Hi I'm Ryan needle and my whole family is sleeping

@mr.boombastic8612

6 жыл бұрын

Your a fake

@traysonwhitworth8968

4 жыл бұрын

Did I ask ?

I like how everyone Disses on Ryan but he grew real big and everyone thought he wouldn't

the multi-purpose ties tip was sick man lol THANKS brother

hey man, just wanted to add something, instead of using your hands to mark it i find it easier to mark it with scotch tape on the spoke where it starts and ends great tutorial tho thanks fam

Yo my man thanks a lot finally found the right video 👌🏼

thanks for uploading! this was a big help

Cool video. Everyone should know how to maintain their bikes. Getting a wheel true on a BMX is very simple. I ride a Mountain bike/racer hybrid and I constantly have to check my spokes. When I'm lacing a wheel I use the sound of the spoke being tapped to make sure I have equal pressure. Being a musician is useful for some things.

Nice video man!!! Thanks for the help too I want to try it I just need to buy a wrench

thanks a lot. really good tutorial man. + 1 sub

awesome vids man

You said at 3:25, start loosening but you were turning anti-clockwise which is tightening. It's not lefty loosy, righty tighty. It's opposite.

@thestinkyslug9447

7 жыл бұрын

Jamie Bales your an idiot, it's always been lefty loosy righty tighty.

@jamiebales8394

7 жыл бұрын

JDS BMX. No, Sir. In this instance, you are an idiot.

Thanks... Good Job 👏🏾

I'm wondering that whenever I do a bunnyhop and my back wheel is to the side of me if that is whats making it wobble. Idk if it's because I didn't put it together correctly or just because I'm way rough on it

Helped a lot

So all you basically gotta do is loosen your spokes where its bent and then simply tighten them??

very helpfull thanks mate

Alright so my spokes were super loose and i bought a got a spoke wrench and tightened them way more then half a turn because they were really like really loose. This was yesterday and now it goes side to side even worse lol what do i do?

This helped me out so much thanks a lot bro!

@WereAreSector

8 жыл бұрын

And instead of a spoke wrench I just used pliers

@WereAreSector

8 жыл бұрын

yea bro i cant wait to see your channel go far

how do you center it Up/down instead of left/right?

does it matter if tyre is on an pumped up??

My spoke wrench😂

When you lace it how many do you skip?

my rim was rightey loosey lefty tighty but i was going the other way and my spokes are now stripped out

What tire is that? I like that tread

after you loosen the touching side then tighten the other side, do you tighten the side you loosened again?

@jsrbmx2502

8 жыл бұрын

ok thanks

if i wanted to correct a wheel hop, could i just tighten the spokes on each side at the high spot evenly?

@matthewabt2545

8 жыл бұрын

You could try but wheel hops are extremely difficult to correct

Also have you ever experienced a grinding/popping sound coming from your cranks? Because I have that problem right now and if you could tell me how to get rid of that sound I would love you forever (no homo)

@sukidk2847

7 жыл бұрын

check ur bb bearings

@matthewrobinson9604

6 жыл бұрын

Check that your chan is clean as well as you B.B. bearings and sprocket. Also that there is a thin coat of grease on you spindles. (I hade the same problem) then tighten everything back up again.

@jeremiahs4862

6 жыл бұрын

no homo man

Thanks

Do you still true your wheels like this

thanks

how often you usually have to true your rim? One day of riding, week of riding or how long? And thanks for the great vid man!

@diresword5046

7 жыл бұрын

Zjesse_98 you probably already googled it since this is an old comment but I usually check every two weeks of hard riding and one month if just casual riding.

@zombii3459

5 жыл бұрын

After riding my bike 3 times at a skatepark, i gotta true it.

@elijahguillen9922

5 жыл бұрын

Javier g exactly

@ihvspyn

4 жыл бұрын

Javier g yes i am tryin new skills after 2 or 3 days i need to true

this really helped

@Create_o_raptor

8 жыл бұрын

+Needle Media no thank you for the video

1.14 and 1.21 did you say "forsk"?

Also if I am done truing it and i hear the spokes making noise because some are too loose can i tighten the spoke that is loose or do i have to tighten em all.

@bobbychingster7521

8 жыл бұрын

And what happens if i dont?

@bobbychingster7521

8 жыл бұрын

Ok well I did that by accident. How can i un do that??? True it again?

I NEED THAT BACKGROUND SONG!!

@Denasdc

8 жыл бұрын

/watch?v=NAXfMbrdRKI

i could se it and hear it

5:00

+ Needle Media you want to do them 1/4 turns not 1/2. I know this is an older video, but 1/4 turns is safer and alot easier to adjust to really get the wheel straight. 1/2 turns to most people get them somehow to totally screw up the wheel and end up needing a shop. No idea why because it's simple to do...but I have seen it way too much

Bro, how do you get a small hop out of the rim?

@maxrc1912

7 жыл бұрын

the same way you true side to side, but you want to tighten spokes where the hop is 1/4 turn then loosen opposite side

its only 50 pesos to get your rim true here in philippines which is 1$ in us

@googledefault1050

6 жыл бұрын

Jeremy Marcelo hahaha tol san pwede mag pa true? haha

I dont get it

what tyres do you run bro

Nice guide! I will try to not destroy something :P:D +1sub and i droped a like

Ha I thought i could true my rear wheel but I am now realizing my dropouts and my front fork are bent way out of wack so there's no real point

Put the ending in the beginning for God’s sake

how this little tool called?

@sonid4205

7 жыл бұрын

I mean with this thing that y actually fix the spokes

I can't fucking do it

I just fucked my back wheel beyond repair

maybe his wheel is fake