Пікірлер

• 
  @M.TTT.21 сағат бұрын

  Hmm, mine says "Looking for devices" despite being on openTX 2.3.9 on my QX7s. I'll have to keep looking for a solution

• 
  @M.TTT.20 сағат бұрын

  updated my radio to openTX 2.3.15 and agent lite 0.98 and all seems to work now.

• 
  @amandal4905 күн бұрын

  Thank you!!!!

• 
  @MCsCreations6 күн бұрын

  Beautiful footage, dude! Really nice! 😃 Stay safe there with your family! 🖖😊

• 
  @nateboulter80410 күн бұрын

  Thank you so much! That was so frustrating and DJI says nothing about it.

• 
  @ALWA7SHSEXАй бұрын

  Where is the dvr image? Lol

• 
  @sandro9389Ай бұрын

  Do I only have to change the 500mW in the Tango 2 or also with the receiver with the TBS crossfire Nano? Thx 🙏

• 
  @ThunderFarterАй бұрын

  I click open but nothing happends

• 
  @johnraahauge45522 ай бұрын

  Have you had a chance to test the Phoenix UAS mRID module in a GPS Rescue situation? I have my gps receiver configured to use 57600 and 10Hz update frequency, but I’m suspecting that’s not what I’m seeing at the FC because when I try GPS Rescues, it seems jerky like the updates are too slow. I get the arrow pointing towards the home point and lat/long readout, but I’m suspecting the updates are not anywhere near 10Hz.

• 
  @nathanwebster28002 ай бұрын

  You're supposed to have an observer when you use fpv goggles or VR goggles by law quit breaking the law

• 
  @ArikCool2 ай бұрын

  I appreciate your very informative video!

• 
  @MCsCreations2 ай бұрын

  Long time, dude! It's great to see you! 😊 Thanks for all the info! Stay safe there with your family! 🖖😊

• 
  @5zero7RC2 ай бұрын

  Thanks! Trying to get back to making a few more videos again.

• 
  @mxgx5752 ай бұрын

  THANK YOU SO MUCH, this gives a huge advantage on giveaways and stuff

• 
  @liltoto3712 ай бұрын

  This is so cool omg😂

• 
  @Farfromhome_less2 ай бұрын

  GREAT VID STR8 TO THE POINT

• 
  @Farfromhome_less2 ай бұрын

  SUBBED BTW

• 
  @mikelbcn913 ай бұрын

  Came for the arm replacement, that part is not in the time-lapse? cmoooon! Just having the same problem, will be ordering some parts and see if I can get mine fixed....

• 
  @b2mljurjen5703 ай бұрын

  Hey, maybe I missed you saying this, but how do I keep track of the voltage lowering whilst riding my rc car?

• 
  @spb11793 ай бұрын

  Can you do something like this for 2.4GHz and explain some of the radio protocols like this?

• 
  @MystikSquash3 ай бұрын

  Can this be powered by the 3.3 pin output?

• 
  @CelikDastan-ww9cl3 ай бұрын

  HOBBYWING SKYWALKER closed-source ESCs are more carefully programmed than BLHeli closed-source ESCs and do not impose any additional costs on the user. BLHeli closed source ESC is a fake ESC that was accidentally and deliberately made with random signal values ​​and promises too much to customers. The ESC program written on social media by the company BLHeli, which also includes the construction of drones during calibration. Subscribing to chaos to get help from social media, which should not have a subscription fee, is another harmful dimension of being positive. Comments and quotes from some people support the confusion that BLHeli supports. After all, you are making an ESC and you have to present it with a value that should not be presented to the customer. Why so much confusion! ? All these people want is fake service. Entrepreneurs constantly have to purchase BLHeli products to complete their business. In addition, the complexity and cost of subscriptions, as well as the loss and waste of time, make customers miserable. Mr. Bill is a liar. Moreover, they are a terrible company and the services and products they provide to the people of this planet are literally miserable due to their fraud, insensitivity, exploitation, undermining development with silent terrorism, and disrespect for those who work hard. Economic damage to people's educational efforts. And BL Heli Corporation is a harmful company that destroys development. In the name of human development in the world, it has become inevitable for international authorities to seize all information and assets of companies and appoint trustees to these companies. In many countries, it has become mandatory to appoint a trustee for the information and assets of such companies.

• 
  @JulesOille3 ай бұрын

  My GoPro Max doesnt respond to any QR codes- nothing happens - I updated the firmware nothing.

• 
  @Kevin-mi2xj3 ай бұрын

  Appreciate the video but just a suggestion - you might want to get into the actual info quicker. It took you 4 minutes to really get into any rules and the first 4 minutes were just really repetitive saying the same thing over and over. This video is a few years old so maybe you have streamlined newer videos.

• 
  @maurogutierrez4 ай бұрын

  Hello, great, I have a 1W Tango 2 and an Iflight Helion with TBS Crossfire Diversity with Nano RX and the XF NANO RX option does not appear, I only see Tango II XF and Tango Wifi, Could you please help me, thank you!! ! 👍

• 
  @cjstewart79794 ай бұрын

  Hey there! Thanks for putting this together. I have an issue, hoping you can help. I don't have an option in BF10.10 for a 4.5-zulu firmware and I absolutely cannot get GPS to work on 4.5.0-RC2. Any idea what's going on?

• 
  @MyloMusica4 ай бұрын

  It doesn't detect my Mavic air 1 RC. Do i need to download a driver?

• 
  @BuddsSkyCam4 ай бұрын

  Have you been able to test out RTH yet over mps?

• 
  @5zero7RC4 ай бұрын

  I have not personally tested it, but I know others have, but you may need betaflight 4.5 for it to work... github.com/betaflight/betaflight/pull/13269

• 
  @BuddsSkyCam4 ай бұрын

  @5zero7RC yes i have tried it on rc2 4.5 and 4.5zulu.

• 
  @BuddsSkyCam3 ай бұрын

  @5zero7RC can you share any videos of it working? I cannot find anyone who has made it work and i just tried it again on a 3rd drone on 4.5 rc2 and the drone gets lost and cant find home

• 
  @DrDroneShotsАй бұрын

  @@BuddsSkyCam I'm having the same problem as you! I can get the GPS tab to partially work with GPS over MSP, but still can't see the quality of satellites. Whenever I arm (making sure I have plenty of satellites, usually 12+!), the OSD warns "RESCUE N/A", which means I GPS rescue won't takeover in the event of a true failsafe. When I activate failsafe via switch, it just hovers in place for 20 sec (and is of course blown by the wind) due to sanity checks. I noticed that telemetry and betaflight will recognize the number of satellites, but my OSD always says "NC", which I'm guessing means that the OSD parameter, which must be different than telemetry (?). Perhaps there's something there on why GPS rescue isn't working when using GPS over MSP with the Flite Test EZ ID. I opened a bug report on the betaflight github page, but I don't think the developer understood my problem. I'm curious what you think. github.com/betaflight/betaflight/issues/13484

• 
  @vikiller944 ай бұрын

  Awesome thank you!

• 
  @VikSim_VS4 ай бұрын

  I have problem, my file shows only gps coordinates, camera settings, but NO signal strength, channel and so on .. someone a hint ?

• 
  @hawaiiangunner4 ай бұрын

  I'd like to talk about the fact that I can go out right now and buy a ultralight airplane and fly anywhere I want just about without a license. These drone laws are absolutely stupid and only exists because the elite are worried people are going to video them without them knowing it

• 
  @RobsColoradoLife4 ай бұрын

  Thanks for the parts website!

• 
  @dylanceder-reinke53585 ай бұрын

  -10 in alaska today about to fly again, flew it last night in -5

• 
  @myfpvshots5 ай бұрын

  I have 2 fpv quads and bounded one by one. I used the first quad and changed to the second one. Do I need to rebind the second quad again?

• 
  @5zero7RC5 ай бұрын

  No, once you bind all the receivers in your quads you should be good. Any powered up receiver will get a signal from your radio after they are bound. So be sure to only have one powered up at a time! :)

• 
  @myfpvshots5 ай бұрын

  @@5zero7RC Thank you for your help :)

• 
  @AshTag5 ай бұрын

  This is extremely helpful. Thanks!🤗

• 
  @PremiumK9Krunchies5 ай бұрын

  Its pretty cold today.. take out the drone?

• 
  @5zero7RC5 ай бұрын

  No, I have not flown much lately. Too busy riding my fatbike in this nice cold weather. :)

• 
  @PremiumK9Krunchies5 ай бұрын

  @@5zero7RC That's awesome, I'm on the Mississippi near Albertville. And it's literally frozen over and not moving as far as visual. I took my drone out for some video I might post a short later

• 
  @seasonalvibez5 ай бұрын

  Thanks! Similarly struggled to get the dang things to talk to one another. Turned out I actually had to have the USB-C to USB-A female adaptor plugged in to the mac, then the USB-A male to USB-C pluggied into the goggles for it to work. Same cable setup flipped around (which was the recommended way on the general binding video iflight provided me) didn't work 🤪

• 
  @billwillson53615 ай бұрын

  How cold have you flown it in?

• 
  @5zero7RC5 ай бұрын

  I think this video is the coldest weather I have flow the DJI FPV drone in. So about -10F. I have flown other drones I have built in about -20F.

• 
  @FPVFRASHA5 ай бұрын

  I'm sorry to see that the drone flew down too close to your head and skimmed the top of it... close call your lucky is didn't hit you in the face and just took off the top of your hair instead... fly safe! drones are dangerous as we can see in this video! :O

• 
  @honestinjun866 ай бұрын

  This still doesn't work for me. Using a usb-c to usb-a adapter connected to usb-a to usb-c and still no connection. This is wildly frustrating.

• 
  @BuddsSkyCam6 ай бұрын

  There should be more shown in the gps tab. The gps tab should have info about each sat and yours is greyed out like mine. Once i switching to a separate gps from the ezid i then was able to see the data from each satellite in the gps tab. The way you have it setup does not work correctly and you will have your home point off even if you have 20 satellites.

• 
  @BuddsSkyCam6 ай бұрын

  Tried RTH and today and even though i had 20 satellites and it registered my home point this gps would not work correctly to fly home. Has anyone had the RTH function work via msp? Im thinking there is a lot more work to be done here.

• 
  @SIrrfuzz6 ай бұрын

  I broke my fpv my first time trying night flying luckily only one arm broke, im working on fixing it now just waiting for parts

• 
  @BuddsSkyCam6 ай бұрын

  You have the m8 version right? I got the new m10 version and am only getting 5-6 satellites and according to bardwell you need to do an update to the m10 for it work correctly. Do you know anything about the new m10 flit test module?

• 
  @5zero7RC6 ай бұрын

  Yes, I have the m8 version of the EZ ID. As far as I know the m10 that is part of the EZ ID should have all the updates applied before it was shipped.

• 
  @BuddsSkyCam6 ай бұрын

  @@5zero7RC this is the update, i think its because of the way betaflight is working with the m10 where the m8 already has everything correctly updated. kzread.info/dash/bejne/Z5p2ptOecdLXpqw.html

• 
  @TheMoonwatchers6 ай бұрын

  @BuddsSkyCam sort of BF4.4.x has too many dev mistakes and no support fro the M10 so it takes far longer for cold start. Use the better and safer BF4.3.2; GPS rescue is unsafe on BF4.4x in our opinion and we pulled it from all iFlight product that uses GPS - wait for BF 4.5 with full M10 support or just use BF4.3.2 that doesn't slow cold start as much on the M10. 4.5 is RC1 now release should not be too far. and its amazing with return to home and fast M10 support. too.

• 
  @BuddsSkyCam6 ай бұрын

  @TheMoonwatchers i was talking on the bf discord and was able to get 4.5 zulu updated yesterday morning and i went from 6-8 sats sitting in my house on 4.5 rc1 to now 10-12 on 4.5 zulu just have to make sure barometer is off. They are working on it but 4.5 zulu with baro on and gps on, the gps will not work. Spent all day yesterday chasing that issue, after the day before there was an msp issue when using gps but its working really well today and i hope to test the gps tomorrow in a bigger area.

• 
  @BuddsSkyCam6 ай бұрын

  Any Idea why when I select mps for my uart2 that its on that it removes everything selected from the ports tab?

• 
  @5zero7RC6 ай бұрын

  If you try to enable MSP on a 3rd or maybe it is 4th port, it will reset all the ports. MSP is not supported on that many ports. That's my first guess.

• 
  @BuddsSkyCam6 ай бұрын

  @5zero7RC i was going between your video and bardwells on gps m10 and i was selecting gps in tve ports tab after i clicked msp and that caused it to reset it.

• 
  @BuddsSkyCam6 ай бұрын

  What do the other pads do in the row of 7? Is there another ground and power?

• 
  @5zero7RC6 ай бұрын

  Not sure, but probably for the manufacturer to install firmware.

• 
  @femushy7 ай бұрын

  BIRB

• 
  @allesprobieren7 ай бұрын

  Highlights: 00:02 Tips for Flying FPV Drones in Cold Weather 01:36 Apply silicon modified conformal coating to protect electronics from snow and moisture. 02:50 Flying FPV drones in cold weather requires precautions to prevent fogging and moisture buildup. 04:07 Be cautious of changes in terrain when flying FPV drones in snowy conditions 05:48 Be prepared with warm clothing and accessories when flying FPV drones in cold weather. 06:57 Keep your batteries warm in cold weather 08:07 Using LED lights on your drone can make it easier to fly in dark and find it if crashed in snow 09:31 GoPro batteries don't last long in cold weather

• 
  @BuddsSkyCam7 ай бұрын

  Have you tried RTH with that setup on betaflight? Are you using this same method for INav?

• 
  @5zero7RC7 ай бұрын

  I have never tried to use INav. I have not yet tried RTH, but I do get good GPS coordinates in my OSD, so I assume it could work normally.

• 
  @BuddsSkyCam7 ай бұрын

  @5zero7RC wish they made these with the m10 gps.... would be cool to see how accurate it is with RTH is with the rfid. Thanks for make thia post you are the only one i have found to have and do this

• 
  @pieterjansenvanrensburg73227 ай бұрын

  i have 1w on my tango 2. new firmware installed yesterday. What output should i select. 250mw 500mw or 1w?

• 
  @5zero7RC7 ай бұрын

  Ideally, you would use the lowest power possible that still gets you the range you need. Unless you are flying many miles/kilometers away, you won't need 1w. Start with 250 or maybe 500 and get a feel for the range and adjust from there.

• 
  @globaldeception74147 ай бұрын

  Its 0.55 pounds and above... Please get it right

• 
  @danial16357 ай бұрын

  Very informative video, thank you. Which charger in your video at 6:33 has a graph feature ? I bought a SkyRc t200 after reading so many good reviews, but I would love a charger with more information through graphs than dual charging.

• 
  @5zero7RC7 ай бұрын

  It's a pretty nice charger, unfortunately it is no longer available. I think they stopped making it years ago. The label says it is a Hobby King X120-DC

• 
  @RedDirtStudios7 ай бұрын

  Thank you so much! You are doing good work!