Yes!! I did it! Blender is easier than I thought? Thank you so so much for this, I really appreciate it!

@richlasma

4 жыл бұрын

I'm glad you did it but nah bro it's giving me a headache right now, l'm trying to make a dress and oh boy.

@25games

4 жыл бұрын

I am glad that I was able to help you and that you think that Blender is easier than expected :)

@LpsYcats

4 жыл бұрын

@@richlasma Oh I'm sorry about that- God a dress much be hard-

@LpsYcats

4 жыл бұрын

@@richlasma Hope you got it by now- 💖

@LpsYcats

3 жыл бұрын

@Jerome Crosby These are scam comments! Do NOT use flixzone!!

whatever you vwuanna

@25games

4 жыл бұрын

too much slang? XD

@AlphAndroiD

4 жыл бұрын

good information, but this "wanna" killed me every time :D

@blackswan6386

4 жыл бұрын

its funny how to watch stupid kids spelling like stupid kids hahaha just dumb

@blackswan6386

3 жыл бұрын

@BIG e yeah so funny bruh

Dude! I started learning Blender specifically to 3D print an Inter-dimensional-Tentacle-Monster Lamp for my bathroom. An here you go making my insane lamp dreams possible!

Great tutorial! I was trying to figure out how to do a bundled object (like bundle fruit or bundled wheat) that would have various bulging deforms. This nails it!

Thank you for a clear easy to follow tutorial. Adjusting the circle resolution was the tip I was looking for.

This tutorial was a lifesaver. I have been re-learning 3D and this video solved this little niche problem i was running into. Thankyou so so so much!

THANK YOUUUU I was trying to find sooo many videos on how to lower the poly count and NOTHING. You are a LIFE SAVER

This tutorial was perfect ! Well explained and satisfying to watch. Thank you !

Thank you this is a basic skill that all modelers should know. Very helpful and straightforward.

Awesome video! Thank you so much for this tutorial :) You're making a huge difference in a lot of people's lives!

I browsed KZread for so many videos of how to create rails and pipes and similar objects, and only your video helped me to learn it the proper way. You certainly deserve more subscribers. Thak you 25games. I wish you may assist me to improve my developing abilities even more, in order that I can create and launch my very own video games for my business.

Thanks, straight to the point. Exactly what I was looking for doing a curved tree trunk. Liked and subscribed.

Concise and clear. Awesome job !!! thanks for sharing !!!

this is amazing, thank youso much for a very clear explanation! :>

your a life saver thank you i have been looking for a while now.

Awesome tutorial! Everything so simple and clear! You won a subscriber

tnx m8! very useful to create smooth curved surface!

Thanks! Everything is clear and concise!

Thank you. Finally I can make ropes and wires withour going crazy.

Thank you for the tutorial! Your work is greatly appreciated.

@25games

4 жыл бұрын

Thank you!

Simple and effective ! Thank you !

Sir this was beyond useful. Many many thanks!

Really really enjoyed and learned from this. Thank you much. y\You are percise and clearly spoken.

Thank you!Great lessons!

What a great work!

thanks a lot!! perfect for learning, I needed it!!

thank you this was really easy to understand!

I learned a lot. Thank you very much

Super thank you! this helped me alot! :D

Thank you for this I searched the internet for 4hours to find a way to unwrap it. thank you!!

Thank you for the fantastic tutorial, btw. =]

very informative and clearly explained.

very helpful tutorial, thanks

Thank you man this is exactluy what i was looking for! liked and subscribed! :D

@25games

4 жыл бұрын

Glad to hear that ! You are welcome!

Thanks a lot for this helpful video

I had problems with deleting objects after using they like geometry. Your video help me to solve this problem. Thank you so much!

very helpful! thank you :)

You are awesome. Thank u, really!!!!

...great tutorial...thanks a lot!!

Thank you!!

Thank you man!

Thanks for the info, I just started to play with this feature of blender recently to make neat hair. But I couldn't figure out how to lower the resolution of the vertical edge loops of the polygons. Helps a lot thanks.

I LOVE YOU THANNKYOU FOR THIS

Thank You So much ,God Bless You

Thanks again )))

This changed my life

@_-nyxx-_

3 жыл бұрын

yes

great video!

thank you a lot, it helped

Phew! At last, something on editing curves that doesn't wander off the point, which I can recommend to learners. Thanks.

@25games

3 жыл бұрын

Thats nice to hear! Are you some kind of a teacher as well? (you mentioned learners)

@rbettsx

3 жыл бұрын

@@25games I'm an ex stop-motion animator, using various CG applications since the 80's. I'm not a salaried teacher, (although I would like that.. I'm a bit old :) ) I help out at the local FabLab, and answer questions on Blender Stack Exchange, along with my personal projects. BSE's @moonboots recommended one of your videos to a user there, which turned me on to your channel. I think it's actually quite hard to find tutorial videos which concisely address the topic in the title, without wandering off into side-issues, or the entire prerequisite set-up. Also, you appear to be bothered to learn how to do something yourself, before considering yourself qualified to teach others, and if there are aspects you don't know, you ask! Good plan. :)

Interesting thank you

: ) Arigatouuuu thank you buddy !

Thank you

Oh My Gosh! You explain it so well and so easy. Subbing for the future. You are the best!

@25games

4 жыл бұрын

Thank you very much :) I'm glad to help you!

Thank you...

thanks

I just started blender so I could have some potential into getting into a ROBLOX program. Ive been wanting to make tails, so this is helping!

for converting the curv geometry to mesh, press Alt + C

AHHHH 😭❤️😭😭😭👌

Thankss😭

good video

tnx,,,,

Yes

Thanks, on my 2.9 Blender the normals (fish bones) are off by default. Open the Overlays dropdown (next to the shading options at top right) and the checkbox is bottom left.

thanks! Your lesson is very on time, I hope this helps me learn how to make beautiful hairstyles in Blender

@25games

4 жыл бұрын

Hey :) Nice to hear that :) Cheers

Great Vid really helped me out alot. Im not sure if you have already but can you please do a "How to create teeth/mouth" or Maybe a "How to create eyes" tutorial as well?? Im really new to 3D modeling.

@25games

4 жыл бұрын

Hey Puppet Master. Thank you for your comment. Are you searching a tutorial for high or low poly character meshes?

@PuppetMaster-Blade

4 жыл бұрын

@@25games High Poly Meshes

Omg this is so easy everybody has to make it so hard and such a big deal about it but not this one

Alt+S does not alter Weight, but Radius. If you hit N and go to the Sidebar, you will be able to alter Weight, which, though, doesn't have any effect on Curve objects.

when i rotate using a ankor point it rotate the whole object rather than just the ancor? do you know how to change this?

Do you know how to reset the vertex weight back to 1 after scaling the whole curve? I scaled a curve up but want the bevel to still be the same size as the original bevel object.

@25games

3 жыл бұрын

Call up the side menu with 'N' and enter the 'Item' slot. There you find Radius value. 'Alt+S' shortcut actually influence this Radius value here. Check out the other ancor point values for their Radius.

@JackMinardi

3 жыл бұрын

@@25games Thanks!

I have similar software in my stomach. Runs every morning.

@25games

4 жыл бұрын

Seems legit XD

@genericgoogleaccount8907

3 жыл бұрын

It’s called tacobell, plus it comes with a free taco.

can you like tell us which buttons to press

Thanks for video Can you extrude along a spline with sharp angle?

@25games

3 жыл бұрын

Hey. I can't really imagine what you exactly want to do... do you want to create a spline with no tangets (hard edge)?

Thanks for the good tutorial but i have one question. I see hair creation a lot of times using this method. What is the best way to get such hair into unreal engine 5?

how do i scale point in the curve on a single axis? Alt+S scales all axis

how do you like rotate your screen? i only can move from one side but i cant figure out how to move all around

@25games

3 жыл бұрын

Can you give me a timestamp for a camera Rotation example?

3:15 section sync 3:45 polygon resolution

2:53 Every girl who's watching this with a 3D printer: 😳

How can i change the size in axis?

Thank u for the tutorial. How can I make a curve that looks like a capsule? I mean the start and the end of the curve to be sphere not like this one which is a circle..

@25games

3 жыл бұрын

Hey. I haven't found a solution yet. Maybe I will handle this topic soon.

@vida8356

3 жыл бұрын

@@25games someone taught me to put an extra vertex near the end vertex and play around with the radius to make them more like a sphere(make the very last one like 0.0001 and the next to the last one 1). It's not really ideal but it made the result I wanted

Just wondering how I then create more horn/vine shapes joining on to this mesh?

@25games

3 жыл бұрын

You can create multiple curves but can't join them. If you want to do that then you need to transform the shape to a mesh and use join or boolean to combine shapes.

I use blender 2.79 because my laptop is outdated. But is there any way you can do this in blender 2.79? (Turning it to mesh)

@25games

3 жыл бұрын

In Blender 2.79 you have to press 'Alt+C' to call up the 'Convert to' panel and select 'Mesh from Curve/Meta/Surf/Text'

How to join 2 curves together to make it 1 ?

I got stuck after 1 minut :( my cirkel did not show up when using the bevel/obejct thing... :( i did what you did but without the circle, i just changed the depht. But how do i get volume so i can start modelling some details on to it`?

@25games

4 жыл бұрын

Hey. You need the bezier curve + the circle. Select the curve, go to object data properties > geometry > Bevel > Object and select there the circle. Then you shoulg get volume on your curve. To edit the volume you need to do an rightclick on object mode and select 'convert to mesh'.

@ra6865

4 жыл бұрын

@@25games thanks alot!

Why i cant select target why

when I try 0:45 to select an objet, in my selector box dosen't show me anything, how can I fix it?

@25games

4 жыл бұрын

Maybe you haven't created a second curve so far? Or maybe you have created an mesh instead of an curve. It is possible to create an mesh > cyrcle... but this will not work! It has to be curve > cyrcle!

@rinnyrr

4 жыл бұрын

25games when I clicked on BeizerCurve, it gave me a flat circle and not what you got.

tysm i now have a chance to get in roblox UGC

You don't need the circle just use bevel in properties and alt s to scale end point!

@25games

3 жыл бұрын

Thanks for the hint! I will try this!

@petertremblay3725

3 жыл бұрын

@@25games You are welcome

When I convert to mesh it does not seal the ends like it did in your video. What am I doing wrong?

@25games

3 жыл бұрын

You have 'Fill Caps' enabled? If so then I'm sorry because I don't have any idea why it is not working for you.

why i cant select circle as an object on my bezier curve bevel?

@25games

3 жыл бұрын

Sorry, I don't know what you want to do exactly... ? Which circly do you want to select?

@gyriann1660

3 жыл бұрын

​@@25games My bad, I picked the wrong circle not the bezier circle.

why when i do something it clips

Why you can bevel a curve in blender? Doesn't the bevel mean making fillet or chamfer to an edge ? What is the inner logic behind curve beveling?

How to had a texture for a curve ?

@25games

3 жыл бұрын

I'm not sure if it is possible to add a texture to a curve. Basically I would convert it to a mesh and then assign a material.

hello circle is not showing in beval as a choose i tried every thing and nothing showed up what am doing wrong plz :(

@25games

4 жыл бұрын

Hey. Are you sure that you imported an curve and not a mesh? You are able to create a circle Shift A > Mesh > Circle as well... But it have to be a bezier curve. Prss Shift A > Curve > Circle

@lolabonita2460

4 жыл бұрын

@@25games i imported a mesh instead of curve ty sooooo much

2:42 The "Alt+S" shortcut is not doing anything, I can see the tool creating the line and the cursor but no matter how I move it, it does not change the thickness.

I already fail at the beginning: cannot see the circle object in my selection. :(

@25games

4 жыл бұрын

Hey. Why you was not able to see it? Have you already solved your issue?

@darknessringo5989

4 жыл бұрын

The "circle" isn't a mesh object. It needs to be a curve object as well. If you click on the bevel/taper input field you will get a list of valid object you can select. This is the solution to your problem.

at me their orientation is wrong , how can i fix it?

@25games

4 жыл бұрын

The orientation of whom? or of which object?

There is no "Object" option in bevel in my more recent version of Blender...

@25games

2 жыл бұрын

Hey. I made a update video for that: kzread.info/dash/bejne/pa1_kravftuWaKg.html Cheers!

@boitahaki

2 жыл бұрын

@@25games Thanks!

2:22 it wont subdivide for me anyone got any idea?

@25games

4 жыл бұрын

Have you selected both ancor points which should be subdivided?

@malar2473

4 жыл бұрын

@@25games yes shift left click on the middle point of the anchor points

@25games

4 жыл бұрын

mhm. I can't figure out your problem. I tried it again >> create new bezier curve > edit mode > select your wanted ancor points both > rightclick > subdivide. Which Blender Version do you have?

@malar2473

4 жыл бұрын

@@25games i tried again too and no luck and i have 2.82a

Alt+S

This dude sounds like he has auto generated voice from those kids alphabet piano tablet