How to Set a GoPro to AUTOMATICALLY RECORD on Movement - 2021
Жүктеу.....
Пікірлер: 14
@MaxLang-vb4sgКүн бұрын
I use QR control on the App Store. Designed to control modes of the GoPro LABS software
@MCsCreations3 жыл бұрын
Pretty interesting indeed, dude! Really nice! 😃 Stay safe there with your family! 🖖😊
@5zero7RC
3 жыл бұрын
Thanks, you too!
@PetrPolach2 жыл бұрын
You dont have to scan the barcode. each time. If you use this camera only with this mode(dedicated, maybe mounted on drope) you can set the movement detection command to boot sequece. The remote is not good solution. While flying it wil go out of pair and it takes quite long time to make it automatically paired again once the remote is in range again. Also it is not reliable and many times you have delays when pressing buttons.
@BOREDANDWELLBORED
Жыл бұрын
"set the movement detection command on boot"... Can you type it so ordinary folks can understand what you mean? How do you "set the command on boot"? Which buttons do I press?
@Maestro_02_Berkelana2 жыл бұрын
Hi,, I am from Indonesia. thanks for your video.. by the way, can this gopro labs record timelapse triggered by motion.
@MactacFPV3 жыл бұрын
This could be fantastic, as long as it's 100% dependable. Since you can't really check to see if it's recording once you are in the air, you have to trust it 100% - finding out that it didn't start recording after you're landed would be pretty annoying. Also, you have to remember to put it into this mode... so how is this different from having to remember to press record?
@5zero7RC
3 жыл бұрын
I agree, making sure this mode is enabled is just about as hard as remembering to hit the record button in the first place. :) So many great flights never get recorded. Such as shame. Though I think some of those are just fish tales like the one that got away :)
@0dan0
3 жыл бұрын
@@5zero7RC You can make it auto run the IMU Trigger command upon the detection of power, handy if you power the camera from the drone. Never need to remember. If you have a non-naked GoPro (still have the screen) you can be even more certain by loading the command automatically on any start up. Ask how in the Labs forum: community.gopro.com/t5/GoPro-Labs/bd-p/GoProLabs
@JayFPV3 жыл бұрын
It's a useful tip... thanks for sharing!!
@atlanticonly92702 жыл бұрын
What mounting bracket are you using for your gopro? The one I'm using seems to create a lot of vibration.
@5zero7RC
2 жыл бұрын
I use a 3d printed TPU mount that I found on Thingiverse and then modified the design to fit my frame.
@ProfesaFx3 жыл бұрын
dude !!! why don't you just use the voice command ?
@5zero7RC
3 жыл бұрын
Voice commands drain the battery a lot and I typically fly from inside my car, so I'd have to open the window and yell at the GoPro anyway and just guess that it heard me or not. :)
Пікірлер: 14
I use QR control on the App Store. Designed to control modes of the GoPro LABS software
Pretty interesting indeed, dude! Really nice! 😃 Stay safe there with your family! 🖖😊
@5zero7RC
3 жыл бұрын
Thanks, you too!
You dont have to scan the barcode. each time. If you use this camera only with this mode(dedicated, maybe mounted on drope) you can set the movement detection command to boot sequece. The remote is not good solution. While flying it wil go out of pair and it takes quite long time to make it automatically paired again once the remote is in range again. Also it is not reliable and many times you have delays when pressing buttons.
@BOREDANDWELLBORED
Жыл бұрын
"set the movement detection command on boot"... Can you type it so ordinary folks can understand what you mean? How do you "set the command on boot"? Which buttons do I press?
Hi,, I am from Indonesia. thanks for your video.. by the way, can this gopro labs record timelapse triggered by motion.
This could be fantastic, as long as it's 100% dependable. Since you can't really check to see if it's recording once you are in the air, you have to trust it 100% - finding out that it didn't start recording after you're landed would be pretty annoying. Also, you have to remember to put it into this mode... so how is this different from having to remember to press record?
@5zero7RC
3 жыл бұрын
I agree, making sure this mode is enabled is just about as hard as remembering to hit the record button in the first place. :) So many great flights never get recorded. Such as shame. Though I think some of those are just fish tales like the one that got away :)
@0dan0
3 жыл бұрын
@@5zero7RC You can make it auto run the IMU Trigger command upon the detection of power, handy if you power the camera from the drone. Never need to remember. If you have a non-naked GoPro (still have the screen) you can be even more certain by loading the command automatically on any start up. Ask how in the Labs forum: community.gopro.com/t5/GoPro-Labs/bd-p/GoProLabs
It's a useful tip... thanks for sharing!!
What mounting bracket are you using for your gopro? The one I'm using seems to create a lot of vibration.
@5zero7RC
2 жыл бұрын
I use a 3d printed TPU mount that I found on Thingiverse and then modified the design to fit my frame.
dude !!! why don't you just use the voice command ?
@5zero7RC
3 жыл бұрын
Voice commands drain the battery a lot and I typically fly from inside my car, so I'd have to open the window and yell at the GoPro anyway and just guess that it heard me or not. :)