Looking for Parts and Tools: Front Struts: Pairs USA: amzn.to/3gV1B8B Canada: amzn.to/3yFFNDY Drivers Side USA: amzn.to/31Y0OPy Canada: amzn.to/3qIKLzn Passenger Side USA: amzn.to/3Fr8Y1v Canada: amzn.to/3kDY7sY Locking Pliers: USA: amzn.to/3gSOhBK Canada: amzn.to/3jAXgt6 Flat Thin Wrenches: USA: amzn.to/3zB3gYo Canada: amzn.to/2WFhYiS

It’s videos like this that save money for people on a tight budget. Well done

@YouWrench

Жыл бұрын

Thank you! Yes, that's what we're aiming for. We're hoping that when we are able to save viewers some serious cash that they'll help support us in return with a small donation (www.paypal.me/youwrench or by hitting the Super Thanks option on KZread). The more support we get, the more videos we can produce! Thank you again! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Very well explained - thanks so much! I'm not the most mechanically inclined person in the world, but it's time to learn because there's no way I'm paying what I was just quoted for this job...

Thank you so much for making this video. I performed this repair today on my Town & Country. Your procedures worked perfectly.

@YouWrench

Жыл бұрын

That's what we like to hear!! And hopefully we were able to save you a few hundred dollars along to way too! Any support always welcome! www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

I have a 2018 Caravan sxt. I know many people talk bad about dodge and their vans but i love mine!! Leather seats. STRONG engine. Easiy to maintain. Drives fine for its size. Isnt the most refined car however for daily famiy life and work its great! 140,000 miles on mine and time to replace front struts

@zekemowad6501

Жыл бұрын

Awesome vehicles!!! We have a 2007 grand Caravan SXT. It truly is one of the best cars we have ever owned. And we have had many. This thing is incredible. Still going strong at 180,000 miles in 15 years in the harsh Pennsylvania climate

@geminislefthand

Жыл бұрын

Never thought much of Dodge/Chrysler but I bought a used 2008 T&C and turned it into a minicamper and drove it through some of the worst conditions, a lot of semi-offroad (meant for 4×4s only) driving while exploring the edge of civilization and this thing has been a champ! We got her at 187k and have had to replace a few minor things but she's still running strong at 253k..now, on to these struts.

Much easier than anticipated - thank you!!

Thanks for the great video! Very clear and concise. I especially loved the "but I'm doing the other side" part. I have noticed that a lot of how-to videos pick the easier side and leave it at that...then you're off other places in the middle of a tear down trying to figure out what to do next. Thanks again!

@YouWrench

Жыл бұрын

Nice to know that part is appreciated!! If we're doing both sides on a job we'll always try to film both sides and outline the differences (which there often are!) Like yourself, we feel it's an important aspect and a better experience for our viewers (who may be doing both sides too!). Thanks for your support! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Very very detailed video great job man 👍🏽 👌🏽

@YouWrench

2 жыл бұрын

Thank you! Glad you liked the video!! :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

I did this repair today. Thanks so much for the guidance! Different to the instructions in the video, I used a Torx bit in the middle of the stud for the anti-roll bar links to prevent it rotating and it worked a treat. Also one should expect a fair bit more difficulty in removing the aft upper strut bolts on the driver's side as the windshield wiper linkage is in the way. The sizes of all the bolts were 100% as described and the video gives a great overview of what is required. Thanks again @youwrench for taking the time and effort to film this.

@YouWrench

11 ай бұрын

Really glad to hear you managed to get the job done, and thank you for your kind words and support! 🙂

@GoatyHerps

8 ай бұрын

​@@YouWrenchWhat happens if this part spins?

One of the best and most completely detailed and clearly explained videos I’ve seen. Thank you, sir!

@YouWrench

Жыл бұрын

Thank you, that is much appreciated! We hope the video was helpful for you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

A Extremely helpful and thorough video!

I liked the specific detailed instructions which made it very easy to follow along. I actually had the work done by my mechanic but it is good to know how to do it. Great video!!

Brilliant! Every other video of this task said you had to remove the wipers. I tried to gain access to the top of the struts as recommended in this video and it was ridiculously easy, just as shown. Thanks for sparing of me of needless effort and time.

Pro tip: OK not from me, but I watched the windshield guys just rock the windshield wipers loose after taking out the bolt. I had no Idea and always fought them like everyone else, was slick. Good video, thank you!

Very useful thank you so much made my day so much better.

Thank you This was very very helpful

Great video man Thank You for spreading the Proper Knowledge of how to 👌🏽 👍🏽

@YouWrench

2 жыл бұрын

Glad it was helpful for you :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

This is a great video. I like how you explained everything you did and why, I’ll definitely hit that subscribe button.

@YouWrench

2 жыл бұрын

Thank you, glad that you liked it and really appreciate your support! :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Perfectly explained. Thank you

@YouWrench

Жыл бұрын

Thank you! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Nice video. Was part of my FYI research for replacing my struts to make sure there wasn't something funny with these. Replaced both front struts and sway bar links today and both rear shocks with zero issues. I was happy that my replacement struts were like OEM with set holes not lower slots like ones in the video so it does not have a camber alignment that's needed. Since I didn't touch the tierods, no wheel alightment required. Took it for a test drive and it drove straight as an arrow!

@out_of_ideas_for_username8707

5 ай бұрын

What is the brand of struts you used?

Thank you for the video.

The strut bolts are SPLINED.😉 Great presentation!

@YouWrench

5 ай бұрын

That's the word 👍 ----------------------------------------------- To help support us: 1) Please be sure to use our Amazon Links! 2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel! 3) Donations always welcome! Hit the SUPER THANKS option below the video on KZread, or by PayPal: www.paypal.me/youwrench Thank you for your support!

Excellent video easy to follow .

@YouWrench

2 жыл бұрын

Thank you! :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thank you. Great video. I think I can do this myself now if I want. I would not have the confidence to do so otherwise.

@YouWrench

2 жыл бұрын

Awesome! That's exactly what we like to hear!!! www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Awesome video! You came out with this just in time to replace my own struts!

@YouWrench

2 жыл бұрын

Perfect! Glad we were able to help :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thanks for and excellent clear concise video.

@YouWrench

Жыл бұрын

Glad we could help! www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Dude. You just saved me a huge headache with that plastic cowl tip. I hate how these things are designed.

@YouWrench

4 ай бұрын

Glad we could help. Yes, removing the wiper arms is completely unnecesary for this job. Doing it this way makes it a lot easier 👍 ----------------------------------------------- To help support us: 1) Please be sure to use our Amazon Links! 2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel! 3) Donations always welcome! Hit the SUPER THANKS option below the video on KZread, or by PayPal: www.paypal.me/youwrench Thank you for your support!

Great video. thanks!

@YouWrench

2 жыл бұрын

Thank you! www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thx for this great installation video. Question: where can i buy 3” Lift kit for 2010 Ram Grand Caravan and do you have a video on this. Thx again.

Thanks for sharing 👍 😊 😀 🙂 🙏

Very good job thanks

@YouWrench

11 ай бұрын

Glad we could help 🙂 --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Sometimes these videos give us enough info to know this is one to give to the shop!

@YouWrench

2 жыл бұрын

Lol, absolutely! DIY car work is not for everyone! But can save you a lot of money! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thank you, appreciated

Love your video series for the grand caravan! Saved me a lot of time.

@YouWrench

10 ай бұрын

That's great, we hope that we've also managed to help you save a lot of money along the way too! Any support in return is very welcome, remember the SUPER THANKS options below our video's ;-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on KZread, or by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you SUBSCRIBE to our KZread channel. 3) Please LIKE our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thanks.

Great video

@YouWrench

2 жыл бұрын

Thank you :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Do you have a dedicated video for changing swaybar links?

Excellent instruction! Thank you. By chance, will you ever sell t-shirts? Your logo is great.

thanks!

Thanks!

@YouWrench

11 ай бұрын

Thank you for your support!

Nice video

@YouWrench

2 жыл бұрын

Thank you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

When tightening the strut mount bolts (x3 bolts), should this be done once the wheels are loaded and touching the ground ( k=0)? Or perhaps they should be tightened first, and then torqued once wheels are touching the ground? Thank you

Just a word to the wise, don't go cheap on the strut assemblies, it's a job you don't want to do again for a long, long time. By a good name brand like KYB, or Monroe Senatrac etc. You'll be very glad you did.

Would leaving the wipers in the up position help with driver side access?

Do you need cam bolts with these aftermarket struts?

If the sway bars are original then you may as well replace them too. Here in the Rust Belt, they have to be cut off anyway

Hi, can you explain the purpose of torquing the lower strut mount bolts, and then adding a 90 degree turn?

@YouWrench

2 жыл бұрын

This is fairly common these days with various bolts all over your car. It is a way of ensuring proper 'stretch' in the bolt, and tends to be a little more 'accurate' than just doing it by torque value, hence the manufacturers often prefer to do it that way. This spec is direct from the Dodge workshop manual. Hope that helps! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Wasn't sure how or where to message this...for future vids, any chance you could do on one where the jack points are on 2013 dodge grand caravan for floor jacks and jack stands?

@YouWrench

2 жыл бұрын

Yes, that's a decent idea! We have a lot of content already lined up, but I can definitely see us looking at this in the not too distant future!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Do both wheels need to be off the ground to do this repair?

Bonjour, merci pour vos vidéos, elle sont très intéressantes?? À quel endroit je peux savoir ou obtenir le torque de chacune des boulons nous avons à serrer sur nos véhicules?? Merci à pour votre attention.

Awesome video sir. Was wondering what "symptoms" you were having to make you replace strut. I have a loud rattle/clunk noise over every single little imperfection in the pavement.

@YouWrench

Жыл бұрын

Thank you! This strut was replaced due to a broken spring. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

@ryanjetton

Жыл бұрын

I have this exact same noise. I am gonna try this, I hope it fixes the problem

@rjcolombe

9 ай бұрын

More than likely a tie rod and/or ball joint. I'd inspect those before replacing the entire strut assembly.

Hi, this is an excellent detailed video.. great job! I purchased the same struts for my Grand Caravan and after installing my front sits significantly higher....like 2 inches higher than rear. So I replaced the old rear shocks with Monroe OEspectrum hoping it would help balance it out a bit but the front still sits way too high. Its also very noticeable when stepping into the vehicle. Did you have this problem with your van also?

@YouWrench

2 жыл бұрын

Thank you! They will generally sit a little high upon install, but they *should* level off fairly quickly (i.e. a few days of driving). It could be a slight combination of your old ones sitting a little lower than they should (due to age/wear, or especially if you had a snapped spring!), and the new ones sitting a little high so the visual difference is 'doubled' (if that makes sense). On this car, they were notably sitting a little high on install (but I wouldn't say two inches!!!) but looking at the car recently the suspension now looks nice and even all around so they definitely have levelled off. Springs will settle, and so it's common to sit a little high immediately upon install to allow them to bed in. If they were at the 'bedded in' height immediately then chances are they would sag to be too low relatively quickly as the spring settles. Keep us posted! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

@saticonthree5050

2 жыл бұрын

The non factory replacements are probably just a little bit longer than the original and also longer than exact replacements. I saw another video on this (Scotty Kilmer) where he measured them side by side and found the difference. Not a problem really unless you just don't want the extra height. The main thing I would focus on is the replacement is sure a whole lot better than the original if the original was worn out. Exact replacements are also like over $700.00 each for some cars!!

@chuckholmes2075

Жыл бұрын

see my reply above. NEVER get spring/strut combo's they will always ride differently. reload it yourself using the factory OEM springs

Would turning on the wipers and then stopping them in the upright position by removing the ignition key help with the cowl flexibility?

@YouWrench

2 жыл бұрын

Possibly, but it's really not required. There's plenty of space on both sides to get your hand and wrench in there. Access is actually pretty nice on the Grand Caravan for the top of the strut. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Hello, a question, are the shocks and coils the same in the 2008 to 2018 dodge caravan models? or is there any difference?

@edgardorivera617

2 жыл бұрын

The same

Any feedback on how these struts that you linked are performing? Worth the price?

@YouWrench

2 жыл бұрын

Actually they're pretty good. No issues with them at all. I don't suspect that they would last as long as the genuine ones, but they are a fraction of the price. For the price these offer excellent value. Hope that helps.

Can you explain a bit why you gave the lower mounting bolts an additional 90 degrees of turn AFTER getting to the specified torque setting? Wouldn't that significantly over-torque the bolts?

@YouWrench

Жыл бұрын

Hey there! Yes, actually this is very common, for all makes and models of cars. This torque spec is taken directly from the Dodge workshop manual. It's to do with bolt stretch, and also torque wrenches tend to be more accurate in the lower to mid ranges, and can be damaged if you over torque them. So the idea if to torque to the spec, and ideally the remaining 90 degree's would be done on a breaker bar (if likely to be outside of the maximum range of the torque wrench). Hope that makes some sense!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

@dragknt

Жыл бұрын

@@YouWrench thanks, that does make sense!

Great video. Any chance you can show us how to change the fuel filter?

@YouWrench

2 жыл бұрын

Maybe in the future! We have a lot more great content coming, and will continue to come provided we get the support from our viewers! Any support much appreciated: www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Some other how to videos showed removing the wheel axle nut. Is there a reason you didn't remove?

@kirkdarling4120

13 күн бұрын

The instant the wheel is free of the bottom strut bolts, it will want to fall outward under its own weight. If it's allowed to fall freely, it will pull the drive axle out of its spline...then you've got a real problem on your hands...that's going to be a tow to a shop. Removing the axel nut will allow the wheel to fall off freely without pulling the axle with it. However, what did (just this afternoon) was to put my jack under the brake disk (put a rag under the disk to cushion it) and use the jack to lift its weight up so it wouldn't fall.

I need to do this job on my 2014 Grand Caravan Crew. What are your thoughts/impression of those aftermarket struts now that you’ve had them on for 6 months? Worth the savings?

@YouWrench

2 жыл бұрын

Actually they're pretty good. No issues with them at all. I don't suspect that they would last as long as the genuine ones, but they are a fraction of the price. For the price these offer excellent value. Hope that helps.

@loucifer4205

Жыл бұрын

With aftermarket strut assembly it's hit or miss sometimes they are so bad that the old struts are better

In your search for struts for this van, did you see any upgrades? Anything to improve the handling?

@YouWrench

2 жыл бұрын

TBH, not really. They tend to be the cheaper and more generic solutions that are available. The Grand Caravan/T&C is hardly a great handling car to begin with, so not sure how big the improvements would actually be handling-wise even if there was something available. We're a long way off of sports car handling here ;-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

@Torsee

2 жыл бұрын

@@YouWrench I’m bringing boxy back! The sleeper you know. With 284 horspers..the seats stowed to the floor. It’s just a box of air weighted on one side.. 😂 Just grasping for straws here!

So what is the correct torque value on those nuts?

@YouWrench

Жыл бұрын

Hey there! Please see 17:08 - it's in the video :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Cannot find the DIY alignment video??? Thx,

@YouWrench

10 ай бұрын

We're working on it, but it will be w hile longer as quite a complex video. Thank you for your support! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on KZread, or by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you SUBSCRIBE to our KZread channel. 3) Please LIKE our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

I just priced these out yesterday at $260 USD. EACH. For the KYB

@YouWrench

2 жыл бұрын

Please try using the Amazon links in the descriptive text (also below for you) as explained in the video. USD $182 PER PAIR (CAD $264 PER PAIR). Around 1/3 of the price of the ones you priced up. LINKS HERE: USA: amzn.to/3gV1B8B Canada: amzn.to/3yFFNDY --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Subscribed! Awesome video. If I lived in your town, I'd bring all of my auto repair work to You Wrench. Saved me a ton of time and cash. I had Shops quote $1,500 to $1,700 to replace front struts and rear shocks. I purchased: $302 Monroe struts & shocks (Amazon) $65 Craftsman torque wrench (Sears) $85 Floor jack 2 1/4 ton and Jack stand combo (Auto-zone) $807 set of 4 Goodyear tires and front end alignment. (Action Gator Tire) Total $1,259 Basically got a free set of Goodyear tires and saved $441 by doing it myself with You Wrench's help. ✌

@YouWrench

Жыл бұрын

That's AWESOME!!! That is exactly why we produce these video's - to save people hunders of dollars, just like you!!! Don't forget that we welcome any donation in return and they ensure we can continue to bring more and more content to the channel. If you fancy helping us out in return: www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

@banditoincognito8950

11 ай бұрын

its quite an investment but now you have the tools to do future jobs.

Just did this today. It's so dumb that the hardest part of the job is getting the wiper arms off.

But wait whats up with the bottom bolt the hole is oval! So you gotta do an alignment on cambers?!

@YouWrench

4 ай бұрын

No, you should find that there is no flexibility during the install as the main bolt locks the angle in one direction, and then the second bolt passes through the slot and cannot move up and down the slot, and the movement in the other direction is locked by the width of the hole. However, the oval does ALLOW for camber adjustment, but you will need special bolts (camber adjustment bolts) if you want to change the camber position. Without the special bolts the position will be locked (not adjustable, or certainly not as easy to adjust). All that said, you should expect to have to do at least a wheel alignment after changing major suspension components (as outlined in the video). Hope that helps! 👍 ----------------------------------------------- To help support us: 1) Please be sure to use our Amazon Links! 2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel! 3) Donations always welcome! Hit the SUPER THANKS option below the video on KZread, or by PayPal: www.paypal.me/youwrench Thank you for your support!

Good video... but people the Caravan is a front heavy vehicle... do yourself a favour and don't buy the cheapest strut assembly, get yourself something OEM or better. You don't want to do this every year.

this van is made of 100% chinesium grade metals. everything brakes on it, all the time.

@YouWrench

10 ай бұрын

Yes, I agree on materials. Some of the materials (but not all!) used on these are terrible. Hose spring clamps immediately come to mind, we've had lots of those cause coolant leaks by losing their ability to clamp. You open up the spring clamp and it just snaps in half. Complete garbage. BUT you need to remember that these cars were pretty (comparitively) cheap to buy brand new, and you do sometimes get what you pay for. But those clamps really annoy me, costing people hundreds of dollars in repairs to save what, 5c a clamp? Just add $5 to the price of the car and put decent clamps on it!! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Can you please tell me how you like the auto shack shocks. Is the height ok. They’re the cheapest ones I can find. But I’m curious how they will fit and work.

never get spring and strut replacements unless it OEM factory. I made that mistake once. IT NEVER RODE THE SAME. it was spongy. sat differently. i'd rather get a reload and compress the factory spring. only a little more work but it's worth it

Thanks!

@YouWrench

Жыл бұрын

Thank you for your support!!