Part 2 - kzread.info/dash/bejne/p3aar9GIoabNgMY.html Part 3 - kzread.info/dash/bejne/Zp6fmM2TedrZgaQ.html Part 4 - kzread.info/dash/bejne/d4V-yKaFdbG_nrg.html Get this 3D printer for $189 with this affiliate link: bit.ly/3kcSKz0 and discount code: RP3ROMP10 ~~~~~ Here are some FAQs, updates, and disclaimers - 08/30/2020: ~~~~~ - I removed upgrade #9 - Lead screw stabilizer. Details in the video description. I'm sorry for including this one, I'm honestly a newbie at this and didn't know of the issues around this upgrade. thank you all for educating me on this and sharing resources with me. - Cost for all the upgrades (not including the raspberry pi): $138 Q: Why did you buy a 3D printer just to print upgrades?!? A: Because I'm a gooof.... and I just like to get the upgrades all over with at the start so afterwards I can focus on my projects and not have to worry about printing issues. In fact, just to make sure I don't get addicted to making upgrades, I'm forcing myself to make at least 2 videos that are non-upgrade related before I make the part 2 video for this. Q: When is part 2 coming? A: Sooooon-ish? I'm still waiting for a few upgrade parts to arrive in the mail and working on a few other projects at the moment so it'll take a while. I'll give updates in my next few videos. Q: What's your printing profile? Can you share it? A: I'm using Maker's Muse's profile from this video: kzread.info/dash/bejne/kYWGxJdtqrm2lrQ.html I'm also using that profile for PETG too with just modified temperature settings. Q: Why would you do this when the Ender 3 v2 and CR-6 SE already have a lot of these upgrades pre-installed? A: Because when I bought the Ender 3 Pro, the v2 and CR-6 SE hasn't been released yet :( I still really like the ender 3 pro but I would also highly recommend the Ender 3 v2 if you're looking to buy Associate link (cheapest): rb.gy/wwgxzx Amazon: amzn.to/2PFBCnM Q: Why the baby? A: Why not the baby? I'll add more as more questions come in. Cheers!

@printedpropscreations3017

3 жыл бұрын

12 to 4.6k in one video- that’s amazing!😂

@MichaelMacGyver

3 жыл бұрын

Replace the stock hot end fan with a Noctua, much quieter. Maybe a PiCam too so you can watch your print progress and do timelapses via OctoPrint. Also look at getting metal X and Y belt tensioners.

@AnIdiotwithaSubaru

3 жыл бұрын

If it makes you feel better, the amount of "upgrades" i have done only to realize that they were made by someone who didn't think it through and then need to remove it has been at least 10 times on my 2017 CR-10! ill often tell my girlfriend how i cant print a planter for her because this new upgrade is going to be a game changer and then later that day when she sees me throw the completed print away i usually have to explain! hahahah BTW, Linear rails on X and Y are huge too

@_wildsec

3 жыл бұрын

you gotta do more vids, really nice.

@xavierearnst6245

3 жыл бұрын

bruh you're already a high quality youtuber from the get-go. Enjoyed your vid alot as I am also upgrading my ender 3. currently printing chain links...

The joke "buy a 3d printer, print your own 3d printer, refund the bought printer" is getting more and more real.

@alwise8634

3 жыл бұрын

Prusa has always had printed parts.

@sidewinded1

3 жыл бұрын

@@alwise8634 I second this

@Freakmaster480

3 жыл бұрын

voron

@k23raj2

2 жыл бұрын

ha ha ha

@businassman

2 жыл бұрын

yeah, so great to print motors and microcircuits... metal parts, software, power unit, cabels, oh wait

There's something SO satisfying about the fact you're 3D printing parts for your 3D printer

@leeming1443

3 жыл бұрын

tea, like Prusa

@RustyShackleford420

3 жыл бұрын

Its like building a lathe, you use the lathe to build the parts to finish itself.

@honquewastaken2298

3 жыл бұрын

3D PRINT A 3D PRINTER REEEEEEE

@winthardcastle

3 жыл бұрын

What else would you use a 3D printer for?

@honquewastaken2298

3 жыл бұрын

@@winthardcastle YE

You probably don't check this anymore, but I just got my Ender 3 Pro and it's birthday is also 4/28, just 2023. Kind of neat.

@TheRaccoonFPV

Ай бұрын

Mine is 4/28 2024

This has got to be the most well put together, clean video I've seen on upgrades. This was SUPER helpful.

"shouldn't we fix this design issue?" "no, the user will use our product to fix the design issue"

@sakurito55

3 жыл бұрын

3d printing in a nutshell they give us the parts we do the rest 😂😂 but seriously is amazing how we can improve everything in this machines

@PunakiviAddikti

3 жыл бұрын

Yeah, it's truly amazing how 3D printers are essentially self-upgrading.

@iShaltSmiteThee

3 жыл бұрын

This made me laugh aaaand it's five am

@beerenmusli8220

3 жыл бұрын

Thats the beauty of Open Source!!

@hulkdynamite3305

3 жыл бұрын

Off line games nowa days^

I really love the way you edit, your videos just flow like a superfluid

@davidedemetz7838

3 жыл бұрын

oh my a wild integza

@Cambpictures

3 жыл бұрын

Thank you for showing me this guy

@QWERTY-ob6fi

3 жыл бұрын

Gotcha integza

@wiwekiboi2424

3 жыл бұрын

One of the best 3D printing videos I've seen thanks Integza for the recommendation well appointed!

@mateiciobanu4670

3 жыл бұрын

i have tomatoes

Your editing and sound design are next level. like at 5:11 when the tools appearing in the drawers each make unique appropriate sounds, loved it.

It’s really awesome to see these machines working, it’s like creating matter out of thin air, I love 3D printing

How did I not see you before? Your editing, jokes and overall explanations are so well done! Hope to see more of you dude!

@ScottYuJan

3 жыл бұрын

haha thank you so much!

@EBJ0

3 жыл бұрын

Agreed!

@ChrisT-ib1zh

3 жыл бұрын

Because it is his first 3d printing video.. Anyway, very good. Hope to see more from him.

@sy5tem

3 жыл бұрын

exactly i went an looked if he had other video. just 3 total. his video are instructional but are just plainly entertaining! he must be doing video professionally in life . man you make more video about anything lol

@EssenceRare

3 жыл бұрын

Yeah great show. Someone recently recommended you

I've never said this in the tens of thousands of videos I've watched on KZread, but this guy's editing is CLEANNNN. Thoroughly impressed and enjoyed it greatly, as well as really really good content. Well done!

@itromacoder3088

2 жыл бұрын

He's a god honestly if i could i would but 10 likes lol

Very helpful beginners guide to what to get started with! Just got my Ender 3 Pro 2 days ago and ready to print out most of these items, thanks again!

Thanks for the video! I'm getting an Ender 3 pro to tinker with, and your mod video is great. So well documented that it will make life a lot easier for a total 3D newbie like me to get started. Excellent editing of the video too!

Edits and music and appearance are all just so smooooooooth. This is why me and everyone else keep rewatching it.

@trashlambo

2 жыл бұрын

Much as I like the music, it is a bit loud, truth be told. Could be lower, and I'm sure others will agree. Very well done otherwise

Watched this video over 10 times by now, so much better quality then the average youtuber with way more subs. Also very straight to the point.

@ScottYuJan

3 жыл бұрын

thank you. really glad you enjoyed it so much! cheers

@cody_13

3 жыл бұрын

@@ScottYuJan could I send you mine and you do all this for me?! I’ll pay! Lol.

Ive watched probally 4000 hours or more on utube and other places and have to say this was one of the best tutorials ive seen yet. And now have to figure out the chain cable and the knobs...those look cool .all the colors really make this pop!!! This should have been an option at the start and bet they would have sold more....thanks again man....

I LOVE that you basically made your Ender your own colour scheme; I saved this video for later so that I can do the same thing! The Raspberry Pi goes a bit over my head, but that may be an upgrade for much later. Great video :)

@sundayfunday5059

8 ай бұрын

The way he did it is more clean and compact, but if you don’t care about looks you can pretty much just plug it in after installing software and use it.

This is the best 3d printing video I've seen since I've gotten my ender 3

@ScottYuJan

3 жыл бұрын

wow thank you. i appreciate that!

@willcrockett6707

3 жыл бұрын

I agree 100%.

@Kant1_

3 жыл бұрын

Totaly agree !! Simple. Clear. Perfect !

3D printer upgrades is one part ,but your video editing skills are "God Level"

The way you see the problems and idea creation is just awesome.

Great video. Thank you for compilation of good practical upgrades. Just got my Ender 3 Pro from Microcenter for $99. After seeing this video, I am super excited to start moding.

Everybody talking about how he added LED lights and it's going to be as bright as the screen, not noticing the switch he installed that lets him turn them off while the unit is still running.

@beerenmusli8220

3 жыл бұрын

YES, YES THIS.

@BeardyBaldyBob

3 жыл бұрын

Hmm, could he not have wired a wee relay up to the pi so he could turn the lights on and off remotely when he needs to check on a print over the web?

@jlee7811

3 жыл бұрын

@@BeardyBaldyBob Maybe, but my point is that everybody seems to think that the LEDs will bother him while he tries to sleep, when all he needs to do is go turn them off, and the printer will still run.

@tricky4g63

3 жыл бұрын

@@jlee7811 exactly bro!!! There is a big difference between a light you can control vs a light that's on the entire time of use. Some people's kids man!!🤣🤣

@B3DPrinting

3 жыл бұрын

Does turning the led off or on while printing cause any print shifts from spikes?

I don't even own a 3D printer but his content is just that interesting

@smartronics4284

3 жыл бұрын

get one...NOW

@PunakiviAddikti

3 жыл бұрын

You should consider getting one. *Do not cheap out or you'll get buyers remorse!* Get the Ender 3 pro. It's the best for the price and worth it.

@smartronics4284

3 жыл бұрын

@@PunakiviAddikti I got the Ender 3 Pro too. It‘s the best open source printer and you can upgrade it to hell

@QJHKI

3 жыл бұрын

@@smartronics4284 why do you need to get a 3d printer? I found this video in my suggestion btw

@sidewinded1

3 жыл бұрын

@@smartronics4284 Arguably prusa is the best open source printer. However I would put ender as the best budget printer easily

Love how you edit. Also how you put work into it even when you didn’t have many subs

Dude your editing is SO good! The way you matched the timing at 5:12 to the music was 👌👌

i like the edits bro

@PlanetComputer

3 жыл бұрын

;'

@Robstrap

3 жыл бұрын

u mean cutting every 3 seconds

Your editing is just simply amazing. After watching an unimaginable amount of 3d printer videos yours takes the cake. By far.

This is wonderful. I just got a 3 Pro for Christmas so I'm really looking forward to modding/upgrading. Thank you for this.

gawd... ty for going over all your upgrades... so satisfying to watch.

Your Ender is so upgraded it has gained sentience and will try to destroy mankind.

For anyone who installs a BL Touch some newer Ender 3's come with the non-silent new motherboard V4.2.2 .Meaning you dont have to use a boot-loader for the firmware.Also,there is a dedicated BL Touch connector

I only meant to save your video to watch it later, but the flow of your edits and great choice/volume level of your music drew me in and before I knew it I finished the video. Thank you for not only making this video, but doing it so damn well.

24 mods in 13 mins, speed running content.

@ScottYuJan

3 жыл бұрын

100% what i was trying to do haha glad someone noticed

@LarryAngama

3 жыл бұрын

much content less time :) this are detailled enough + link to content

@michaelcogswell8640

3 жыл бұрын

im just starting to research these 3d printers and want to get into it cause i love making and crafting things and tbh it seems like a dang good freelance opportunity and seeing this video on how 3d printers can be upgraded which i did not know makes me want to get a ender 3 as my first printer very soon

@josephgrn2818

3 жыл бұрын

How much did you spend in total on all these mods? I a thinking of getting a printer now too.

@suppressor6372

3 жыл бұрын

@@josephgrn2818 Don't know if you found the answer all ready, but he says in his comment to this video "- Cost for all the upgrades (not including the raspberry pi): $138"

This is lovely. Your editing is well done and your humor is funny without derailing the video from your topic. This is a wonderful balance of entertainment and enlightenment. Good job

This is amazing, really enjoyed it. :) Picked up a used stock Ender 3 today, and this is absolutely perfect! Can't wait to get started!

Dude, your editing is superb. Thank you for this video!

I just found this channel today. It has a production level I normally see from creators with 200-300K subs. I was shocked to see only 3 videos on the channel.

Thank you for putting all the links for the people that acually will print these. Also, I could tell that you put a lot of time into your videos and keep the good quality up!

AWESOME VIDEO!!! Well produced and as entertaining as it was informative. So glad I found this! THANK YOU! Can’t wait to print all this stuff! (Especially that snack holder!) Love your presentation style and really enjoyed the humor. You have a new subscriber!

Wow…….fab. Loved the upgrades. Keep it coming!

The time spent making this video must have been insane. This editing is amazing

That was awesome...

@GameThrillers

3 жыл бұрын

Probably one of the only other Fortnite players I would catch watching a 3D printer video. Haha nice bro!!

@rogg0224

3 жыл бұрын

Fortnite is cringe

Hey I would actually like to thank you for showing me 3d printing and a good starter 3d printer, this video first got me into 3d printing and I have started modding my printer in the same way. Thank you Man for your work.

clever ideas are always welcome and refreshing. thanks a lot, a place where to learn more and get inspired.

I'm in the market for a new printer and I've watched multiple vids for ender mods and THIS video compiled ALL the best mods, while keeping the video short, and adding some dope music. You get my respect, my subscribe, and I'm gonna get this printer now. update: order placed, printer, mod 19, 21, & 22 on the way update 2: I got the 3d touch, which is a knockoff of the way better BL touch. DO NOT BUY THE 3D TOUCH. The measurements it takes are so inaccurate that parts of your bed will be too high while other parts are too low, so it's basically useless. The BL touch is a bit more expensive, but worth it!

@ScottYuJan

3 жыл бұрын

Rawjaat that’s awesome man! so glad i was able to help. have fun with the printer and good luck!

@DrShwifty

3 жыл бұрын

@@ScottYuJan I reallllly want to upgrade to the BL touch, but am not too savvy with changing software settings, i dont wanna brick my printer, alot of the videos arent real clear, or they skip some steps. Any advice?

@Apoth3otic

3 жыл бұрын

@@ScottYuJan I Second Jame's question. Do you have any advice for setting up the BLtouch?

@rawjaat

3 жыл бұрын

@@DrShwifty I just set this up a few days ago. If you have the skr mini, the bltouch should work without requiring any change to the firmware as long as you replace the z-stop with the bl touch. One problem will be that when manually homing the z axis, you might not be able to go low enough, so that would require some firmware edits. github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.2 They show how it needs to be plugged into the board on this github page. If you want to change firmware settings, you'll have to install visual studio code and I found a few good videos that guided me in the process of editing, compiling, and loading the new settings to the printer. If you want specifics message me, but I'll try and link the most helpful videos. Edit: I just remembered it's not 100% plug and play for the bl touch, you just have to flash the firmware that's on bigtreetech's GitHub. No coding required, just upload to micro SD, plug in ender, and turn ender on.

@rawjaat

3 жыл бұрын

@@Apoth3otic kzread.info/dash/bejne/g5h80sZudda5lbA.html Follow this guy's guide to set it up and it'll work perfectly, unless you get the problem where you can't lower past the z-axis zero point, which means you need to change the firmware settings. If you need to change anything in the firmware then follow this guide to install the required editing program kzread.info/dash/bejne/f56c0sGJXbzgppM.html IMPORTANT STEP if you get the skr mini board Scott recommended, then download the Marlin that the board is currently running instead of the official marlin that the above video suggested, which can be found on github here github.com/bigtreetech/BIGTREETECH-SKR-mini-E3 in the firmware folder > v1.2 > Marlin-2.0.x-SKR-Mini-E3-V1.2. You'll have to download everything, and then go to that specific folder in the package. Once you build the firmware with your edits, the new "firmware.bin" file will be in "Marlin-2.0.x-SKR-Mini-E3-V1.2 > .pio > build > STM32F103RC_btt_512K" Put that file on the micro sd, plug it into the printer and then turn it on, and then once you see the start up screen then it should be ready to go ALMOST FORGOT: You'll probably get an error when trying to compile. That's because you have to change something in the "platformio.ini" file. Go here github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/302 And mIRACLELive1 mentions that you have to change it from "platform = ststm32" to "platform = ststm32@

Great stuff man, only had my ender 3 for a month now but definitely will be doing some of these mods! appreciate the time you put into organizing all the links and stuff in the description as well :D

Good editing. This video was insanely clean. That’s a sub.

I just got an ender for Christmas so you gave me some really cool ideas to work with while learning how to use it! Thanks!

Outstanding work there young man! I like your attention to detail and appreciate the high production quality of your video. Thank you very much for these terrific ideas. As an old retired engineer, who is also a newbie when it comes to 3-D printing, you have taught me a lot sir. Much appreciated sir.

Very informative! Great video for me who just got myself an Ender 3 Pro. This channel is gonna grow alot ~

@balls7809

3 жыл бұрын

aYy

@hulavux8145

3 жыл бұрын

Regarding the part he use cover for noise reduction, Can I ask what function does those holes serve?

@obe22099

3 жыл бұрын

This is pure magic, i was not prepared. Imagine your car turning emissions into car upgrades...my mind is blown.

@LigerSupremacy

3 жыл бұрын

@@hulavux8145 They are for the screws to attach to the PSU.

@JasonEllingsworth

3 жыл бұрын

@@obe22099 heh well you could get a turbocharger to kind of do that :)

Love your video, Scott. Keeping doing it, I will expect it desperately.

This is the best video I've seen for getting started with 3D printing.

That was a REALLY good video. Please continue

@Scott_C

3 жыл бұрын

Yeah all quality no fluff. Will need to re-watch.

that rhythm at 5:11 was sooo satisfying - I appreciate the work you put in to add that small detail that really improves the feel of the video :). Like someone else said in the comments, this channel is destined to blow up fast

@ScottYuJan

3 жыл бұрын

the extra effort needed to put in those small details is completely worth it when people like you notice :) haha thanks dae

Your editing is absolutely on point!!! Immediately subscribed

This is beautiful. I have watched it 500 times now.

"Why? Not sure." Answer accepted.

Dude, your voice isnt annoying, youre straightforward and everything. Nice

Fantastic video. I just got my first 3D printer (Ender 3 V2). I haven't even unboxed it yet, but I can see me doing a lot of these mods that are suitable for my version. I'm a black and red colour scheme fan as well. So this is all perfect. Amazing editing work as well.

Dude, thank you. Just thank you. Amazing effort put into this. Wow.

You've got some serious editing skills. Fantastic video! Also the printer stuff that I came here for was pretty great too. I too love to mod everything I buy and absolutely need a 3d printer.

I really do not know why but, I keep watching this video over and over again!

@ScottYuJan

3 жыл бұрын

thanks man! haha i’m glad you enjoy it :)

@kostasdrakakis8386

3 жыл бұрын

@@ScottYuJan Did you actually hide ,those gums and that chip in that electrical box?

@sidewinded1

3 жыл бұрын

@@kostasdrakakis8386 I need answers

Thanks! This is amazing. You've helped me immensely with my Ender!

This is great! I did not expect such production quality for a video on 3D printers.

you are really good at entertaining other people with things we've never seen before well done

You've only uploaded 3 videos, but each one feels like so much time and effort was put in, and they all flow amazingly well. You're an extremely talented (content) creator! Hope to see more stuff you make in the future!

@ScottYuJan

3 жыл бұрын

thank you so much! i do really enjoy making videos too so stay tuned! I’ll definitely be making more :)

@hydrodrip7038

3 жыл бұрын

@@ScottYuJan can you put a link to the filament you used in this video (bright orange) thanks!

Very nice job Scott. Bought the Anycubic Vyper which has allot in common with the Ender 3 v2 but it comes with lots of upgrades out of the box and is easier to install. Had some problems with the slicer software not starting on windows 10 and Chinese software drivers at start but it is ok now. Ultima Cura 5.2 solves this issue. Print quality is good as long the PLA feed goes smooth and the nozzle is kept clean.

I am watching all ur video right now, there are so well done, good job bro, this is so awesome and beautiful, I don't have the words, thank you

this is the quality content I am looking for. 👍👍

Good work bro! :)

@Hehhehemegaprog

3 жыл бұрын

U r yu tu br

@zortraxtheprotogen881

3 жыл бұрын

O Hej Jarek

Awesome video man!!! You did a great job on the editing, music, everything is top notch. I found this video very informative. Much love from Calgary eh!

1st time viewer, sold me on the cable chain. actually sold me on it all thanks man. Subbed and liked!

This was a very well done video, I wasn't expecting much from a simple upgrade video but I'm impressed. Now I gotta print all of these things now lol.

@Shorts-GO-GO

2 жыл бұрын

kzread.info/dron/W2ja1uLvqjs9mzjVzkglVA.html

Fun how im back watching this video for the 4th time, and still don't own a Ender 3 Pro. Such a smooth video!

@necaton

3 жыл бұрын

go buy one

@cr0wbel

3 жыл бұрын

@@necaton I did :P

Dude that is impressive!!! Great job and great video!!! Thank you!

been doing lots of research and this is the best video yet.

Great Scott! Thanks, brother. My first printer is on its way and I feel confused on what to do first but this video helped me a lot. I appreciate the time and effort on this video as well.

@ScottYuJan

3 жыл бұрын

glad i was able to help. good luck with your first printer!

I watched this video and I have actually done almost all of these things. A few must-haves are octoprint, it is sooo much better than having to take an sd card out of your pc and putting it into your printer every time you want to print. Another must-have is the glass bed and the metal dual gear extruder thing. Also if anybody thinks that the time lapse thing is cool, I believe he is using a plugin in octoprint called octolapse.

While watching this, I thought that I should comment on your superb video production skills. Then I saw some of the comments and see that you did get some love! Magnificent job, Scott!

OMG This video convinced me to buy ender 3 then any other video on this platform. Amazing contents!!!

Loving these upgrades and I've done a load of similar or the same ones myself. Have to say though the best upgrade I got for my Ender 3 V2 was a 2nd Z motor and screw assembly. It stops gantry sag completely and really squares up your prints - noticeable on taller prints or when you really really need things to be perfectly square.

@lambdaman3228

2 жыл бұрын

What are you printing that really really needs to be square? What are you printing that is so tall and not looking good because of gantry sag?

This video was super cool to watch, the music and edits were sweet. Literally bought a ender 3 pro after watching this

@DontBeSynical

3 жыл бұрын

what mods have you done! is it good? do you recomend it?

@Gannon.

3 жыл бұрын

Sameeee

@sidewinded1

3 жыл бұрын

@@DontBeSynical If you have the means, buy a prusa. If you cant shellout the $1k or so however go ender, completely worth it

Just got this thing and can’t wait to make all this stuff!

Thats a great video! Thanks for putting all this together!

Mate, this video is QUALITY CONTENT! Also, great mods; will prob also try some!

I keep coming back to these videos. I love how you did the LEDs, Im just nervous about trying to replicate that styling with the wiring and such

@cam6532

2 жыл бұрын

I’d love to do this as well but I feel the same way. Then again there’s not much you could mess up

@Shorts-GO-GO

2 жыл бұрын

kzread.info/dron/W2ja1uLvqjs9mzjVzkglVA.html

Thank you for putting this together. I can't wait to do some of this to my ender.

I just bought an Ender 3 Pro yesterday. I had to pause just to shout out Vancouver. I grew up in Battle Ground. Excellent video and amazing editing.

12:13 Set these switches up to be run by the Pi using an onboard relay board. Then use PSU control or enclosure plugin in Octopi to turn them on/off automatically when you run a print.

@babubak

2 жыл бұрын

Can you detail a bit more how you did this? Excellent video having a hard time understand how you setup these switches.

@IcanCwhatUsay

2 жыл бұрын

@@babubak what are you talking about? This isn't my video. Do you want to know how to run the switches using a Pi or using toggle switches like shown in the video? If it's the former, just google psu control for octopi and you'll find your instructions. kzread.info/dash/bejne/YmGDzpiSpsmWlso.html

holy shit, I literally was on reddit and found ur vid and this is amazing!!! Great vid! I just order my first printer on saturday, an ender 3 v2. nice vid man

@ScottYuJan

3 жыл бұрын

thank you! these are honestly pretty great printers at this price range and the v2 looks sweet! I kinda wished I got that one honestly but when I bought mine they only had the pro in stock. Good luck with yours, hope you have as much fun as i'm having with them :)

@tiswasthe1

3 жыл бұрын

I just bought the Ender 3 v2 also

@andrzejbaranski5585

3 жыл бұрын

Good video ! :) i am waiting for Ender 6 se from Kickstarter, this will be awsome to :)

@badass5764

3 жыл бұрын

Hey guys I want to get into 3d printing, I have in mind the creality cr-10, is it a good choice or is better the ender 3 v2 u mentioned

@badass5764

3 жыл бұрын

My goal is to get the best printer in the 300-400 margin

love this video. lots of ideas when I can finish my printer

Your creativity is off the freaking charts!

Awesome video bro, I can see this one blowing up very soon 👍

@ScottYuJan

3 жыл бұрын

Wow, thank you man. I appreciate that. That would be awesome but i'm honestly pretty happy already with the response from the Ender 3 community so far haha

I’ve come back to this video like ten times just to watch the dude’s face at 4:30. Cracks me up every single time

This video was my guide. I've probably watched it 20 times. And like 4 weeks later it seems so basic. Thanks for getting me through the first wave. Now I'm editing firmware and have replaced 80% of this machine. Science.

Wow, dude. GREAT job! Excellent editing!

just got my ender 3 a few days ago, and am incredibly overwhelmed by all the info that i have to learn. this just made me even more overwhelmed but damn was this cool to watch!!!! love your editing style too!

@versesZero

2 жыл бұрын

Same! It’s gone from “printer works but I have some software tweaking and calibrating to do” to “well now I need to print a whole new printer”

@totallynotpaul6211

2 жыл бұрын

@@versesZero this whole video had, "if the handle on my axe breaks and I replace it, then the axe head breaks and I replace it, is it still the same axe?"

@and_I_am_Life_the_fixer_of_all

2 жыл бұрын

@@versesZero, hey, same here :/

@minifishy7162

2 жыл бұрын

@@and_I_am_Life_the_fixer_of_all mines coming in today. Any progress? I'm overwhelmed too lol

@17vmrivas

2 жыл бұрын

just ordered mine, im overwhelmed too! xD

Merci beaucoup pour cette vidéo ! Et merci surtout pour les liens des modifications ! Thank you very much for this video ! And thank you especially for the links of the modifications !

THANKYOU for this, pulled out my 3d printer after a move and a long house renovation and it needs some lovin', I'm pretty much going thorugh this list one by one

That walk outside in the beginning of the video had me rolling. I'm glad I watched this too, I've been contemplating which 3D printer is best for what I want to do.