How to Replace Front Wheel Bearing Hub Assemblies 2008-2020 Dodge Grand Caravan
Автокөліктер мен көлік құралдары
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00704
This video shows you how to install a new wheel hub and bearing on your 2008-2020 Dodge Grand Caravan. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan
Tools you will need:
• Pry Bar 1aau.to/o4E/1AXAA00020
• 10mm Socket 1aau.to/obxu/1AXAA00017
• 15mm Socket 1aau.to/obUb/1AXAA00015
• 19mm Socket 1aau.to/oaxf/1AXAA00043
• 21mm Socket 1aau.to/oaxf/1AXAA00043
• 32mm Socket 1aau.to/odA/1AAST00003
• Brake Caliper Hanger 1aau.to/ok6/1AXAA00439
• Trim Tool Set 1aau.to/oaqe/1AXXX00006
• Ratchet 1aau.to/obW4/1AXAA00016
• Socket Extensions 1aau.to/obUb/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaZP/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oaKr/1AXSS00048
• Safety Glasses
• Center Punch 1aau.to/omU/1AXAA00055
• Floor Jack 1aau.to/oao4/1AXAA00068
• Jack Stands 1aau.to/oabq/1AXAA00065
• Large Hammer
• Wheel Chocks
• Wire Brush 1aau.to/owt/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 14
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
Lug nut torque 100lb, wheel bearing bolts 37lbs, center bolt 118lbs, caliper bolts 125lbs,
Thanks very much for this vid. I have watched my father changing the wheel bearing on his DGC. Now it's my turn to do it on mine by myself. Thanks much. Update : I did the job by myself today thanks to your video. Removing the old bearing was a pain in the a** but once I did, everything went smoothly. I locked all the bolts and nuts according to the info you provided. My Caravan is a smooth ride. Thanks again.
Thank you for this easy to follow video and stating what’s needed and the appropriate specs for tightening. Life savers.
I was so sad to see that old rotor put back on, just to notice a new one in the next frame ;) lol thank you for this... need to change my bearings out
Very easy to follow. Thanks
Great job on the completeness of the video
Great vid! Thanks for the help!
Great video, thank you!
how important are the shims? what can happen without them? i was just informed mine are missing!
You forgot the step where you go through every puller, bar, and hammer in your box, your buddies box, and the rental shop when the axel doesn't slide out like you had it apart yesterday lol. I turned wrenches in Ontario half of my life, in Ontario it felt like every bolt on every vehicle was welded on with rust and corrosion from all the damn salt on the roads. J/k aboyt the pullers though, for anyone who doesn't know, don't actually bother with any if that, loosen the axel nut (but leave it on) and in a parking lot or...wherever you have to (preferably not a busy road) drive it like you're drunk, swerve a lot or, drive in some circles/figure 8s. A couple minutes of that and it should slide out like this one did for him.
Does this Bearing hub assembly 214AA 47439 1221 b GTSI fit in caravn 2010 3.3L, Thanks
What do you do when you can’t remove the old wheel hub after you’ve taken all the screws out?
Use the 4 bolts to press the bearings in.