Пікірлер

• 
  @user-pb4gz2vx9k2 күн бұрын

  Do not use that shit on a bike ,car or any tire. Try taking the tire off after it's in the tire , like super glue on the bead and rim. You will need a chisel to get off.

• 
  @samanthaburgess48288 күн бұрын

  I know this video is pretty old but I figured this may help someone who is currently looking into doing the same thing! I foamed my wagon tires and I made four holes on the same side of the tire! But the most important part is you need to take the tube out! You don't want the tube in there! You're going to also want to spray just a little bit of water in each hole, this will help the end result have fewer air bubbles in it as well! You're going to have an overflow! What I did was I let it come out of the holes for a good minute or two, then I plugged all but one of the holes and then wrapped the tires in plastic wrap (because it kept pushing out the bolts lol! Andi didn't have tape strong enough to hold them in place! I felt that plugging three out of the four holes helped it expand more to the tire instead of towards the holes as in it was denser without the risk of big air pockets ! Also WEAR GLOVES!!!!!! If you get it on yourself or anything you can use acetone to remove it before it cures! Make sure it is safe to do so for whatever material you're going to be applying the acetone too! You can also put some into a large zip lock baggie, toss the straw and nozzle into the baggie with the acetone and shake the hell out of it and use a qtip or three to get all that foam out of the nozzle and straw then use those qtips to add some to the spout on the can or just drip a few drops of the acetone in the hole of the spout on the can itself and you will be able to reuse it instead of it being trash!

• 
  @Thumper689 күн бұрын

  Do you not read instructions the valve stem should be at 6 o’clock while filled and spin it after done for awhile. One can of fix a flat can easily fill a car tire it should do 5-6’bike tires. But you need a solid valve stem and solid wheel like a plastic one and no tube.

• 
  @Thumper689 күн бұрын

  Depending on foam used it will have different density and hardness

• 
  @Thumper689 күн бұрын

  Brake cleaner or super glue remover to get off habds

• 
  @Thumper689 күн бұрын

  Dude 1 can would be more then enough foam to do two tires and the only way to do this is to open part of tire from wheel and spray a bunch in set the bead of tire then spin it really fast to spread it around

• 
  @1grievee10 күн бұрын

  if i see u or tony in cuse im slapping tf out you

• 
  @1grievee10 күн бұрын

  noodle media

• 
  @XxGlistenxXАй бұрын

  It's water lol😂

• 
  @voxnaАй бұрын

  Your on to something DO NOT KEEP SEEKING!!!!😊

• 
  @kosthsgav6309Ай бұрын

  Hi! it's easier to manual a freestyle scooter than a bmx bike?

• 
  @TheCandyman024Ай бұрын

  Rochester Michigan??? Where you from because I'm from Michigan too about 15 mins away from Pontiac Michigan

• 
  @ianward7376Ай бұрын

  Bought Raifords, not happy. Prefer United team grips on my other bike. Next time going for S&M Hoders. Awesome video Ryan 👌👍👊

• 
  @keithandamymelugin6789Ай бұрын

  TRY THEM DOOOOOOOOOOOOOOOA DONTTTIII

• 
  @liamhemmings9387Ай бұрын

  I watched your videos back when I was 14 and you were one of my favourite KZreadrs, now I am 21 and thanks to influencers like yourself I’ve now got a career in bike mechanics and work for trek you taught me a lot of things that I use in my day to day life so thank you for making the videos, I’m glad to see you’re doing well Ryan ❤

• 
  @wampastompa6434Ай бұрын

  I'd not wanna watch a movie bro

• 
  @thomasusheriii9712 ай бұрын

  32 bit can't sound that much better, can it?

• 
  @thomasusheriii9712 ай бұрын

  I Was going to order the new Zoom H1N and then canceled my order remembering that I have that same Mic as you. Then I see this video. It was a gift from my brother years ago and I hardly use it.

• 
  @NicholasAShaw2 ай бұрын

  tear 4:32

• 
  @angelica972 ай бұрын

  The footage with that red camera looks like one of that old 2008-youtube videos with a jumpscare at the end

• 
  @craiggibson19732 ай бұрын

  Nevermind I meant to the rim

• 
  @craiggibson19732 ай бұрын

  Mine were glued and I hated it more than anything

• 
  @underwaterdive12 ай бұрын

  Dam😊

• 
  @eddiedartt25962 ай бұрын

  You did not change your front tire and Amanda in 10 seconds you didn't even pump up the tire all the way and then second thing is you change the front tire anybody can change the front tire super fast it's not that hard you're not that good at changing bikes besides the fact you sound like you don't really know what you're talking about and you look

• 
  @The_Wizard_Man2 ай бұрын

  Who still needs help in 2024

• 
  @NorgeSquad2 ай бұрын

  NO WAY!!!!!

• 
  @NeedleMedia2 ай бұрын

  YES

• 
  @davidscott4562 ай бұрын

  Just glad to have you back!

• 
  @NeedleMedia2 ай бұрын

  thanks!

• 
  @Troubledboy882 ай бұрын

  This is a bad idea! I bought a wheel from a guy and I literally had to CUT THE TIRE OFF! And the wheel itself looks like absolute garbage with the foam stuck everywhere. I’ve tried multiple solvents to remove it. But nothing works. If you do it, do it on wheels and tires you don’t care about. I prefer slime and tube liners

• 
  @Kukoka_Ch.2 ай бұрын

  i'm 260lbs can I still use any bike under 400 to get into bmx?

• 
  @NeedleMedia2 ай бұрын

  yes

• 
  @Kukoka_Ch.2 ай бұрын

  @@NeedleMedia idk because everywhere I look everyone says im too heavy to use a hi tensile steel frame and everything else is too expensive

• 
  @RavenYT_CC2 ай бұрын

  7:50 is when it starts

• 
  @NeedleMedia2 ай бұрын

  Thanks bro!

• 
  @RavenYT_CC2 ай бұрын

  @@NeedleMedia no problem 😊

• 
  @nylanorris95502 ай бұрын

  ❤❤❤

• 
  @NeedleMedia2 ай бұрын

  😍😍

• 
  @recklesslove6022 ай бұрын

  Oh idk that looks fun, so flower men❤

• 
  @NeedleMedia2 ай бұрын

  Great choice!!

• 
  @gabbieweatherman64682 ай бұрын

  Flower Men...

• 
  @NeedleMedia2 ай бұрын

  For sure…

• 
  @kathryncragg62582 ай бұрын

  Not if they're going to act like idiots.

• 
  @NeedleMedia2 ай бұрын

  Have some fun!

• 
  @juliel86022 ай бұрын

  The fanny packs😂

• 
  @NeedleMedia2 ай бұрын

  Actually gold😂😂

• 
  @deborahsmith18532 ай бұрын

  Made my day!

• 
  @NeedleMedia2 ай бұрын

  Glad to hear:)

• 
  @julez4jesus2 ай бұрын

  Hahahahaha!! 🤣🤣🤣🤣🤣 They look like the Blues Bros w/out the blk suits! 😆😆😆😆😆

• 
  @NeedleMedia2 ай бұрын

  Bahahaha!!!

• 
  @mistercohaagen2 ай бұрын

  They need to make a 32bit version that has the same mic array. Internal shock mounting / real wind muff would be nice. They abandoned their old modular mic capsules, so I've left Zoom behind.

• 
  @NeedleMedia2 ай бұрын

  So true. What are you on now?

• 
  @mistercohaagen2 ай бұрын

  @@NeedleMedia Tascam Portacapture X8 for "X/Y", and a Audio-Technica BP4029 for "M/S" micing. I bet a Zoom F2 with a Rode VideoMicro II would work for a simple 32bit mic. I used one into one of the Tentacle Track E's I already had, and it sounds super clean. The things you can do with M/S in post is just too powerful to give up though, especially for the purpose you're talking about.

• 
  @Jamie_styles2 ай бұрын

  Untill they get home😏

• 
  @NeedleMedia2 ай бұрын

  Wow

• 
  @robertwise61252 ай бұрын

  I love

• 
  @NeedleMedia2 ай бұрын

  Right?!

• 
  @markfreeman20222 ай бұрын

  Welcome back! Have you been hitting he gym? How much do you weigh now? Love the videos

• 
  @NeedleMedia2 ай бұрын

  Hey Mark, thanks for the comment. I have been hitting the gym lately! Right now i’m currently at 170. Thanks for the feedback!

• 
  @BassAddiction022 ай бұрын

  Naw These Actually Cold and ayeee W First Comment hahaha

• 
  @NeedleMedia2 ай бұрын

  Legend!

• 
  @Mr.entropy__2 ай бұрын

  Talk too much boring

• 
  @NeedleMedia2 ай бұрын

  Ope.

• 
  @jodimarvin3 ай бұрын

  OMG Ryan. I'm rolling! This is freakin' great!

• 
  @NeedleMedia2 ай бұрын

  Thanks Jodi!!!

• 
  @eprohoda3 ай бұрын

  How r u?- bravo. breathtaking shots,see ya!Needle. 🤩

• 
  @NeedleMedia2 ай бұрын

  Yes, thank you

• 
  @nothvman68133 ай бұрын

  My kids are just starting to actually start riding, and i still ride too, so wed watch more bmx vids

• 
  @NeedleMedia2 ай бұрын

  Thanks for the feedback!

• 
  @kellyeaton72523 ай бұрын

  If you were a better filmmaker, you'd treat the interview like a conversation. Clearly he's totally capable of that. You simply ain't capable of making him feel comfortable. Shitty filmmakers.

• 
  @NeedleMedia3 ай бұрын

  This was 100% a joke and my friend. Unfortunately after 100000 interviews we can only do our best to make the interviewee feel comfortable. This was an exaggerated skit, thanks for watching and the comment though!

• 
  @Letop3563 ай бұрын

  Underrated

• 
  @NeedleMedia3 ай бұрын

  Appreciate you big dawg🤘🏻

• 
  @Poisaen3 ай бұрын

  very realistic

• 
  @NeedleMedia3 ай бұрын

  much real

• 
  @kylemcginnis59363 ай бұрын

  that tripod had a family 😢

• 
  @NeedleMedia2 ай бұрын

  Not anymore…