13:50 - that should be a hour Longer! not an hour less 🤦‍♂ Can you tell I dont script out any of my videos 😂

@ArtemiusMiave

8 ай бұрын

could i checkout the profiles you used?

@Theguys1212

8 ай бұрын

I cannot find that galaxy black filament anywhere on Ella goose website. Are you sure it is not made by a different manufacture? Or have they just not released yet?

My last 3D printer was an Ender 3 & im in the market to start again. How far 3D printing has come is incredible 🤯

I'm glad you mentioned the z offset issue, I'm having the same and thought I was going crazy

Loving my Neptune 4 Max so far! Printed out a Flatbox and a CherryBox leverless controller from Printables and they both came out amazing using your OrcaSlicer profiles! Thank you so much for the great content!

@UncleJessy

8 ай бұрын

Heck yeah! Excited to hear that and glad to hear they worked good!

@racso24

8 ай бұрын

@@johannesbatzersame

@treybeat5064

7 ай бұрын

What tier are the profiles on? Or where can I find them?

@angrybeaver6667

5 ай бұрын

How do I get the orca slicer profiles? I am about to get my neptune 4 max this week and I wanna get started on the right foot.

@Jackpsycho

4 ай бұрын

I have the same profile but the prints are ugly my I have to put more slow?

As someone who is running older printers with a sonicpad to get klipper functionality. I am interested in seeing how these bed slingers compare to the core xy options that are out now. Hoping for a deeper dive into that. Awesome to see some promise already.

Looks great! It would be good to see a comparison of print times, for the same model, with older machines, to get an idea of how much faster these prints can be - if that would be interesting.

Since Elegoo announced the Giga with larger nozzles, I'm optimistic that they will be available at least by next Spring when that's supposed to be available. I have a 4Pro and was considering adding this, I'm using the Neptune for rough drafts before doing slow AF final prints in my BCN W50 and have had a ton of issues with supports, stringing and under extrusion so I think I'll be waiting for now to see the status of larger nozzles and sorting out slicer issues. I dislike Cura and will have to look into Orca, unfortunately the BCN also uses a skinned Cura and it's been hard to find an alternative that lets me do enough tweaking to supports to ensure successful prints and can support the IDEX on the BCN. Thanks for these reviews, it's super helpful to sort through all the options!

@danielmontoya1832

2 ай бұрын

What are you make if you don’t mind me asking and are they all one tone

Elegoo is so weird, they are so fast with releasing hardware but the firmware and software is always needing to be upgraded or fixing somehow. It is like they barely test it before releasing it😂

@dack4545

8 ай бұрын

4.8 Cura is fine and they have new firmware for the 4 and 4 Pro get the Bed leveled an let it ripppppp

@umutkucuk7213

8 ай бұрын

Yes Support and Firmware very Bad ...

@Worldofmikes

8 ай бұрын

@@umutkucuk7213thats correct i return my neptune 4 max

@garylangford6755

8 ай бұрын

i use prusaslicer on the neptune 4 and no issues. idk why they even bother with elegoo cura

@shoumikahmed6373

8 ай бұрын

I think cura is not ready for high speed printer.For example, speed is not adjustable for the first layer after support. You need to slow down whole top and bottom layers. If elegoo provide software support neptune 4 pro will become one of the best printers.

That Galaxy Black PLA has produced some amazing prints for me too. It's just uncanny how good stuff printed with it looks!

@UncleJessy

8 ай бұрын

I just ordered 5 more rolls of it 🤣😂 I’m obsessed

@Voidmonster

8 ай бұрын

@@UncleJessy It makes for a GREAT filament to print things for the printer because it pretty closely matches the long extrusions that the bed rides on!

@user-fp5sd6sr1z

8 ай бұрын

Got a link for the filament you used?

@scott5017

8 ай бұрын

Odd elegoo told me its not for sale and i dont see it on the website, how did you get it?

I have an Anycubic Chiron with a huge bed. My solution was to build a wooden wheeled cart with heavy locking wheels. That way you can roll it out of the way when not in use or wherever you have the space for it when you are printing. That way it does not take up valuable counter space. The shelf underneath can hold tools, filament, etc. Maybe you can collaborate with a woodworking creator like Bob from "I like to make stuff?"

My Neptune 4 Pro has been running almost nonstop since I got it probably six weeks ago. It's great. The only issue was the LED on the print head dimmed to almost nonexistent after 100 hours of ABS prints directly over a 110 C print bed. I'm waiting for Elegoo to make a Neptune 4 Pro Max with steel rollers on steel rails. I think that will be a significant improvement for print quality and reliability on a fast large format printer that is accelerating a relatively heavy print bed. Elegoo should have used a Volcano compatible nozzle for all of the Neptune 4 series. They all print the same materials at the same speed. Making proprietary high flow nozzles when there is already a standard is not customer oriented. It's not as bad as some of the proprietary stunts Qidi has pulled that convinced me not to buy any more of their printers (I bought seven), but it's still needless market complexity and hassle that we don't need.

@nanneborn4523

6 ай бұрын

Hello, I also want to buy a neptune 4 but there are a lot negatieve reviews. What slicer to you use?

@Liberty4Ever

6 ай бұрын

@@nanneborn4523 - I use PrusaSlicer. I loved being able to send G code directly to the Neptune 4 Pro via the Fluidd web browser tab rather than previous printers where I had to load the G code onto a micro SD card that was then plugged into the printer in the most awkward position imaginable. Then I started sending the G code to the Neptune 4 Pro directly from PrusaSlicer. It's as easy as 2D printing a document from LibreOffice. Why did it take so long before Klipper made this happen? I'm now a huge Klipper fan.

just ordered mine last night, cant wait to set it up, been awhile since i had a 3d printer

Hey Awesome video can't wait to see more. Thought you should know at 15:30 your volume changed and went quieter.

I was on the fence on buying this, but now you have convinced me to pull that Triger.

The only issue I've run into with the fan module is with some tree supports on larger prints, printing at speed, they can flex and get caught on the fan. I ended up taking the module off and slowed the print speed down to about 225mm/s and haven't seen any negative results.

good video - new to 3d printing and researching options. Narrowed down to Prusa XL, Bambu X1C and the Neptune 4 Max. For a first printer, I think I will go with the Max. Thanks for posting

@praneetguharoy3359

5 ай бұрын

Why did you not go with the x1c??

Have this printer myself and love the results but had a couple of issues. First the gantry wasn't square, I actually had to shim it to get it truly square. This was causing me to have inconsistent layer heights as the print got higher. 2nd the bed sensor doesn't give a consistent z on home. I frequently have to change the offset +/- .1mm to get a good first layer. 3rd... they used a very old distro of Debian that will not support updated versions of Klipper and the Fuidd interface they have chosen gives incorrect data like stating the start time of the print is the projected end time. Of course because Debian is so out of date, the arguably best choice for camera support, Crowsnest can't be installed. The included camera support will keep the camera up for an hour or so but will need a system reboot to bring it back once the camera is shut off by the system. I put in a ticket with Elegoo and they were very insistent that nothing of the software be changed and the z sensor is working as intended. With all that being said, it's a good printer, it just needed a little more tech savviness on the software end in my opinion.

My printer comes later today, I will have to for sure try our that slicer and your files.

I ordered a 4 Plus last night as my first 3D Printer. No idea how long it'll take to ship. Suffice it to say I'm looking forward to your review next week 😅 It was between 4+ and the SV06+ for me but Klipper+WiFi won out.

@Immolate62

8 ай бұрын

I'm excited for you. You picked a good time to enter the fray.

@jasenhenry

8 ай бұрын

fwiw my 3 max took about half a year. stock was low at all suppliers at the time

@hansoloyt1300

7 ай бұрын

I ordered one 8 days ago, and it has already shipped, so hopefully his has too.

The thing I'm finding out about elegoo with having SLA/FDM printers myself is the company is just awesome in general.

Mine came in Saturday. Liking it so far.

@StrongBarnes90

3 ай бұрын

4 Months have passed for you now, I have an X1C and I want bigger prints. I have heard some bad things about this unit, is there anything I should be concerned about? I'm looking to print Nylon and CF-Nylon just as an FYI

@elricevan

3 ай бұрын

Personally was having issues using orca slicer, the profile I had set up reset itself. And it didn’t have the best quality. Then I used the elegoo version of cura the printer has on its thumb drive and my prints have been coming out pretty nice. I’ve only used pla with it for now. For other materials I’ve been using my x1c. For a giant bed slinger it’s not bad. First layer offset has been my biggest issue, I usually need to mess with z-offset on first layer every time, bit annoying. The x1c has spoiled me.

@StrongBarnes90

3 ай бұрын

@@elricevan Yeah I really want a large format that performs like the X1C I just don't have the time to constantly fiddle with the printer I just want my prints and wanna build my projects lol. I have heard a ton of bad stuff about this thing and I can't seem to find any large format that fits the bill right now. Hopefully one day Bambu gives us something

i occasionally get that z-offset glitch on my neptune 3 max... i noticed i get it when i print via usb directly from cura, and then print something with the micro SD card... when i go back to cura, the z-offset is either super high, or very low... it's so strange... i've asked several groups, but no one else gets this "glitch"... i'll level it again, and i know the number i use for my z-offset, i have it written down on a post it on my monitor... and then i'll adjust it again, start to print, and it's wrong... super strange...

thank you for that great video. i want to try the orca slicer. thank you for the recommendation. i got the neptune 3 plus from your recommendation and am very happywith it.

Galaxy Black filament looks so damn cool! These Elegoo printers look great too. Still waiting to put my Neptune 4 Pro together.

I haven't been able to find an answer, is there a major difference, aside from the size, for the EN4Max and the EN4Pro? I really want the Pro, but it would be nice for larger prints on the Max. I am trying to replace my EN2S that got flooded.

Offset changing like that is usually due to bad v-wheels. Try swapping them out for Triangle Labs v-wheels, they usually provide a much better experience on any v-wheel printer.

@boulderdash555

8 ай бұрын

It is actually due to Interpolate setting set to True and stealthchop set to 999999 in 26 firmware. 43 has some stuff addressed, but not fully.

@Geoff_W

8 ай бұрын

@@boulderdash555 how would that cause the offset to change in the way he describes? From what he said is happening, it SOUNDS more like the bearings in the wheels have come loose from the POM tires and are creating inconsistent movement...at least from what he said of the issue he's experiencing.

@boulderdash555

8 ай бұрын

@@Geoff_W it also can be a contributing factor, ELEGOOs klipper settings are not great.

I'm really impressed with my Neptune 3 pro, cant go wrong with it for a beginner!!!

I've had mine for a about 2 weeks now. I'm enjoying it so far but it does have some quirks I hope get sorted through a firmware update. I've experienced the z offset issue you mentioned but it's very random. I've been printing out the large parts of the Robot Devil model from Droid Division over the past few days and the printer has been on the whole time, z offset was consistent til this morning when all of a sudden it needed to be adjusted up by .08. The size of the bed makes it very prone to big movements from temperature change so like you I am glad it has the leveling wheels. The Elegoo Cura is a big turd, I wish they would just come with finely tuned profiles for the more popular slicers. The potential for this machine and what it can enable me to do are tremendous. This printer combined with the Creality K1 I picked up a week before this arrived have transformed me back into a maker instead of a 3D printer. Which is incredibly freeing to have such reliable tools.

@Andomosity

3 ай бұрын

How are you liking it 4 months later?

@PKM4STER

2 ай бұрын

What do you have to say about her today? Do you recommend buying it or any other model?

When you set up the printer did you set the Z offset first then do the manual bed level then the bed mesh? I was having the same issue with my 4 pro up until recently and thats what I did to fix the issue. Also Ive been getting the same banding on other filaments particularly silks and some PETG I notice it on brighter colors. not sure if its a fluctuation of heat or what.

This was a large 3D printer. The Orange Storm Giga is about to make this thing look like a tiny toy. 😮

@TylerGotAYTAccount

8 ай бұрын

Yeah got that email today. Wonder what the kickstarter price point will be.

@mlosuno402

8 ай бұрын

I’ve heard rumors of $1400ish but that seems low considering the price of similarly-sized TronXY printers. I’d bet closer to $2000-2500?

@somebodysomewhere3839

8 ай бұрын

On their recent video they say in the description that it will be starting at just 1250$

I keep getting layer shifts on mine. I updated the firmware, tightened the belts, switched to Orca, and it still gives me giant layer shifts.

I love seeing all the things i no longer have to deal with ... Your issues with Z offset tweaking with each print, powering off the printer between prints, stringing... So much stuff i dont have to deal with since getting my "other" printer. When i saw that klipper screen and heard you needed to add gcide to get the end stops to work, i shuddered with PTSD from those days.

Im glad I’m not the only one why has been having major issues with the tree supports in Elegoos version of cura.

It's been awhile since I've printed silk , but I think the extrusion rate might need to be lowered and it might be a good idea to tinker with a temp tower

I have the same z axis problem for my Ender 3 S1 Pro. It started when I started to use Cura 5.4, somehow part of the gcode that would take the auto bed leveling and apply it to my new print went missing so I had to put that back in. Not sure if that is related to your issue

Where can I find your settings for this printer, specifically large prints? I'm running into a lot of warping on my poster high speed prints and can't seem to figure it out

Great video. :) I am disappointed with the nozzle. i was thinking about picking this up with a diamond nozzle but at this point it has changed my mind on purchasing the printer. maybe after a short time it would have one of those nozzles available but i am not confident that will happen anytime soon. with this video it has greatly helped me not make a mistake on getting a printer for cheap but not with the things i would want or need. Keep up the great work. :)

do you have a video about your support setting and do you have some setting for orca aka bambu lab? I seen your short where you just pull the supports off that magneto helmet

Yes. The dual and tri color filaments will cause those lines when they twist.

I also have this printer. Been having the same issue with the Z offset, and a myriad of other issues. The Z offset issue actually scratched up my print surface real bad, and I had to buy a replacement. This machine with that issue and the complete lack of profiles or info to make your own is truly not ready for release. The amount of hours and filament I have wasted to tune it, only to realize that no matter how well I tune it, I still have to be there to manually adjust the bed and Z offset at the start of every print, and if I’m not fast enough then I have to cancel the print and start over. I’m really disappointed. The hardware seems good, but this shouldn’t have been released, it’s half baked at best and a huge headache. I want it to get fixed, I want it to get good, but I’d suggest to others that it’s not ready yet so maybe hold out on buying until you hear these teething issues are fixed.

@PERFECTDARK10

8 ай бұрын

Thank your for this feedback

@MrDixonSyder

5 ай бұрын

Have they fixed this with a firmware update?

@seaofcuriosity

4 ай бұрын

Is it ok to buy plus or max now ?

@MrDixonSyder

4 ай бұрын

@@seaofcuriosity I have been running mine for a week now and the prints are nice.

@seaofcuriosity

4 ай бұрын

@@MrDixonSyder this will be my first printer ever. So i want to be sure. Many reviewers are having all sorts of strange problems.

I have this, been printing helmets with it. It's a beast!

@dralex4121

23 күн бұрын

Would you recommend it for beginners? Looking to print helmets as well

@drgta6

23 күн бұрын

@@dralex4121 If you can afford it, go for it. I've printed a lot of helmets and body armor panels and whatnot. This printer can print huge items.

I wish Elegoo would explore upgrading existing models. I would love to be able to upgrade my Neptune X.

15:29 I'd love to hear any updates on fixes for the Z offset issue. Seems pretty annoying.

Can't wait to see what you will do with the Orange GigaStorm

@UncleJessy

8 ай бұрын

Clearing some space for it ;)

@StumblingBumblingIdiot

8 ай бұрын

@@UncleJessy Will be awesome to see! Only thing that disappoints me is how slow it is. I was hoping with a HUGE printer they would get the speed even higher especially with corexy. Wonder if they will have adjustment wheels 😑

If you do the got to home command on the tablet , load filament on the prepare screen , squeeze out one run wipe of the nozzle by razing Z to clean snot off then run Print ,The Input Shaping on these is Crazy smart .before i put a 8 kg square outdoor tile on my PC bench we were rocking an rollin with NO tile and print perfect ,i cant really say that the heavy tile helped the A.I Anti wobble seemed to not care about motion sickness LOL and was no difference in print quality wether its bolted down or going of on its own like some sort of crazy machine trying to change the world , one of the smartest things i heard on a 3D Printing channel was use one of those receipts you get say from the $$$ store in America there really thin 0.6- 0.7 mm .these Elegoo printers want a fair amount of squish in the purge line before you start to print isn't like two flat lines overlaying each each length ways Re - Z an bed level other wise bad things are going to happen i Know some of the so Called better printers are closed in ,but in fact cooling the print rather then slow cooling the print in an enclosure isn't really achieving anything but adding to EXTRA cost of your printer , its my belief that the more expensive printers arent really giving you anything extra than say a dust shield and really Custom spot on printer CFG .with that said id rather save my self 600 + odd dollars and spend it on filament and use one roll tinkering with the settings and be 15 rolls or so in front of someone who bought the $1200 printer its embarrassing really i think Elegoo is Like Toyota the went they saw they conquered in small iterations and came up with the best Quality Printer for the Price and still looking at the rich kid saying Bet you Pink slips i can beat you .

im buying a 3d printer soon as was wondering, do you have to build it yourself after buying it? or do they come prebuilt?

Where can we get the updated firmware? My 4 max is absolutely needing it but no idea how to get it and put it on this printer.

Great video! Which firmware version are you using on your machine? Also, would you be willing to share your Orca Slicer settings for the N4 Max, please?

@ThatLostGamer

8 ай бұрын

I 2nd this

For anyone wondering: maximum quality print / resolution / layer height for the Neptune 4 max in the Elegoo Cura software is 0.12mm. Profiles are 0.12 High quality, 0.16 Normal Quality, 0.20 has 3 profiles: Fine Quality, Fine strength and Fine fast, 0.24 Medium Quality and finally 0.28 Draft Quality.

in order to level small portions of the bed, try putting notecards or small slips of paper (obviously smaller is better) between the build plate and the magnet where you have low spots.

@redwraith6576

8 ай бұрын

try using aluminium foil folded. transfers the heat better.

That looks like the sv06 plus nozzle.... I think I saw some where that someone identified that nozzle as a nozzle specific to another Creality printer (K1 maybe?), but that might be wrong. Anyway, would be interested to see if it's actually the same as the Sovol.

I'm using your Patron profile for this printer and also getting a lot of stringing so any updates / advice would be appreciated. Excellent video and printer (so far!)

Does this have bigger x and y steppers? My neptune 3 will not print higher than 125 mm/sec. higher than that I get stepper skips. I would like to be printing in the 200ish mm /sec.

How do you set up Orca to include the N4M? I did not see the option in the printer menu for the N4M.

If you have to choose between the k1 max and the neptune 4 pro or max. What will be your option to buy ??

@UncleJessy please help. My EN4M has so many issues when trying to print at 300mms+ using Rapid PLA+ do you have a Detailed tutorial of settings needed to set up and run it on orcaslicer?

I was thinking about getting a printer and really enjoyed the video. I was wondering if you had any videos on using or how to use the programs you mention in the video.

Hi Uncle Jessy. Great video as usual. I finally received my elevo Neptune 4 plus printer this morning and to my great surprise one of the brass nuts (endless threaded bars for Z axis) is loose. The 2 screws that hold it are barely tight and therefore leave some play. On the other hand, they will be perfect. Is this normal? did you have the same thing on yours? Thank you for your help and see you soon. Victor😅

How does Neptune 4 plus compare to bamboo p1p for helmet prints speed wise?? I'm having a hard time deciding which one to get

I feel so much better reading these comments. I thought I was the only one struggling with my 4 max. I messed up my print surface as well. Ive run into multiple issues and im only 1 month into my 3d printing gig with now 3 printers on my farm. My elegoo neptune 3 plus is my workhorse, my ender s1 pro is a dud along with my 4 max. I refuse to give up on the max. If any of you could reach out with help on this firmware or patch I'd really appreciate it

Challenge: Take a shot every time Uncle Jessy says "run off and print" 🥴

I am still setting up my new Neptune 4 Max printer but I also have been watching various videos such as yours. When I ordered the printer I also ordered Multi-Sizes Nozzles for Neptune 4PLUS/4MAX which you had mentioned in your video. I am wondering if you would be willing to do another video talking about the advantages and disadvantages when using the different sized nozzles?

@KaitoKaze

18 күн бұрын

basically smaller nozzles much more detail, but take much more time to print, bigger nozzle faster print, smaller detail, but depending on what you want to print like simple shape, doesn't benefit smaller nozzle, it safe a lot of time print bigger thing using big nozzle

Like the old Anycubic Chiron (400x400x450), I look at these large scale bedslingers and really, really want to turn these into voron, vzbot, etc. But would it be cheaper just to build completely from scratch or mod these? The main reason for swapping into a Core would be resonance frequencies changing as more material is added to the bed. Slinging your product instead of your tool head invites problems.

I’m fairly new to 3d printing. I’ve been using the Bambu x1c but really want to get into a much larger build volume for work. Would I have a rough time with this big guy?

hey! Great video, totally convinced me to get one of these. Where can I find that galaxy black filament? I haven't been able to find anyone selling it.

That helmet is sick !

you should make some merch and put "run off and print" on a t-shirt... I'd buy one 😁

@josephmunson3945

7 ай бұрын

Hahaha 😂 yes

What slicer does this printer come with? I'm looking for new printer with 1.75mm filiment I'm done with creality stuff

Dude, I've been trying to get a good 3-d printer for years, but the really good ones were always too out of my range. I know what I'm asking my wife for Christmas 😂

I just boughtthis printer and I want to print a helmet what is the best setting for a Marrok Helet that is in 6 pieces? By the way all six pieces will fit the build plate at once.

So just a counter to the “mystery” $1200 printer: 1.) it’s sibling can be bought for much less with pretty much the same performance and 2.) Elegoo’s biggest problem is in their eagerness to release new machines, they tend to forget the printers that have come before them. Firmware updates, upgrades etc? Forget about it. If you want that you’ll need to buy their new machine. Make no mistake, elegoo can make some impressive machines, I was blown away by their Neptune 3. Less blown away by them dumping the product like a hot coal 3 months after release so they could support the Neptune 3 Pro. It’s something they have to really work on in my opinion. That said, I still think bang for buck, considering size, this printer is hard to beat. Just please support them better Elegoo!

You called out same the issues I’ve had with mine. I’m liking the machine but really want to switch over to Orca. After living with Bambu Studio for the last year Cura just feels like a step backwards.

Thanks, Jesse! Had my eye on this printer for a bit. One thing I haven't been able to find is how much room front and back is needed for full extent bed movement... Base dimensions are available but not actual required useable space... Can you help out?

@leeball4

8 ай бұрын

Just measured my 4 Max, the full sweep of the bed is 37 inches full back to full forward. It's 27.5 inches wide and 30 inches tall without the spool holder, I've got it on the bottom shelf of a 48" x 24" shelving unit and had to put a 2x4 on the floor in front of it to give it enough room to move. It's a beast.

@sjmaguirepdx

8 ай бұрын

@@leeball4 THANKS!!!

Oh, I just fixed that z offset issue on klipper. My start_print macro was setting z offset to zero. Check your macros, maybe that's what's causing your issue

Are there CHT nozzles for these already ? Also could you not print faster with CHTs instead of normal nozzles ?

Considering I could barely afford to buy my used Ender 3 v2 for $120, $470 is definitely not what I’d consider affordable. But I’d definitely love one with that big bed.

I have this and use Orcaslicer but, can't get settings for bigger layer heights. Using a .8mm nozzle and can't get than .28mm. Help?

@Impuritan1

3 ай бұрын

I’m still new to Orca, but when you set up your printer profile did you make sure to set it to that nozzle size?

I would like to print CF materails like NylonX, is this nozzle replacable with steel nozzle to print such CF filaments ?

Mine was printing, Max 4, well and then when I hit the home button, it does its thing then goes to center and goes down into the print bed, grinding. Any clues anyone out there?

My Neptune 4 Max is working really well now.

Would you mind sharing the printing settings for the helmet made of elegoo galaxy black pla?

how did you manage to get 1 inch + stringing retract on both settings ✅

Thanks for this. I'm debating on getting a new, new printer since my Chiron is a mess at the moment and I have to catch up on printing for dragoncon 2024.

I bought the Galaxy Black from Elegoo based on your recommendation in the last video (or maybe it was the one before that). Anyway, I agree. It's very awesome. I am very much wanting to get this printer for my next printer. Unless I buy another X1-Carbon.

@UncleJessy

8 ай бұрын

I just bought 5 more rolls tonight 😂 everythjg just looks stunning on it

@cluna92377

8 ай бұрын

Where can I get the galaxy black? I looked on their website and I don’t see it there and I couldn’t find it on Amazon either. Does anybody have a link I’d like to order a few rolls of it.

@UncleJessy

8 ай бұрын

@@cluna92377 it looks like it’s out of stock at the moment on Amazon www.amazon.com/dp/B0CB4935HJ/ref=cm_sw_r_as_gl_api_gl_i_X03W00DWMGWWE8SYDFF9?linkCode=ml2&tag=uncle05-20

Help! I have one and now I have really odd software issue and can't even use my new printer any help would be appreciated

Everything looks so smooth, and layer lines are non-existent, what are your settings in orca? Please. Awesome Video!!!

How loud is it if you are printing without the turbo fans?

I have this printer on its way. So to prepare, i have been playing with Orcaslicer. The print times are really long so far, how can i speed them up?

I am having a problem of my prints not staying on the bed. Any ideas. I have tried leveling several times. Tried hair spray etc.

@yostaustin

4 ай бұрын

What was the solution here ? I'm having similar issues.

I want that dinosaur skeleton model!

Try adding M420 S1 at the start at the print to load the bed leveling mesh.

Will be awesome also an orca slicer profile for N4 Pro ❤❤❤❤

I suggest a dryer box for your filament. A dual one is my suggestion. I got mine from Amazon I think.

How does this compare to the Mingda Magician Max2 which is what I got.

I got the Neptune 4 Max, but is is very buggy on the Z axis. I need to wait for a firmware update.

At this size and price point I almost have to buy one 😊

Wish the cr10-smart had the bed leveling wheels… but that’s why I bought the Neptune

That Magneto helmet is awesome! I have the “other” printer you talk about. After having a couple different brands that I always had to tinker with I have had such a small amount of print fails with my Bambu. They have only been very small intricate prints and generally it is a first layer issue or fails very early. I still would like a larger print volume sometimes than 256 Cubed. 😁

@UncleJessy

8 ай бұрын

Yeah what I’m loving is there are so many options now based on people’s budgets & needs!

awesome sauce!!

Very cool and thanks for the video. I've been waiting for weeks to see it. I'm curious, how does it print with other materials? Can it print in the Elegoo PLA + at speed? Or PETG? I'd love to reprint a few R2-D2 parts with it and print other droids...

@UncleJessy

8 ай бұрын

Yeah I’m going to be throwing down some other materials on it here in the next week or two. Including some flexible marwrials

@chrishechtl8330

8 ай бұрын

Cool! Can't wait to see how it goes. I just finished a life size bust of a Utah Raptor with feathers. (glued on) I wonder how fast the Neptune 4 could have printed it?@@UncleJessy