I was struggling with setting up my external synths. You explained it better than any other video I've seen.

@studioonetutorials

Жыл бұрын

Thank you for the kind words! I really appreciate it.

ABSOLUTELY crystal clear explanation of what can be a very confusing subject. THANK YOU!!!!

The only information that explain very professionally how to set up external device…thanks Lukas for you help and congratulations

@studioonetutorials

Ай бұрын

Thank you! I appreciate it.

This was extremely helpful! Was driving me crazy trying to control my Moog Subsequent 37 with my KEYSTEP PRO sequencer from within Studio One for recording. Didn't realize you needed 2 separate instances of the Sub37 ( instrument & keyboard )! Thanks!!!!

You are a mind reader! I"m digging in now. And... your first 'LIKE'!

I’m new to Studio 1. You skillfully explained critical information about setting up midi devices. This video is going to save me from enduring hours of frustration figuring things out. Thank you!

@studioonetutorials

11 ай бұрын

I'm glad you found it helpful!! Cheers, Lukas

Thank you Lucas Iam so happpy 🎉❤ we just subscribed

Great explanations and delivery of knowledge. Thank you

I would NOT have been able to do this without your video. You are the absolute best! Thank you!

@studioonetutorials

Жыл бұрын

Thank you for the kind words!! Glad to hear you found it helpful!

I have just purchased Studio One and have keyboards that I need to set up. Your video was clear and concise. It should help me a lot when I finally get to that point. Thank you again for agreat instructional video.

Thank you so much! Very helpful! I often wondered why my hardware keyboard would not play even though I had selected them to send and receive. Now I know! Thanks again!.

Great video, many thanks, i too like others needed this walk through

Thanks Man. Cleared up a lot for me. Just subscribed.

Thank you so much for this informative video. I've been struggling getting my Akai mpd218 hooked up and didn't realize I needed to have it as a keyboard not an instrument or controller alone..I did what you said and it worked!!! Keep up the good work brother.

Simple and concise. You got my subscription!

This is by far the best explanation on this. Been searching for this, thank you !!

@studioonetutorials

2 ай бұрын

Thank you! I'm glad you found it helpful.

Struggling to figure this out so I needed this. Thank you.

This was extremely helpful! I finally understand how to add an instrument properly. I'm surprised nobody else has documented this is well as you have. Thank you!

@studioonetutorials

3 ай бұрын

Great. I'm glad you found it useful!

Brilliant. Im new to S1 and I couldnt work out all the details on this. Thank you.

Excellent explanation!!

very helpful, thanks a lot

Fantastic! Now I have my Jupiter-50 set up in a way that is much more useful to me while using StudioOne 6. Thank you!

Excellent thank you!

Thanks for the video very helpful

Terrific!

Hello! Thank you very much for teaching. I'm going crazy because I couldn't figure out the solution. But thanks to you, I was enlightened. So thank you very much Sensei.

Thank you for this...i was so confused coming from cubase ... this explains it.

Thank you 🙏

Perfect Thanks!

This was just what I was looking for, now I will go and set up my external instruments. Thanks a lot :-I

@thestressexitman3413

10 ай бұрын

Unfortunally, I have nothing else than my external sound card (Presonus studio 24 c) to choose from, when I use the drop down menu Send to. None of my synths or even a midi out. Any suggestions what I need to do? Have you added a driver to or likewise for the Nord Stage 3 MIDI in a certain folder or ...?

Thanks Lukas 👌

Brilliant! TY😊

Thank you.

OMG 7:18 For something so simple I could not figure out for the life of me why the input was not showing and drum machine was not working. All I had to do was expand the track control zoom. Thank you so much!!!!

I hope you earn money for this because it was extremely profesional and clear.

@studioonetutorials

5 ай бұрын

Thank you, I appreciate that. I'm glad it was helpful!

Hi, your video is pretty clear. Now I need to know how to set up my Akai mpd 218 on Studio One so I can use it as a drum pad and assign selected sounds to each pad from ezdrummer. Thanks for your precious help.

Finally it helped 😮

will do.

Well explained..Excellent. Can i send back Real Guitar Vi stumming to my yamaha sx900 similarly..wish to embed it in the Style...

Great video, Lukas. I still can't get the transport buttons working on my Keystation 88 Mk3.

for 2 weeks I have been trying to get my midi keyboard to work as an input device. It was working before, but I must have touched something to cause the problem. but I don't know what. after 50 or more vidios, I came across yours. problem solved. why, because you included what appeared to be an incidental procedure. the instrument track has a drop function for input and output for the instrument here laid my problem. and here was the solution. Thank you for a well laid out informative how to tutorial. most 3rd party tutorials are weak on the subject, constantly tajking around subject and confusing. you were right the mark the whole time. thank you again, I leard something today.

@studioonetutorials

6 ай бұрын

Hey, that's great. Glad you found it helpful! If you'd like to support my channel, I'd appreciate it if you'd subscribe (and click the bell icon if you'd like to receive notifications for new Studio One videos).

@clembisto6654

5 ай бұрын

I still have no output from my midi keyboard, and I don't know what or where you referred to as " the instrument track has a drop function for input and output for the instrument". Please specify where this setting is located. Many thanks

@studioonetutorials

5 ай бұрын

@@clembisto6654 Drop function? No output from your MIDI keyboard? I don't really know what you are reffering to here. Where did I mention that?

@DrPatrickEhlen

4 ай бұрын

@@studioonetutorials Those are the words of the prior person who posted. By "drop function" he is referring to the drop-down menu located to the left of your track where you should select the external keyboard to use for input. So after you create the connection using "New Keyboard" in the "External Devices" menu, you will also need to select that input for your track, using the "Instrument Input" drop-down menu.

@studioonetutorials

4 ай бұрын

@@DrPatrickEhlenOkay, yes. So this is what I've shown at 7:20.

I have the mpk mini mk3. I add it using the preset. Thanks to your video I know how to record using my key board, but I can only hear what I hit when I play back the recording.

Great video and explanations. Thanks.. I saw you have the Moog Sub 37 in S1, which I had some troubles setting up correctly. Not sure if I could use the Subsequent editor effectively as an Instrument or need to use as an FX 2 record automations, since automation messages are sent both through the editor and the S1 keyboard and instrument. And how to setup the S1 instrument and Subsequent Editor for it. Like filtering options, midi channels, clock sync, etc.. Some help would be appreciated, or maybe you could even make a video going through your settings for it, since there seems to really be no videos out for setting up a Moog with S1. 😉

Danke Lukas, warum kann der Hersteller das nicht auch gleich so erklären? Ich habe so viel Zeit verloren und nix hat funktioniert, bis ich jetzt Dein Video gesehen habe. Du erklärst mit wenigen Worten klar und anschaulich, ohne verzetteln, dazu noch mit einer angenehmen Stimme. Ich will für meinen Kanal künftig auch eigene Aufnahmen machen, dafür der ganze Aufwand. Jetzt kann ich wieder Spaß an dem Ganzen haben, war kurz davor, Audiobox + Studio One in die Tonne zu kloppen ... Danke Lukas, super, bis abonniert und ich freue mich auf mehr!!👍🤜🤛

@studioonetutorials

Жыл бұрын

Danke für das Lob! Freut mich sehr, umso mehr, wenn du jetzt wieder mit Spaß an deine Projekte rangehen kannst. Mehr ist auf jeden Fall auf dem Weg! Grüße und schöne Pfingsten.

@Inner-Way

Жыл бұрын

@@studioonetutorials Habe gerade alles genau so eingerichtet (inkl. AUX-Kanal) und läuft 🙂. Nur 1 Problem: beim Abspielen kann ich nicht die Lautstärke in Studio One regeln, nur am Yamaha selber. Und: ich kann beim Yamaha die Instrumentenwahl nicht ändern. Wäre aber natürlich schon dsa Ziel, ich will ja selber mischen können . Frage: bei Studion One > Optionen > Audiogerät, was hast Du da gewählt? Ich kann hir NICHT die AudioBox nehmen, weil ich sonst keinen Ton aus dem Computer bekomme, deshalb muss ich Windows Audio als Gerät wählen. Kann das damit zu tun haben? Merci vorab! Wo kann man Dir einen Kaffee kaufen???

Thanks, great video. Do you happen to have a video or recs on choosing a cheap midi controller keyboard? I'm looking for one that will work well with Studio One.

Great video. Could you do one adding a instrument connect to the Quantum 2626 and with the software.

Thanks so much for this! Studio One is usually pretty intuitive but those three types of external devices are not described very well! (couldn't get my Behringer RD8 to trigger anything til I saw your video and connected it as a "keyboard")

Great video, I do have a question does it apply if I’m using a controller like Arturia Beatstep pro with studio one 5 pro?

I have roland spd 30 pad drum. How to connect it??

Excellent Video. The one thing that I still cant find is how to use my keyboard to record other sounds using the Studio One Instruments. For example, I want to use the PreSonus Impact drum kit, the default kit. How do I set up the options on my keyboard/controller? Thank you.

Video please on connecting 3 or 4 Sound Modules to be played by the main keyboard. Thank you

500. Beğeni benden.. Kralsın... Teşekkürler...

Great video! Nice. Slow. Methodical. And describing all the available parameters. Can you also show how to create the aux channel in the console for the audio. So that it all comes up together when selecting it as the External instrument in the browser?

@studioonetutorials

Жыл бұрын

Thanks Ronald. I have a video on AUX channels and the External Instruments section in the browser, but it's in German. I might do this video again in English... for now, perhaps watching it with English (auto-translated) subtitles is an option...?

@samuelmaylor6634

Жыл бұрын

Yes please do a video in english I would greatly appreciate it. does this also work in Studio One 5. thank you

This was very informative. I have 3 Korg Keyboards and have been struggling with how to record them without using the VSt's. I will try to add my Kronos as a keyboard for input and as an instrument for output. I am using Studio One Version 6. I typically play using combis rather than plain piano/organ patches. Will this affect the setup in any way?

This video makes what is otherwise a very confusing aspect of Studio One, very easy to understand. Bravo! I have an additional question: I want to trigger multiple channels on my external device similar to the way that a Multi Instrument works in Studio One. I would like to have one track of MIDI data routed to different channels on my external device without having to duplicate the MIDI data in an additional track. Is that possible?

Danke, das hilft echt weiter. Ich schätze in kommenden Versionen wird die Einrichtung vereinfacht wie sie es bereits beim einrichten von FX im Mixer wurde.

@studioonetutorials

Жыл бұрын

Bestimmt wird es hier früher oder später auch Verbesserungen geben.

Could you please explain how to map Nektar Impact LX61+ with Studio one 6

Hi. Great, very useful video, Just Subscribed. I have a question. I just installed my studio one 6, works fine except 2 things. There is a very annoying hissing background noise and I cant get rid of it. The other thing, how can I use the virtual instrument plug ins. I drag them into the track, but I am actually not able to play the virtual instruments, just the actual sound of my digital piano. The piano audio connected using audiobox 96. So do I need a midi controller to play on the virtual instruments, or can I use the digital piano? Do i need midi connection for this? Thank you, Tom

Nice video Lucas. I've set up Studio One 6.5 to do just this and it all works as described except that Sudio One only transmits note on/off and pitch bend, but not CC controllers such as sustain, modulation, etc. I've verified using the MIDI monitor. Do you know why this is the case? I can't seem to find an answer.

Good video- have a question for anyone here: using my Keystep 37 to control synths both external and VSTs. Works great say when controlling my Typhon (Inst setup on MIDI 16), but when I select another device it plays the Typhon still. Is there a way to have it play only the track/Inst selected at the time?

Lukas, I have a motu 128 to get most midi gear together, a few usb devices, Komplete Audio6 and a StudioLive 16 USB mixer. Do you have one or more videos to help me route PreSonus pc to moto+usb, other pc midi intfc to either use mixer or a seperate PreSonus laptop to usb mixer. I play, record and playback. Its a jungle in here. Thanks!

Hi Lukas... I would like to ask you how I should setup my guitar synthesizer Roland GR-55 in Studio One 6... Thank you in advance for your support...

Thanks Lukas, I've done identically with a Yamaha YC61, still no success on getting any sounds out from the YC61. No issues with drag n drop VST's, they play well when it acts as a MIDI controller, no sound back out of the built in sounds from the actual keyboard. Tried Local ON:OFF no success. truly stumped. Thanks for pointing us in the right direction

How do you sync the midi clock - so the arpegiator tempo in the midi controller matches the tempo in Studio One?

I have my minilouge xd setup. I can see the midi triggers going into Studio One and I can see my 2i2 Interface receiving sound from the minilouge into its Inputs, but the sound is not making it to my audio out.

was this control surface video, mentioned in the end, ever done?

So did you put your midi cable from keyboard to audiobox then to laptop or straight from leyboard to laptop/pc? Id like to listen to my own sounds on my modx using my midi cable

Could you make a video on HOW to get MIDI bluetooth units, like WIDI or Yamaha MD-BTU, to work with Studio 1 on COMPUTER! All videos out there just show hooking up bluetooth MIDI senders to a phone or iPad. I need S1 to recognize BT MIDI in the MIDI set up page.

top muito bom faz video como exporta midi no extudio one para toca no teclado yamaha sx600

I have a Yamaha CS1-X an old vintage synth. I never knew what it was when I bought it, but turns out it's a pretty popular item. I believe it can be both keyboard and instrument, like you show here with that fantastic Nord Stage 3. I have a question: Can I set up my Akai MPK mini or my ATOM to be used as a control surface only? Many thanks for this vid and all your vids.

@studioonetutorials

Жыл бұрын

That's cool, the CS1-X is a great synth! Yes, you can set them up up as a control surface only if you want to use them for Control Link (automating plug-in parameters) or assigning Studio One commands to them.

Excellent, many thanks! I use my Roland Fantom X6 to play sounds, so just as an Instrument. What is the best way to send patch changes to it from Studio One? And is there a way of having all the Fantom's patches information stored in S1 so I can select changes from a list? (Cakewalk/Sonar has such a facility). Thanks!

@studioonetutorials

2 ай бұрын

I think you already found the right video :) I hope it helps!

hi nice channel new sub.. Lukas how can change a song to 432hz on studio one professional.. no videos about with studio one on utube

Help. I am recording my korg synth as midi keyboard from in/out midi cable and it seems to record well when i play but when i listen to the recording, the notes seem all over the place as timing. lowered the buffer size, still didnt work. I use Studio One 5

Unfortunately i still havent gotten it to work with my Roland Fantom 06, ive added and removed it numerous times as both instrument and keyboard with no luck. It finds it when adding a track, but wont show up as midi to be able to view it in keys in order to fix mistakes

Hey Lukas, vielen Dank - sehr hilfreich. Ich bin voll der midi-noob. Morgen kommt mein neuer Musiktisch und dann werde ich mal alles ordentlich stellen und verkabeln. Aktuell habe ich Maschine und Komplete S88 - Hänge aber noch meinen Motif.XS88 ein und die größte Herausforderung wird wohl mein Moog theremini sein. Bin gespannt... Danke dir...

@studioonetutorials

Жыл бұрын

Hey! Freut mich. Schönes Equipment! Einen Motif hatte ich auch mal, und den Theremini mal für ein paar einzelne Shows, das hat Spaß gemacht. Die Geräte kannst du alle genau so einrichten, du musst nur entscheiden, ob sie Keyboard, Instrument oder beides sein sollen.

@colognialist1964

Жыл бұрын

@@studioonetutorials ich werde berichten. Wem mir mein regulärer Job nicht wäre. 😂

I would like to use physical faders to add sounds (VSTs) to the normal sound of my midi guitar for LIVE & NOT STUDIO. I have been told that I must use an on-stage DAW with Studio One. Thank You Kindly

Ty, this was helpful. I struggle with this every time. Please do one for controllers as well. Q; when you route out midi to your keys, how does S1 hear the sound, as midi does not contain sound?

@patrickm.4469

10 ай бұрын

You can add an Aux channel to the instrument (if using a device that actually produces sound) kzread.info/dash/bejne/fJqYt9acqtqaoqw.html

Is it possible to use pads on my Akai mini in artist version?

Lucas do you have any videos explaining how to program a midi track to control an external device like a line 6 helix or similar . I know the coding for helix but clueless how to program in studio one

@studioonetutorials

16 күн бұрын

Indeed, I have. Do did not mention which kind of MIDI events your Helix etc. expects but most likely it's MIDI CCs and program changes. Here's a video that shows how to send program changes and create presets for the single hardware patches: kzread.info/dash/bejne/gKaZxpmCmdy0iJs.html For MIDI CCs, you can just add a new automation parameter in the automation lanes.

I have been battling with my alesis Q88 midi controller for days now it was working before all of a sudden it stopped working with studio one 6 I don't know what the problem is any tips?

HI - So i just found out that I cannot TRANSFORM THIS MIDI TO AUDIO? Or Bounce the tract to audio. My hope was that after I edited the Midi I would convert to Audio (So i would not need my sythesizer anymore). Do you know how I could do That?

sehr hilfreiches Video für mich als Switcher von Logic Pro 😊 dürfte ich Dich noch fragen, welchen Spurtyp Du bei Spur 1 ausgewählt hast? External Midi? Habe auch abonniert. danke Dir =)

@studioonetutorials

Жыл бұрын

Danke, freut mich! Spur 1 ist eine ganz normale Instrumentenspur. Ob ich die MIDI-Daten dann an ein virtuelles Instrument (VST, AU) oder per MIDI an eine Hardware schicke, ist der Spur erstmal egal, das regelt das Feld mit dem Keyboard-Symbol (uter dem Mute-Button der Spur).

Do you have an MPE synth? I have an issue and sent a support request to presonus: while I can monitor and record fine, Studio One 6 won't replay the recorded midi, there's no sound. Either I made a configuration mistake somewhere, but I don't see where, or this is a bug in S1, since I get it to work perfect;y in Bitwig Studio and Ableton Live.

Thank you very much for this information. I have an AKAI MidiMix that I use with S1 and I would love for the indicator lights for the REC and MUTE buttons to illuminate when activated. I've searched for a solution, but do not find anything. Do you have any insight if this is possible?

@studioonetutorials

Жыл бұрын

If the MidiMix does not use one of the standard protocols (MCU for example) for transport control, I don't think it's easily possible without writing a scripting layer for the device.

Hey man, hi, thanks for your video! I'm having a connection issue between my new Mininova and Studio One, and I can't seem to find a solution. Can I reach out to you via email or another method?

I connected my Yamaha pcr A5000 Yamaha , and I started playing and all of the sudden the sound it's started to come out of the keyboard although I can control it from studio one and I couldn't save it for some reason , just black recording .. any help ?

Say brother… I have the Roland Fantom X6 no-usb but it has the Midi in-out-thru dim cable connection. From my Roland X6 Workstation midi cable out to the In-of my Behringer Interface which then I plug usb to my Apple Mac Pro laptop… is this my procedure before I look it up in my Presonus Studio One 6.5 Sir??? Booey… connections or routing cable is my worst ability Sir!

I want to record a piano song i wrote but the studio one is recording every sound around me even when touxhing the laptop sound records it and it anoys me so much. Can samoene help me fix the problem i only want to record my piano

Thanks for the video. But how can I select the sound bank on your Nord from Studio one? Is there any midi manager like in Cubase so I would be a ble to choose the patch I want to be sounded?

@studioonetutorials

6 ай бұрын

Yes, the easiest way is to create Sound Variation maps. kzread.info/dash/bejne/iX2co9WqeLuciqw.html

@abolit

6 ай бұрын

Thank you!

Is there any way for S1 to remember which patch to play on the external synth? In other DAWs you would send sysex data from the synth to the DAW and then back when you load the project. Is there really no way to do this? Seems absolutely crucial for work with external analogue synths and VA's.

@studioonetutorials

Жыл бұрын

Yes you can use Sound Variation lists for that. I'm going to do a dedicated video on that but for now take a look at this one: kzread.info/dash/bejne/iX2co9WqeLuciqw.html

Good , to the point But, We need to see any work around to make Midi-out for an Instrument track to other Instrument track One of these ways as I recall was to make a midi controller , send note to itself as well (choose it to send, receive too) Make an instrument track, put virtual instrument on it Then make it an input to other instrument track It was confusing But it was very well to use with Arturia Vocoder v for live performance within the DAW Sending an instrument track signal to its track Or Sending an audio track signal to its track

I added my Prophet Rev2 as mentioned in the video, connected by a USB cable. I can record audio without any issue (with the audio cable), but I can't use it as a USB keyboard for other VSTs. It's selected as the MIDI Keyboard, but no MIDI signal comes in. Do you have any ideas what could be the issue?

@studioonetutorials

3 ай бұрын

You need to check the settings in the Prophet. Maybe MIDI out is turned off or a different MIDI channel is set that you have blocked in Studio One...

Hi und danke für das Video. Ich bin gerade auf der Suche nach einer DAW die externe Geräte so nutzt wie du das hier mit der Workstation erklärt hast. Weißt du, ob das alle Versionen von Studio ONE haben oder braucht man die Professional oder gar die Plus für das Feature?

@studioonetutorials

10 ай бұрын

Ja, diese Geräteverwaltung funktioniert genau gleich in allen Versionen, also auch in der Artist-Version. (Die große Version ist übrigens die Professional-Version, PLUS ist genau das gleiche Programm, da kannst du nur noch mehr Content herunterladen mit dem PLUS-Abo.)

I still cannot get my midi keyboard to trigger S1. It triggers my interface. Virtual sounds can be played by hitting the on screen keyboard within its own window but try as i might i cant get midi to trigger within S1

What about if I only have my laptop keyboard?

Still confused. I have a Yamaha MX88. I want to record different instruments exactly as they sound on my MX 88 to Studio One. How is the best way to do that? Also like at the end where he switches from Piano to Elec Keyboard. I want to lay down a piano track. Now if I want to put down a guitar track and change my MX to guitar, it changes the piano track I recorded to guitar. Do I need to lay down the piano track and somehow save it? I saw another video that said if you set up as Keyboard and Instrument you are stuck always being live (meaning whatever I set the MX to, that's what's going to play back.) Total novice, hope this makes sense. Also for those familiar with MX, it has 2 channels. What do I do when I want to add a 3rd track and 4th track with different MX instruments. I find if I change to Channel 3, I get an instrument sound that is not from my MX and I can't change it.

For an MPC One would you add keyboard and instrument also? Thanks

@studioonetutorials

6 ай бұрын

If it's an instrument (generates sound) and not only a controller, then yes.

@Magnetic1908

6 ай бұрын

@@studioonetutorials great channel, thanks!

On the new instrument window there is also an option "recieve from" that you havent explain. I know its not important in the average scenario but what does this do? Is it the same as the instrument input found on the track but you set it as a default?

@studioonetutorials

11 ай бұрын

It's needed for bidirectional usage of automation. If you have an external synth and you tweak some knobs (effect parameters etc.), this can be used to get the automation into Studio One. A rather unusual scenario considering most people use virtual instruments anyway.

@andreasy870

11 ай бұрын

@@studioonetutorials Thanks!

and im here a month later and havent seen any answer to my concern. my issue is in the sent area. you had to enter a new instrument then chose an item in the RECEIVE. but how did that option get there in the first place? I try to connect my alesis 8.1. i do that but the only option in the RECEIVE area is my faderport16. at a loss still after a month

@studioonetutorials

10 ай бұрын

It lists all available MIDI devices. If your Alesis 8.1 does not show up there, it's not recognized by your OS. You either have to install a driver, check the USB connection... or if it's an older device without USB MIDI, you need to use your audio interface MIDI port.

@HARDDRlVER

10 ай бұрын

@@studioonetutorials I apologize. I did realize that, after I posted. Issues with my interface, not S1. Again, my apologies

老师如何在Studio one录制的MIDI轨道上使用外部合成器音色，保存DAW项目，并在下次打开项目时自动对应外部合成器音色列表？

@studioonetutorials

3 ай бұрын

I do not understand :)

@xiaotianqian176

3 ай бұрын

I use Roland Fantom synthesizer, record the MIDI track in Studio one, use the tone in Fantom, and then save the DAW project. Next time I open the project, how to automatically correspond to each track in the synthesizer.@@studioonetutorials