese gy6)

@SimonBauer7

Ай бұрын

14yr old italian would be an old vespa they found somewhere, with crap paint, crap brakes but 40hp.

@stefano2709

Ай бұрын

40 ponies maybe @@SimonBauer7

As we in the netherlands say: ''Poah dikke getunde scooter''

@TwoStrokeJ

5 ай бұрын

Sounds good to me!

@faabberg

5 ай бұрын

Die uitlaat past toch ook op een peugeot rapido?

@ZafiraSteve

5 ай бұрын

Translate: phwoah, big tuned scooter

@foto2.090

5 ай бұрын

Of: “dik ding”

@basvanlangerak8423

5 ай бұрын

​@@faabbergnee, denk het niet, heb er ook naar gekeken toen ik mijn rapido had. Het blok van een Elite sr is anders dan een honda vision (en dus ook rapido). Het elite sr blok is een na mijn idee beter blok met meer capaciteiten als het hondavl vision blok

Always check ring gap. At least .004" per inch of bore. A 70 kit is usually around 47mm which is about 2 inches, so rings should have .008" gap minimum. Also, it's important to make sure the cylinder ports are chamfered. Many kits require you to do this. I know Malossi is higher quality but I still would have checked that. It's extremely important. I also would suggest removing the engine, as it's only a couple more bolts and allows you to put the thing up on a table where you're not crawling around on the ground. It makes it way easier and more pleasant to do the work. Although that just might be my old-man-back speaking...

@TwoStrokeJ

5 ай бұрын

I agree with all of this, but for this quick engine build I just did it the quick and easy way. Wanted to just get it done haha

@middlesiderrider

5 ай бұрын

@@TwoStrokeJ well it looks like it worked out well for you. Malossi must be on their game with that good quality control

@scottex.

5 ай бұрын

malossi makes them ready to put them on

@middlesiderrider

5 ай бұрын

@@scottex. I've heard that, but I'd still check. Kinda like how spark plugs come pre-gapped, but they are often wrong

@Sam-ob4of

5 ай бұрын

* at least 0,1016mm per 25,4mm; about 0,188mm ring gap

The Honda Vision was the one that started it all for me. I was 6 years old, my then 15 uncle and his mate had found one in the bush, probably stolen and abandoned there for a long time. They showed up with that thing and asked if I wanted to try it, I'll never forget the terror and excitement I felt as I twisted the throttle of a motorised bike for the first time in my life. Now, 25 years later I'm still hooked to anything that goes Brum Brum. Spent my teenage years in Italy riding modified scooters to school, after school and anytime in between that, those were the days! Keep it up man, that was a great way to spend 40 minutes of my life 🤙🤙

@Copperdude

2 ай бұрын

wow. insane

Good job man! As a fellow 50cc rider i suggest you get a 21mm carb like a Polini CP21 or a cheaper PHBG21 from dell'orto, also Malossi reeds, intake manifold (21mm diameter) and a cone air filter would change the bike greatly without affecting reliability.

@Tsenngu

5 ай бұрын

It is SO fun to hear these names for parts and carbs... I live in Norway and when i was like 17 (33 years ago) Me and all the guys got the 7HP or the insane 12HP kits for our mopeds with malossi and dell'orto parts!! I did not even know they were in buisness still. I had a Suzuki ZR 50 that i put a 12HP kit on with the carb and performance exhaust but it was so insane it twisted my frame and the bike became undrivable. it did 110 km/h top speed but with a slow acceleration. Bought a Suzuki 50 SL instead the chopper version and chilled down to the 7HP kit wich kept the frame from twisting

@kramnull8962

5 ай бұрын

That's the thing, with these kits, everything from hills, to daily atmospheric changes change the jetting. You can be good with the jetting for flat roads, but go to pull a 2 mile hill and they will go lean. Like him, I was suggested an 85 jet for the 21mm and a 90 would still be lean going uphill. I even installed a 91-100. If I got it rich enough on a hill the flat roads were running super rich. Only thing I could think of was for one, the cable that adjusted the 2 stroke oil feed was constantly shrinking and expanding, alternating the oil into the feed. Not to mention the dang rear pulley even a brand new one, would get worn in no time and not change gears properly. No spring is going to overcome those pins inside that rear pulley half from digging into the slots they ride in; hanging usually in mid range gearing on the rear pulley, never highest gears or the lowest gears. Kinda like the "Throttle position sensors"; they used to get an area of the gas pedal that would start to glitch while driving @ 45 mph because that is where the gas pedal is mashed to 90% of the time. That wasn't a metal quality thing like with the rear pulley, but just saying the most used gear is going to cut right into that part of the rear pulley slots first and foremost. These gears are made for 75 pound people..... And going 2-5 miles tops. And flatlands....

@EbonyPope

4 ай бұрын

@@Tsenngu 12 hp are not enough to make any metal twist. I'd say the problem was something else.

@FreDEV_OFFICIAL

Ай бұрын

21mm is way too big for the engine and cylinder, 17,5 would suffice more than enough on this type of engine.

This is what most of us in Europe run for a budget, sporty wheelie build. The 70cc Malossi cast iron performs well. Al tough a lot of people do prefer the DR70 cast iron above the Malossi kit. Both seem to perform about the same with the Malossi having a tiny bit more top end. With a full volume crank set, a 19 mm carb with a good expansion chamber exhaust like a Yasuni R if you can find one in the states, a bigger intake manifold and thicker reed valves or a reed valve kit this moped wil fly! It will throw you back without any effort. You can go a bit lighter on the rollers as well 6.5 is the sweet spot for now. Have fun, stay safe!

@TwoStrokeJ

5 ай бұрын

yep, thanks man! A budget wheelie build was exactly what I was going for, but maybe down the road I will tune it further like you said!

@wielisziel

5 ай бұрын

@@TwoStrokeJ yea you need a exhaust with a bend, not sure how to call it in english. i have a yasuni R under my malaguti phantom F12, great exhuast

@Shadow-ew7wv

5 ай бұрын

​@@wieliszielYou dont need a exhaust with a bend

@extec101

5 ай бұрын

@@wielisziel you mean a snake nest exhaust?

@darekmistrz4364

5 ай бұрын

@@Shadow-ew7wv I agree. "stock" like exhaust will have less power overall, but offers much better bottom and mid range torque

you're criminally underrated, bro. it's clear that you're putting a ton of time and work into your videos. +1 subscriber

@VikingRul3s

5 ай бұрын

What? He spend a day playing lego with engines parts, toke a joy ride with helmet-cam and you call that putting in a lot of time? At his age i practically lived in my dads workshop, creating the fastest scooters in my local area. I sometimes spends weeks dialing in the perfect jet, roller, tension spring and clutch combination for a build...

@samarthakur4u

5 ай бұрын

​@@VikingRul3sstart your channel bro , I will watch and subscribe for sure. Stay connected.

@gronk2714

5 ай бұрын

​@@VikingRul3sYou want a medal?

@VikingRul3s

5 ай бұрын

@@gronk2714 Are you offering one?

@gronk2714

5 ай бұрын

@@VikingRul3s Yes

That video reminded me my childhood - before (and even little after 2010) those 50 cc scooters was a go. Almost every teenager in my country had one and we even had our own community. Imagine a dozen of scooters zooming through the streets in line, popping wheelies on a secluded streets, working on them with friends. Performance mods is one thing but the cosmetic was also important - two tone paintjobs, polished aluminium parts... Heck, we even had a guys with a sound systems built inside the storage space under the seat (built from one/two speakers and a car radio or amplifier). Now I'm a 30+ years old guy and I see scooters being used for food delivery and casual cruising to work but there is no communities like those from 15 years ago. And no crazy builds. And some of them have electric motors. Now hear me out - with the set up like this I think You should easly achieve even 60 mph! Also, if I were You, I would entirely throw out the oil pump and do the oil and gasoline mix by myself. Then, for the new cylinder set I would add a bit more oil for the breaking period ;)

Never thought I would ever watch a full rebuild video on a Honda scooter. Well done.

if you look at the old piston you really can see why it was running so bad. the rings where worn out and there was lots of blowbye. Also you can hear it from the sound and how its trying to run at the start of the video. oh and a quick tip to get the contra spring nut off, just throw it upsidedown in a vice and twist it by the pully

@TwoStrokeJ

5 ай бұрын

Yea it did look like the old top end had some wear on it. And that’s a really good idea for the contra spring!

One thing i have always learned is that if you can, get the 6 point socket at ANYTIME over a 12 point. 12 points just seem to strip the shit out of any bolt/nut after a few times of being taken off and put back on. 12 point sockets have their uses, but honestly i don't use them for much other than hammering onto a stripped bolt at this point.

@hilo4noff1

5 ай бұрын

Amen brother

@Ricardo_Moto

5 ай бұрын

Yep!

Hey, i was the second of 2 mechanics in illinois biggest scooter dealership for 2 years until they downsized a few months ago. I had taken apart your exact bike hundreds of times and replaced everything imaginable on one of those, just wanted to say love the video. it really gives me a calming feeling of nostalgia and happiness seeing someone figure out how to assemble a big bore kit, after id struggled with them for so much time. be sure to work on some old vespas and piagios next! Those will make you reevaluate your life

Awesome! , just a tip : paint a little area of your floor white where you're going to mess with small parts , makes a lot easier to find them 😂

Cincys finest motovlogger hands down. Editing, content, commentary all is on point. I rode with you on my sumo before i lost my finger in my wreck, such a cool dude and your videos are only getting better and better.

I love how delicate the work is regardless of the machine ur working on

@VikingRul3s

5 ай бұрын

So you think all mechanics work are delicate?

Love it dude, happy to see you bring more attention to these fun little machines!

I’ve seen your video before. Great watching it again. You did a superb job following the excellent instructions!👍🇬🇧

Great build. I love the fact that you were openly nervous. Im nervous about most of the work i do on bikes. Great work buddy.

ngl this is actually inspirational, i REAAALLY want a scooter now... we gotta make Scoot Central an international thing, with 2stroke J as the leader

@TwoStrokeJ

5 ай бұрын

Yes sir!!! That would be amazing! I really think everyone should get into modifying scooters though, they are so fun

@aaronwetzel1981

5 ай бұрын

Scooter modding scene is huge and has been. Especially with these af16 motors

@dovydas4036

9 күн бұрын

Scooter tuning scene is massive bro ​@@TwoStrokeJ

This is some high quality, fun content. I also appreciate how organized you were, made me happy. haha

Thinking about doing this for my Julio, excellent upload, thanks for the inspiration!

10:40 a pain everyone who has worked on a bike has most certainly felt lmao. When it happens I go slo-mo and start listening to where it lands lol.

@Rawmusse

5 ай бұрын

Time slowing down as you freeze in place ffs, too real.

@TwoStrokeJ

5 ай бұрын

yep hahahah, and if you don't hear where it went right away you just know you lost lmao

@TwoStrokeJ

5 ай бұрын

lmaoooo so true

@derick-smith

3 ай бұрын

I learned that slow-mo trick assembling model cars as a kid! Anyone who has ever dropped a tiny part has felt that pucker that comes after lol

Try it with the old center spring for the clutch it could be even more responsive. It just depends on every scooter. Btw that 70cc should top out at 110km/h if you lose the airbox

@TwoStrokeJ

5 ай бұрын

yea I bet the carb and airbox is the biggest restrictor rn

@sodaman5048

5 ай бұрын

@@TwoStrokeJ get 19 or 21mm carb or something and polini airfilter

@janiuyt8630

5 ай бұрын

@@sodaman5048 you forgot that you need to throw out the dellorto and get a pwk

@sodaman5048

5 ай бұрын

@@janiuyt8630 dellorto good bro

@Shokai899

5 ай бұрын

naaaah, airbox is the biggest friend here, cause 2t engine is so vulnerable about air "pulses" back and forward and amount of vacuum in the intake. Leave it alone, max you could do is drill some slightly bigger intake hole in your box. and naaaaah x2, honda vertical af-18 never gonna go 110km\h on malossi sport spec. Even much more tune-able yamaha jog will not. Around 75- yeah, maybe 80 @@TwoStrokeJ

Oh my gosh! Thanks for the video, much love to your OG friend! I really enjoyed this one❤

Finally, KZread recommends something worth watching. great job bro

Yo broo!! i am so happy you finally upgrade this scooter good job!!!🔥

@TwoStrokeJ

5 ай бұрын

Thanks man! It’s better than I could have ever imagined

Anytime I go with a new top end I definitely take the time to Port it since you already have it off and you gain at least 10 to 15% more power on top of the upgrade.

This was my dream when I was 13. BTW I'm 29 now. A friend of mine had a Honda dio ZX. The only thing we did is tune it to 72cc with a unrestricted CDI. A few adjustments on the vario weight. It was fast like a rocket. Because of the lack of money back then, I couldn't fullfil my dream to tune a Dio with a 125cc exhaust carbs and everything. There was a kit on eBay back then for 600€. That was out of my league for then. Now I make more than enough money but I live in a city , in another country, no garage what so ever.... I wish I had a little money back then. Good to see someone did what he wanted. Nice video mate

not too long back, some mates and myself turbo'd an older 1989 Scooter from Europe. it ran like an absolute champ,until it didn't. After about 250$ in simple parts to fix wear and tear,and small other improvement parts added,it ran and is still running like an absolute freaking beast. We have put sand tires on it, and taken it out to the dunes a few time. its just such a fun, and totally bonkers ride..the turbo added some surprisingly powerful oomph..it's one of those things you just have to experience, we have had a many people come up to us and ask "What is this?!?!" Anyways, loved this video dudes! What an animal you all made! And what an awesome dude who gave you all the info step by step of how to fix everything! That is not only a mechanic, but a Man with passion about Engines and the Vehicles they go with! Much love Stroke!!!!

@TwoStrokeJ

5 ай бұрын

thanks for the story and glad you enjoyed the video!!!

@coscorrodrift

2 ай бұрын

lol, turbo'd? what size's the engine and where's the turbo from?

Man this takes me back. Some 20 years ago I had a Gilera 50cc with the exact same mods! Different exhaust but the same engine parts. Polini and Malossi have the scooter secret sauce. Great video!

@simes205

5 ай бұрын

@@sig2322I had a typhoon with a 172 kit plus other stuff……it was quick! Wish I kept that one 21 years ago!

You should put fullvolume crank in that engine plus ct manifold to accomodate much larger size carb and gearings too. Believed me! It will fly!

@TwoStrokeJ

5 ай бұрын

That would be sick, maybe some day i'll do a full engine build on one

I never comment but from someone who used to always build aprilia sx50 (geared 50cc), this videa was just insaine! Thank you!

I don't even own a scooter, yet this came up on my recommended videos. Watched it from start to finish. Nice build!

Nice vid man, this scooter (Honda Vision) was quite popular in the early 90's here in the Netherlands, this is also the time scooters became very popular because you didn't have to learn how to shift and because of the CVT it wasn't slow like older automatic shifting mopeds and a lot cheaper to insure then a manually shifted moped. Illegal Scooter/moped tuning still is a thing here but harder to get away with these days, damn cops! A bigger carb something like 18mm and a better intake&reed valve should make it even faster.

@stephenhepworth3113

5 ай бұрын

Exactly the same here in the UK ( also called a ' vision' here too) 👍 I still love these tiddlers.

@kroketfilet

5 ай бұрын

the 130cc honda vision by dutchriders is a real death machine

@EdgeOfPanic

5 ай бұрын

@@kroketfilet It sure is 😎

@fermitupoupon1754

5 ай бұрын

Getting away with it isn't hard, it just costs way more money. My looks-stock Agility 50 has been modified with EFI, so when the cops pull me over for dyno testing (rollenbank) I just don't poke the app on my phone that switches to the "sport" fuel map. Cops invariably know something is up, because it cuts off at about 5000rpm instead of 6500rpm and it usually shows up as 52-54 kph. Even if they take off the cover plate that would house the CDI normally, all they'll find is an ECU without its Bluetooth sticker on it. If they open the carburettor door in the bottom of the seat, they'll see an injector and throttle-by-wire intake. Mostly I can make the cops go away after arguing about how it's for fuel economy. Worst things I've happen so far is a cop breaking the quarter turn throttle handle, because he thought it was jammed by some sort of restrictor mechanism. And one that asked "so where's the carburettor" while staring at the fuel injector assembly. With the sports fuel map loaded, it does about 65kph, which is fast enough. I've done quite a bit of modifications, but mostly because my friend bought a new cnc lathe for his shop, so yeah custom final drive, custom camshaft, reveno clutch pack, it's mostly "because we can" kind of things.

@shuenshuen

5 ай бұрын

​@@fermitupoupon1754welk bouwjaar is je agility? Ik ben altijd nog 2t tot de dood dus injectie ben ik ver van weg gebleven, ben wel benieuwd wat voor prestaties/specificaties er deze dagen in zitten

It's amazing how old machines have more support than recent machines does as to upgrading and finding parts for em. I can feel the happiness from that initial start when it literally started like a brand new bike man!!! I know how that feels and pretty sure had one that didn't start most of the time except when it's cold LMAO. Used to have this 80's honda cub that I ride around with before it got stolen man, I even put a 125 mixed kit on it and everything and honda parts rarely change over time so it's easy to freakin mod. This one takes the cake though! Nice vid man :D

This video is awesome! Fantastic editing to keep me engaged. Loved watching you work and ranch, you definitely earned a new subscriber:)

I like the performance of the scooter after you change some parts to double the power of it bro.And the cleanliness of the scooter like a new one.Nice scooter modification.Keep safe driving..

Nice video man, im also in scooter tuning here in Austria.. i would guess you to switch the roller weights maybe all to the 5,6g then u maybe get better acceleration bcus the engine is more in to the power range at more rpm..

A bigger carb and a new airfilter is necessary, as the engine is basically being suffocated right now. The scooter won't get any more complicated or any less reliable, it will just run better and make way more power. And you shouldn't worry about having to tune the carb, as it really isn't that difficult. You just pick the right jet, which doesn't take too long through trial and error, and then you adjust the air/fuel ratio and the idle. After all that your malossi kit should max out at about 70 mph.

@Lele-vi3ru

5 ай бұрын

And change that shit exauste buy one fron malossi or polini

@realkilju

5 ай бұрын

This one is a quiet sleeper exhaust

@Russ14n.

5 ай бұрын

@@realkilju yeah like a gianelli go or something similar. He should get a yazuni z instead.

Well jealous of that bike man. Looks and sounds great, well done mate.

Great video brother! 71,000 subs and 1.4 million views, nice work! I love the vehicle community. I have a 7.3 powerstroke and through forums have been able to message with the original engineer of the 4r100 transmission that's in the truck and many other engineers of the truck and motor, it's crazy to speak with these OG's personally! It's amazing how great people can be and how much they are willing to help others. I have never taken my truck to a mechanic soley because of the community and culture around vehicles. I just subbed, I like your format!

you will need a bigger carb for more easy power. 15mm minimum for 70cc but 18 or 20mm will be great, and then play with air / fule mixture and you'll get better acceleration and pull.

@kingcrack4422

5 ай бұрын

17 is stock on that honda bro.

Bro is making it Look easy

Looks like so much fun! Great video editing, you've gained a subscriber.

Had this bike and used to ride it everywhere when i was a teen, great seeing this! love your content

If this is the original carb, you might wanna buy a carb that's 2 to 4mm bigger. A carb that's too small for the amount of cc's is also restricting A LOT of power.

@TwoStrokeJ

5 ай бұрын

Yea I agree it’s restricting power, but I wanted to use the stock one to hopefully keep the engine really reliable

@Toxic2T

5 ай бұрын

A 26mm Mikuni from the Yamaha DT 125/175 is a must-have. A no brainer.

@Toxic2T

5 ай бұрын

A bigger carb won't reduce reliability unless it's lean or too hot.@@TwoStrokeJ

@klapman1

5 ай бұрын

@@TwoStrokeJ this is a common misunderstanding since a bigger carb does not have anything to do with the reliability of the engine. Those malossi cilinders are made for big carbs, so it would even be a good thing for the engine.

@klapman1

5 ай бұрын

Also, old carbs are less reliable since they are worn more. It wouldn't be a bad thing to replace the carb to one that's the same size if you care about the fuel economy.

be prepared to change the piston sooner since 70cc wears out faster and if you do alot of top speed pulls they wear out really fast, also a bigger carb will give you more power but this is as good as it needs to be

@nico-broo

5 ай бұрын

The malossi sport is a really durable cylinder

@wash.625

5 ай бұрын

@@nico-broo im talking about piston they do wear out sooner and you will loose alot of power

@miguybaltasar1111

5 ай бұрын

​@wash.625 My father did the same swap for his Suzuki 50cc when he was young (50cc were extremely popular in Spain), and he always says that eventually, the motor brakes due to the difference of pressure.

@wash.625

5 ай бұрын

@@miguybaltasar1111I am from croatia and scooters are still popular here especially piaggio and people tune them in all kind of ways and I did them too, 70cc really opens the power but it wears out much quicker which isnt a big deal since the piston and cylinder malosi is really cheap to replace every now and then

@mark675

5 ай бұрын

​@wash.625 especially when you don't run it in properly

tq so much bro for this rintroducing Honda 2stroke scooter recording video that i never know it exist since i was a honda bike fans that it is so incredable , long-lasting and durable bike. surely i fully support ur video n just subscribe ur chanel . may god bless u bro!

To be able to just look at a CVT for the first time and basically figure it out on your own…fair play 👏👏. The starter thing is a Bendix, so well done Mr Bendix

dont know a lot about you current exhaust but i can assure you if you get a yazuni R, yazuni c16, Yazuni c21 pipe you are gonna get it to go 50+ mph and even e bigger carb you can go even beyond that. Here in finland the moped scene is HUGE every single teenager gets their moped licence when they turn 15 so it is not that uncommon to see scooters going 60+ mph (the legal limit is 27)

@TwoStrokeJ

5 ай бұрын

Yep that’s awesome man! I am going to keep the stock carb for now for its simplicity and hopefully it helps keep the engine more reliable over time. Maybe some day I’ll do a build with a big carb

@rihardstomsons937

5 ай бұрын

noo they to big for this Cylinder

@wielisziel

5 ай бұрын

@@rihardstomsons937 nah there not, i have a yasuni R under my DR70, great combo

@Maro2196

5 ай бұрын

For this cylinder yasuni c16 and c21 is a overkill

You should buy a tomos 49cc 5 speed moped/motorbike they are really good looking bikes and are quite good at wheelies and stuff Edit: they are also very customizeable from the bars to the 74cc kits and custom dellorto carbs, ive seen some that make 15hp at 74cc

@TwoStrokeJ

5 ай бұрын

I would love one of those, but they never sold them in the USA sadly. I would have to import one

@monkeyman_401

5 ай бұрын

​@@TwoStrokeJ nah they imported them we rocking wheelies on tomos in NC for dayys your forget trimmer and makeshift?

@klemenkoprivnikar6945

5 ай бұрын

@@TwoStrokeJthey were imported around 1975 but they are probably very rare now

@evanknight3629

5 ай бұрын

@@TwoStrokeJthere is a place in South Carolina that has a ton of them for sale in Columbia

It's fun watching you guys discover scooters. I live in France an we get to have one at 14 years old. Those were the good years

This really takes me back to the 90's when i was in high school, loved it. One thing to keep in mind when doing this, is that the scooter will now require a lot more maintenance than the standard setup. Which can get annoying if you drive it daily and are counting on it to get you places. The fun factor of a geeked up scooter is incredible though

@EbonyPope

4 ай бұрын

Why more maintenance? These are quality parts. I think he shouldn't have to regularly rebuild them.

@stevenclaeys3602

4 ай бұрын

@@EbonyPope stuff always breaks when you install parts like these. I knew several guys who broke quality crankshafts playing around like that. You're constantly having to adjust the carburator, replacing the clutch springs, replacing the clutch itself, the variator weights, valves break easily, etc. All that stuff wears, breaks and gets dirty at a faster rate. The number of work hours you'll put is ridiculous compared to a stock scooter

I’m a 31 year old, I’ve been riding since I was 15, I had a 50cc Honda scooter about 15 years ago and this brings me back and makes me want one! - old father with a GSXR and a few other bikes, now craving a scooter 😂

@-sandman4605

5 ай бұрын

Me too 😂🤣😂 😎👍 🦘🇦🇺🦘

seeing you holding full throttle on a brand new cylinder almost gave me a panicattack, that shit couldve blew up at any time

@TwoStrokeJ

5 ай бұрын

I’ve beat on a lot of fresh builds and never had one blow up. Not saying it’s a good thing to do haha, but I’ve never had an issue

@abahaawas3889

5 ай бұрын

@@TwoStrokeJ damn bro your lucky, my 70cc blew up because i had it on idle abit to long :(

u have my sub bro. That ride in the end with the boys was fire!

Nice, we've been doing the same for years. Now we're up to triple and quadruple the original power and even more on the bleeding edge of kits and bespoke engines, up to 100 hp. I run an old, 1980s 70mm kit that is still in production and currently looking at some of the more exotic offerings for my 1960s scooter. Best of luck and keep on going faster! :)

Bigger carb would do wonders on this bike ;D

@ambientmekanic386

5 ай бұрын

Totally agree

remember to break it in instead of giving it full throttle. We normally break it in to 155 miles.

@TwoStrokeJ

5 ай бұрын

yep, had to send it for the video haha so didn't have the proper break in im sure

@VM61131

5 ай бұрын

@@TwoStrokeJ Oh okay! How is the Puch Maxi doing? Saw it sat without a cylinder, why is that?

were in indonesia really loved to upgrade our scooter, this kind of stuff really brings joy.

Got the same excitement watching this video as I did working on mine and making it fast. I also found that a racing CDI does wonders after swapping the cylinder. So does changing the carb. I went for 26mm nibbi carb. Keep in mind it drastically increases fuel consumption and your cylinder might heat up if you floor it for long.

Your contents are awesome and seriously deserve more attention. I'm curious as to why big scooters with actual motorcycle engines like the Honda ADV and Yamaha Nmax with either 150cc or the 300cc don't sell there in the US

No top speed! WTF

Nice work and props for keeping it looking oem!

V cool. Back in 2009, I bought a fully mod Honda Dio scoot & its was a frikkin weapon. Put ear2ear LOLs everytime I jumped on it. Pulled every single car (& lotsa bikes) at the lights every single time. Wish I still had it. Watching your vid brought back great memories. Heck I might just start to look at the local buysell for another one 😁

Need bigger Carb

finally a new moped vid

@TwoStrokeJ

5 ай бұрын

For real man, best vids for sure

even though it's long, at least he finished it in one video, love this

If you took of the shock, then its only one long "pivoting" bolt holding the engine to the frame (remember the fuel line and a few wires).. its much easier to work on if you take it of and put it on a bench :) Also, if you can work on one of these 50cc scooters, you can work on them all.. 90% of them have the same engine (Motori Minarelli) with only the angle of the cylinder and one of two lenghts of the vario part of the block :) If you wanna learn more out em, watch the europeans, they have had a crazy market in it.. Since you have to be 18 to drive a car, and 16 for scooters, most if not all boys have scooters, many many many used to tune them (myself incl) Great fun! Remember seeing people going from 3-4 hp standard to 20+ hp with NOS and stuff.. It got kinda wild :p Also, here's one of my fav old vids from way back.. Thought you'd like the wheelie skills ;) kzread.info/dash/bejne/ooaum8xqYbLeg6g.html

can i give 5 more likes?😅 I'm about to get a moped scooter, love the Honda Ruckus style, wish me luck cause I will do the big bore kit😮‍💨😋

So basically you just rebuild everything..

@jme2261

2 ай бұрын

So basically buy a faster bike 😂

@wadeloxs

Ай бұрын

What did you expect? Him to put a turbo and nos in it?

@_Ciosu..

Ай бұрын

@@wadeloxs What do YOU expect ? Do you even understand the situation ? Do you even watch the video ? Can you please read the title of the video and explain to me what it means ? I'm waiting.. You probably not even in this world that this topic is about. There's a difference between an upgrade and a completely rebuild everything.. Nos ? Turbo ? It's not a car. It's just a scooter. Chill dude..

@derp195

Ай бұрын

@@_Ciosu..lol you’re way too angry over this.

@wadeloxs

Ай бұрын

@@_Ciosu..womp womp

Ive owned an elite e for a while, just picked up an sr and im excited to do some things to it! Great video, going to be using this later!

the thing were you put your friend's advice during that part of the buid was a genius move

There should be more vids like this. Scooter tinkerers are on the decline! Subscribed my scooter bro!

You can’t beat a ‘dirty 50’ like yours at beginning ! I truly hope they don’t disappear forever.

It is really nice you had a personal shopper and mentor. I am out on the bleeding edge of stupid with a Jetson Bolt Pro. I got like, 5 useful YT vids and the rest I have to figure out. I am having a blast.

dope video, coming from france, it reminded me my youth with my best friend, We used to tune our scooter all days and nights to get the best performance out of our machine xD I owned a MBK booster and used to ride stage 6 70cc aluminium kits with malossi exhaust !

Wheelies on a scooter is crazy dope! Good job dude! 2021 diax here

That was sick ! I miss my 1984 Honda 50.

That is so cool, brings me back to my childhood days in Germany

Just watched your video totally entertaining the build and the after video of u going through the streets. Thxs man..unfornately that kit costs way to much to buy here in South Africa its really what i need to enjoy scooting...

First video I’ve watched and I love it buddy keep it up with these engine builds there awesome builds

You just earned a new subscriber, thnx for the videos!

Not into scooters at all and never seen a video of you before but this is pretty slick. Good editing and voiceover! Makes me want to get a scooter too haha

Definitely pick yourself some circlip pliers. Kinchrome do a great little set that are reversible, so they will both pry open as well as squeeze closed. They are only like $20, and come with a bunch of interchangeable heads. For the amount of functions they perform at that price, they are invaluable.

i like your content bro. keep posting about scooters more 👏

Scooter squadron cotrolling the city is epic 💯🔥

Great job J !!! But you have to break in your new , expensive top end. also dont wash everything dry. wash it just like you do the dishes. lots a hot soapy water. I use Dawn.

This took me back to my early teen years, 15-17. I'm in my mid 30`s today. Boy is it fun to both tinker with and drive. Youth in Denmark today don't drive on tuned mopeds.

Whoever REELED off the full instructions over text REALLY knows their stuff!!

great video bro i want onew these with the upgrades be sick and few extras just make it a bit faster than it is

Man, your videos are really informative. I'm watching from Turkey and I send my greetings to you🇹🇷❤❤❤

prolly the most entertained i benn in a while bud great vid

Wow awsom mods and build dude....Subbed

Matching the beat with the ratchet 😮😂😂love it

I had a lot of fun on a Honda c90 when I was young, they drive off-road surprisingly well.

Noice! I have a 100cc upgraded to 135cc..NOW, I'm literally on local marketplace looking for Honda Dio..THANKS to you...new addiction and money to burn 😁😁