Very easy to do & saves you money! Enjoy :) Seeing the glass on eBay between @ $60 & $160
Жүктеу.....
Пікірлер: 387
@imthatguypal_ Жыл бұрын
Quick, easy, straight to the point. The best kind of videos, thank you.
@buddyrebel_Garcia
Ай бұрын
LOL, OK.. I SEE THESE COMMENTS ALL THE TIME. WE GET IT, ITS A A GOOD VIDEO. GEEZ
@jjpuck23 жыл бұрын
Quick, direct, informative. Good tip on the foam gasket. Thanks for making the video and not letting life slow you down! Well done.
@marinp29383 жыл бұрын
A million times over- thank you!!!! I was able to remove the old broken mirror and now just waiting for Amazon to deliver my new one for less than $50.
@ansdguy15 жыл бұрын
Just today I replace a shattered passenger side mirror on my low miles 2006 Caddy CTS Sport Luxury. The mirror and backing was under $20. I had already peeled off the glass and foam backing before the glass arrived. The mirror had separated by the blow it took. I had decided to use my truth all around tool, my heat gun. A little scraping and a lot of GooGone. I did see where I was supposed to alloy the glass right over the broken mirror. That would look awful, though. My method looks factory. I did enjoy you video because it made me feel seriously clever!
@LaneRanger11 жыл бұрын
Thanks for posting this. It helped me to install a non-heated and non signaled version of this mirror glass only in a 1999 Chevy Silverado. I had no instructions and could not find any until your video popped up on You Tube! Again thanks for posting this !
@AxelOman312 жыл бұрын
Thanks, saved me time. I bought my mirror on Ebay (used) for $125 and used your video to install it.
@brutus70812 жыл бұрын
Man your the man doing it with one hand!!!! Thanks for the tutorial!
@kenmynatt2049 жыл бұрын
Thank you so much! Watched your video and then went and replaced the passenger mirror on my 08 Suburban. No problems.
@aaronwilson46946 жыл бұрын
Thanks man! I got a Hyundai sonata hybrid and I didn't know to remove the mirror until after I watched your video.
@gregordal985810 жыл бұрын
Thank you for doing this. I have to do this to my 2002 Chevy Silverado that has the drivers side mirror broken. I called a few repair places to hear them say that it couldn't be replaced without the whole housing. I found your video and can see they are full of crap, it is indeed out there and easy to do yourself so you are not taken advantage of by a repair shop. Thank you again.
@lawrencebernal88725 жыл бұрын
Found one for $20 on eBay, probably won’t last but it’ll work for now.. I thought I had to change out the entire side mirror assembly until I found your video.. Thanks a bunch brother! Saved me $$$...
@rgh353811 ай бұрын
Thank you, my mirror for a 2003 Chevy Silverado Truck has turned a hazy yellow color, now I know I can just replace it!
@vincentwashington11939 жыл бұрын
Worked like a charm. 2 years later. Thanks.
@jeffsyellow8 жыл бұрын
Thanks so much for adding this video, Yours was the first one that I found because you took the time to make one on this subject. I have a 2004 Chevy Avalanche and broke the mirror part but not the housing so, this video on just replacing that part was awesome! I hope that you recover fully and I look forward to your next one, Thanks so much!
@jrmcd195710 жыл бұрын
I really thank this Man for doing this video and I hope he doesn't mind my input to help. The car manufacturer did not care they were very ready to throw me as the customer under the bus after I spent $50thousand to buy the car and make all kinds of drama to just give the person the part number strong arming a sale a a ridiculous amount of money on this item. For even the sake of recycling that this world is in need of please give us the part numbers while good used parts that can help.
@gregoryandmandy70688 жыл бұрын
OH thank your for posting this. I just broke the mirror on my tahoe and the dealer told me $500 just for the part. Thank you so much for this!!
@Ltaylor19863 жыл бұрын
Sorry to hear that you had a stroke. Thank you for the awesome video because all I was getting told is i will have to buy the whole mirror Assembly and I would have to get repainted.
@DansGrandValley3 жыл бұрын
Thanks for this! I got a replacement glass for $14 on eBay for my Tahoe.
@jimjesus44792 жыл бұрын
Hey bro, thanks for posting this. Keep on trucking bro, hope you are recovering as best you can.
@OpasJDGarage12 жыл бұрын
thanks for taking the time to post this - it helped.
@clockman4711 жыл бұрын
I just wanted to say thanks for the information u saved me hundreds of dollars. keep up the work of helping people, THANKS a Friend in Georgia USA.
@MACEPAK5 жыл бұрын
Thanks Brian, great video presentation. I too saved hundreds by buying the glass for my 05 Avalanche on eBay for $14 and using your instructions to replace it. My glass cracked from behind when using power folding feature in sub-zero temps. There's no excuse for not knowing how to use a screwdriver. Saved $280. Thanks again and be well brother.
@s217403 жыл бұрын
Thank for giving me the confidence to do it myself. Ordered mirror from Amazon and will install the first warm day.
@KayHudasch9 жыл бұрын
Thanks - that was easy - got mine for $72.00 on Amazon (heated and turn) for my 2006 Chevy Avalanche - thumbs up
@kenenglish6647 жыл бұрын
I never ever done this before, It took me 30 secs longer than the video showed me!!! Super!! Thx
@realfaux73339 жыл бұрын
Thanks, great video. Sorry to hear about your stroke.
@M.V.P764 жыл бұрын
Thank you I was trying to figure this mirror thing out .for a year I didn’t know you can only replace the glass mirror thanks.you did it with one one hand and holding the camera you are the man thanks for this great video 💪🏻👍
@longvanilla6 жыл бұрын
Thanks, Brian. Great video. Nice and easy instructions. The little tabs that came with my mirror for the heating element were a bit too wide so I ground them down a bit with my grinder. Whole job took 10 minutes. Thanks again.
@DagarothBlackrose7 жыл бұрын
I was wondering if I could just pop it off, thanks man, saved me a lot of time
@DannyPRobinson10 жыл бұрын
A really useful video, thanks for posting. I'm in the UK, I have a German built Opel Vectra which, like your Chevy, is a GM car. The mirror fittings are very similar. No double sided sticky pads, just a series of clips arranged in a circle and two electrical connections. I'm replacing the glass on the drivers door mirror tomorrow, it was good to watch you doing this so I could see how the clipping-in works. No gasket came with my glass, which cost me only £9 including postage off eBay.
@georgescotland73938 жыл бұрын
Brilliant! So clearly explained and shown...AND with one hand. Thanks..
@utubewatcher36011 жыл бұрын
Thanks for making this video, you help guys like me who are not mechanical at all.
@rororossah10 жыл бұрын
Dan- Thanks for making this video. I saved a ton of money doing this myself, and your video made it really simple! -Rick
@chewy98ta284 жыл бұрын
I'm amazed it popped off and on that easy. Got a new mirror on EBay for $13.80 heated but luckily I don't have the turn signal option.
@kthoennes7 жыл бұрын
Thanks very much, this was very helpful for my 2003 Escalade. Got a new glass and frame on eBay for $27, saved a bundle.
@mendo61
4 жыл бұрын
kthoennes I have an 03 Escalade as well and wondering if procedure is the same as the video. Any hints welcome. Thanks
@pdeblois18809 жыл бұрын
Kudos man.....you deserve a lot of credit for your efforts. Stay well and good luck.
@lbsportswriter9 жыл бұрын
Thanks so much! It's always so nice to have this as a great resource....
@TheTomG1005 жыл бұрын
Master DJ & Master mechanic , Wow, another very helpful video Brian ......Thank you
@zztopperman5 жыл бұрын
Thanks for the video. I saw a different one saying to peal off the back part of the housing, which could end up messing up the housing....so I like your way much better! Found aftermarket replacement for $18, so I will order the part and use your magic ! Thanks so much!
@sdy017410 жыл бұрын
thanks,this video saved me some major bucks
@ErnieLA-3 жыл бұрын
I need one for a 2005 Z71 Chevy Suburban driver side, Great Content, subscribed for 3 years now, WILL practice and enjoy 😉
@mattevans44386 жыл бұрын
Adding sequential turn signals to my 2012 Chevy Equinox. Same procedure to get the glass off. Thanks for the video!
@Isaac8629 жыл бұрын
If your vehicle is a bit older or you're having trouble locating replacement glass, go to a local glass or mirror shop, and they will make a template and cut a new piece of glass from scratch. Did this for our 96 Suburban and the shop only charged $20, now the mirrors good as new.
@micmic94108 жыл бұрын
You're awesome I was looking for specs to this this morning.. Yes, I am a mechanic but I read instruction before doing anything. Thank you
@marksmuddyjeep8 жыл бұрын
Thanks Brian. Pretty much how I thought it would go, but it's awesome to see the repair done first.
@BroJJ11 жыл бұрын
Thanks million! Like you, I had a stroke three years ago and replaced it with one hand. We're to damn young to have any strokes other than a bad game of golf!
@carlad.c40786 жыл бұрын
Excellent. Video I put mines on by watxhing your video and one thing i will like to sharr is that i got my heated mirror with the signal sign on ebay for $25.00 it was on sale from the regular price of $34.99. Gos Bless and Thanks again.
@christopherhuber25173 жыл бұрын
Thanks for the info. It jogged my memory. You da bomb
@brewerbi5 ай бұрын
This worked perfectly on my 2003 Tahoe. I bought a replacement glass on line` for less than $20.00.
@maxj92048 жыл бұрын
a lot of the stuff on these vehicles is just pry off/pop on... it's always good to confirm which bits there are though. good to know!
@DannyShanna11 жыл бұрын
Thanks. You got a good deal; the cheapest we found was $115.
@raymondfulton47168 жыл бұрын
Thanks very much. You have a wonderful attitude that inspires.
@CREEPERAIRSOFT11 жыл бұрын
About to do the same on our 01 YUKON. Same mirror without the blinker. Thanks so much for the video. Great job!
@Toby-bq1eq7 жыл бұрын
just what I needed to see. thanks, buddy
@georgegretser21786 жыл бұрын
Worked like a charm - thanks for posting
@lanz6374 жыл бұрын
Great Video! I've been looking for some guidance to replace my side mirror glass and most of what I got shows you how to remove the entire housing or scrape the shards off and paste a glass without a backing plate. All I want to do is to remove the broken glass on its backing plate and pop in the replacement one. That's exactly what you did. Now that I know that prying it with a screw driver wont break it...I'm gonna go ahead with confidence. Thanks Brian!
@mikesmith56838 жыл бұрын
Thanks for sharing this video, made my life very easy! 15 minutes and it was done
@keithfinnerty18346 жыл бұрын
Very helpful and that was just the info I was looking for. Thanks much
@soydeguamuchil9 жыл бұрын
Thanks my friend, this video is exactly what I was looking for.
@mr.beachwalker71545 жыл бұрын
Thanks buddy. Getting ready to do this. Much appreciate the informative post.
@glenhurley939610 жыл бұрын
Thanks! I never would have figured it out! Going to order mine on line now...
@Sherchezlafemme9 жыл бұрын
Thank you! I have same mirror, no instructions anywhere. Now can do myself!
@tailgatercsd12 жыл бұрын
If you think about it this is still a dj video. A car is a tool you use for your equipment. Nothing like rolling to a gig with busted mirrors. No way keep professional. Thanks for sharing Brian.
@donnygreen545311 жыл бұрын
Great tutorial! Couldn't find out how to replace this anywhere on the net. Thanks
@burtonkidd10 жыл бұрын
thanks for the tutorial Brian, added some LED blinkers to my '01 sierra, tricky part was to remove the glass without breaking :) used a long flat head and popped about 6-7 tabs and then it just came right out.
@alexsayers69798 жыл бұрын
awesomeness that is a lot easier than I thought! thank you!
@michaelgoulding87857 жыл бұрын
Nice. Just the information I needed to replace mine. Thank you so much!
@Raymo853inLeDroit10 жыл бұрын
Thanks for posting this, helped me save a bundle
@christinedixon92876 жыл бұрын
thanks for sharing! have been looking for instructions on how to replace a broken side mirror!
@julioescobar55406 жыл бұрын
Ty for the video, just what I was looking for.
@carlosmitchell35307 жыл бұрын
Brother, this is soooo helpful. Thanks,
@mmmmmmmm95110 жыл бұрын
Thank you for the video. I just came home from the store where they stole my side mirror glass from my suburban. Glad to see it can be replaced fairly easy. Thanks again for the video tutorial.
@lennystiles7675
2 жыл бұрын
Same thing happened to me. One thing I forgot to do is etch "F@&k you" in the back of the new mirror in case it happens again.
@Gilabreeze12 жыл бұрын
'Thanks, you just saved me a lot of time and frustration. I just backed my 05 Yukon's mirror into a concrete decorative awning and cracked the damn fancy mirror with signal and heat and xray vision built in. I bought the replacement part on ebay for $168 Kool Vue CV49GL-S. I appreciate the effort and quality video!!! Thanks again. WT
@mbeebs7611 жыл бұрын
Looks easy. Here I go to give it a try. Thanks, man.
@leo1heart10 жыл бұрын
Really good tutorial! You helped me out tremendously.
@2000recurve7 жыл бұрын
Excellent video. I got an Avanlanche and it's on the passenger side but this is exactly what I needed.
@Nitronerd9 жыл бұрын
Helpful tutorial. I have a 2003 Silverado 2500HD. The mirror glass is heated, auto-dim with turn signal (3 electrical connections). I found a replacement glass at Discount Body Parts. Saved $250+ over GM OE. Fast shipping, high quality Kool Vue OE replacement. Went on in a snap (Pun intended). Thanks for posting this video.
@robertlopez1734
9 жыл бұрын
Where did you find your replacement glass at? thanks
@Nitronerd
9 жыл бұрын
Robert Lopez As my reply states, Discount Body Parts. Part #: CV49GL-S.
@robertlopez1734
9 жыл бұрын
Thank you!
@richardleino12 жыл бұрын
Thanks so much for the video. I found right mirror glass and plan on installing myself...
@BobGSouthPhoenix8 жыл бұрын
Thank you brother.....good piece right here. Really appreciate it
@bruceblair4197 жыл бұрын
I had a left side stroke, so I will try with my right hand, great information
@bruceblair419
7 жыл бұрын
Took 20minutes with help from my son. Pretty easy, took two hands from my son to disconnect the plug. Easy brezzy
@etaylor70411 жыл бұрын
thanks for the post…i have to change mine today and had no clue what to do.
@juliawhetten11 жыл бұрын
Thank you! I'm ordering my mirror today and getting her done :)
@euseagle11 жыл бұрын
thanks man you did a great job i have fix mine thanks to you video
@bryanmansfield97276 жыл бұрын
Thank you for adding this video!
@Disturbedearth110 жыл бұрын
Damn. I was stressing about this. My 2500 HD got water behind the film somehow. Don't wanna go into winter that way. Pretty sure you saved me. Thanks brother! Pretty sure I can handle it now! God bless.
@tripower53473 жыл бұрын
Great job, Thanks for posting this !!
@leahcorrethers65917 жыл бұрын
thank you I just broke the side view mirror this morning...totally shattered backing out of my garage...part ordered...I'll install it myself or my boyfriend will...thx!!!
@soccerdude6019 жыл бұрын
This is a big help.
@DannyPRobinson10 жыл бұрын
Job done! As briansredd says, it is so easy. It took me a few minutes. With some GM cars, such as my Vectra, there is a little metal clip which you need to prise out of the old mirror and pop it into the new one.
@johnnyceeuontheroad.23892 жыл бұрын
You da Man Behind The Man. 💪
@chuckstertv10 жыл бұрын
Thanks for the great video. Had a hard time figuring this out.
@nikkidiamond38435 жыл бұрын
Thank you! I just fixed my own escalade mirror for 20 bucks
@drummin5159 жыл бұрын
Thanks so much! I have to do this on my '02 Yukon.
@janaitaboone768 жыл бұрын
Great Job!!! Very cost effective!
@AppSkii8 жыл бұрын
Yooo thank you so much bro!! Saved me 280!!
@bystander6653 жыл бұрын
You’re a rockstar! Thank you!!
@5Nivram6 жыл бұрын
Thanks for the video i was about to buy the whole mirror because the mirror has a haze which makes it useless. Thanks my friend God Bless You
@007jjb5 жыл бұрын
Thank you that was exactly what I needed
@peteiesmckee43999 жыл бұрын
Thanks for this video. Now I can do it myself.
@garrettanderson503011 жыл бұрын
Thanks for the video man, sorry to hear about the stroke.
Пікірлер: 387
Quick, easy, straight to the point. The best kind of videos, thank you.
@buddyrebel_Garcia
Ай бұрын
LOL, OK.. I SEE THESE COMMENTS ALL THE TIME. WE GET IT, ITS A A GOOD VIDEO. GEEZ
Quick, direct, informative. Good tip on the foam gasket. Thanks for making the video and not letting life slow you down! Well done.
A million times over- thank you!!!! I was able to remove the old broken mirror and now just waiting for Amazon to deliver my new one for less than $50.
Just today I replace a shattered passenger side mirror on my low miles 2006 Caddy CTS Sport Luxury. The mirror and backing was under $20. I had already peeled off the glass and foam backing before the glass arrived. The mirror had separated by the blow it took. I had decided to use my truth all around tool, my heat gun. A little scraping and a lot of GooGone. I did see where I was supposed to alloy the glass right over the broken mirror. That would look awful, though. My method looks factory. I did enjoy you video because it made me feel seriously clever!
Thanks for posting this. It helped me to install a non-heated and non signaled version of this mirror glass only in a 1999 Chevy Silverado. I had no instructions and could not find any until your video popped up on You Tube! Again thanks for posting this !
Thanks, saved me time. I bought my mirror on Ebay (used) for $125 and used your video to install it.
Man your the man doing it with one hand!!!! Thanks for the tutorial!
Thank you so much! Watched your video and then went and replaced the passenger mirror on my 08 Suburban. No problems.
Thanks man! I got a Hyundai sonata hybrid and I didn't know to remove the mirror until after I watched your video.
Thank you for doing this. I have to do this to my 2002 Chevy Silverado that has the drivers side mirror broken. I called a few repair places to hear them say that it couldn't be replaced without the whole housing. I found your video and can see they are full of crap, it is indeed out there and easy to do yourself so you are not taken advantage of by a repair shop. Thank you again.
Found one for $20 on eBay, probably won’t last but it’ll work for now.. I thought I had to change out the entire side mirror assembly until I found your video.. Thanks a bunch brother! Saved me $$$...
Thank you, my mirror for a 2003 Chevy Silverado Truck has turned a hazy yellow color, now I know I can just replace it!
Worked like a charm. 2 years later. Thanks.
Thanks so much for adding this video, Yours was the first one that I found because you took the time to make one on this subject. I have a 2004 Chevy Avalanche and broke the mirror part but not the housing so, this video on just replacing that part was awesome! I hope that you recover fully and I look forward to your next one, Thanks so much!
I really thank this Man for doing this video and I hope he doesn't mind my input to help. The car manufacturer did not care they were very ready to throw me as the customer under the bus after I spent $50thousand to buy the car and make all kinds of drama to just give the person the part number strong arming a sale a a ridiculous amount of money on this item. For even the sake of recycling that this world is in need of please give us the part numbers while good used parts that can help.
OH thank your for posting this. I just broke the mirror on my tahoe and the dealer told me $500 just for the part. Thank you so much for this!!
Sorry to hear that you had a stroke. Thank you for the awesome video because all I was getting told is i will have to buy the whole mirror Assembly and I would have to get repainted.
Thanks for this! I got a replacement glass for $14 on eBay for my Tahoe.
Hey bro, thanks for posting this. Keep on trucking bro, hope you are recovering as best you can.
thanks for taking the time to post this - it helped.
I just wanted to say thanks for the information u saved me hundreds of dollars. keep up the work of helping people, THANKS a Friend in Georgia USA.
Thanks Brian, great video presentation. I too saved hundreds by buying the glass for my 05 Avalanche on eBay for $14 and using your instructions to replace it. My glass cracked from behind when using power folding feature in sub-zero temps. There's no excuse for not knowing how to use a screwdriver. Saved $280. Thanks again and be well brother.
Thank for giving me the confidence to do it myself. Ordered mirror from Amazon and will install the first warm day.
Thanks - that was easy - got mine for $72.00 on Amazon (heated and turn) for my 2006 Chevy Avalanche - thumbs up
I never ever done this before, It took me 30 secs longer than the video showed me!!! Super!! Thx
Thanks, great video. Sorry to hear about your stroke.
Thank you I was trying to figure this mirror thing out .for a year I didn’t know you can only replace the glass mirror thanks.you did it with one one hand and holding the camera you are the man thanks for this great video 💪🏻👍
Thanks, Brian. Great video. Nice and easy instructions. The little tabs that came with my mirror for the heating element were a bit too wide so I ground them down a bit with my grinder. Whole job took 10 minutes. Thanks again.
I was wondering if I could just pop it off, thanks man, saved me a lot of time
A really useful video, thanks for posting. I'm in the UK, I have a German built Opel Vectra which, like your Chevy, is a GM car. The mirror fittings are very similar. No double sided sticky pads, just a series of clips arranged in a circle and two electrical connections. I'm replacing the glass on the drivers door mirror tomorrow, it was good to watch you doing this so I could see how the clipping-in works. No gasket came with my glass, which cost me only £9 including postage off eBay.
Brilliant! So clearly explained and shown...AND with one hand. Thanks..
Thanks for making this video, you help guys like me who are not mechanical at all.
Dan- Thanks for making this video. I saved a ton of money doing this myself, and your video made it really simple! -Rick
I'm amazed it popped off and on that easy. Got a new mirror on EBay for $13.80 heated but luckily I don't have the turn signal option.
Thanks very much, this was very helpful for my 2003 Escalade. Got a new glass and frame on eBay for $27, saved a bundle.
@mendo61
4 жыл бұрын
kthoennes I have an 03 Escalade as well and wondering if procedure is the same as the video. Any hints welcome. Thanks
Kudos man.....you deserve a lot of credit for your efforts. Stay well and good luck.
Thanks so much! It's always so nice to have this as a great resource....
Master DJ & Master mechanic , Wow, another very helpful video Brian ......Thank you
Thanks for the video. I saw a different one saying to peal off the back part of the housing, which could end up messing up the housing....so I like your way much better! Found aftermarket replacement for $18, so I will order the part and use your magic ! Thanks so much!
thanks,this video saved me some major bucks
I need one for a 2005 Z71 Chevy Suburban driver side, Great Content, subscribed for 3 years now, WILL practice and enjoy 😉
Adding sequential turn signals to my 2012 Chevy Equinox. Same procedure to get the glass off. Thanks for the video!
If your vehicle is a bit older or you're having trouble locating replacement glass, go to a local glass or mirror shop, and they will make a template and cut a new piece of glass from scratch. Did this for our 96 Suburban and the shop only charged $20, now the mirrors good as new.
You're awesome I was looking for specs to this this morning.. Yes, I am a mechanic but I read instruction before doing anything. Thank you
Thanks Brian. Pretty much how I thought it would go, but it's awesome to see the repair done first.
Thanks million! Like you, I had a stroke three years ago and replaced it with one hand. We're to damn young to have any strokes other than a bad game of golf!
Excellent. Video I put mines on by watxhing your video and one thing i will like to sharr is that i got my heated mirror with the signal sign on ebay for $25.00 it was on sale from the regular price of $34.99. Gos Bless and Thanks again.
Thanks for the info. It jogged my memory. You da bomb
This worked perfectly on my 2003 Tahoe. I bought a replacement glass on line` for less than $20.00.
a lot of the stuff on these vehicles is just pry off/pop on... it's always good to confirm which bits there are though. good to know!
Thanks. You got a good deal; the cheapest we found was $115.
Thanks very much. You have a wonderful attitude that inspires.
About to do the same on our 01 YUKON. Same mirror without the blinker. Thanks so much for the video. Great job!
just what I needed to see. thanks, buddy
Worked like a charm - thanks for posting
Great Video! I've been looking for some guidance to replace my side mirror glass and most of what I got shows you how to remove the entire housing or scrape the shards off and paste a glass without a backing plate. All I want to do is to remove the broken glass on its backing plate and pop in the replacement one. That's exactly what you did. Now that I know that prying it with a screw driver wont break it...I'm gonna go ahead with confidence. Thanks Brian!
Thanks for sharing this video, made my life very easy! 15 minutes and it was done
Very helpful and that was just the info I was looking for. Thanks much
Thanks my friend, this video is exactly what I was looking for.
Thanks buddy. Getting ready to do this. Much appreciate the informative post.
Thanks! I never would have figured it out! Going to order mine on line now...
Thank you! I have same mirror, no instructions anywhere. Now can do myself!
If you think about it this is still a dj video. A car is a tool you use for your equipment. Nothing like rolling to a gig with busted mirrors. No way keep professional. Thanks for sharing Brian.
Great tutorial! Couldn't find out how to replace this anywhere on the net. Thanks
thanks for the tutorial Brian, added some LED blinkers to my '01 sierra, tricky part was to remove the glass without breaking :) used a long flat head and popped about 6-7 tabs and then it just came right out.
awesomeness that is a lot easier than I thought! thank you!
Nice. Just the information I needed to replace mine. Thank you so much!
Thanks for posting this, helped me save a bundle
thanks for sharing! have been looking for instructions on how to replace a broken side mirror!
Ty for the video, just what I was looking for.
Brother, this is soooo helpful. Thanks,
Thank you for the video. I just came home from the store where they stole my side mirror glass from my suburban. Glad to see it can be replaced fairly easy. Thanks again for the video tutorial.
@lennystiles7675
2 жыл бұрын
Same thing happened to me. One thing I forgot to do is etch "F@&k you" in the back of the new mirror in case it happens again.
'Thanks, you just saved me a lot of time and frustration. I just backed my 05 Yukon's mirror into a concrete decorative awning and cracked the damn fancy mirror with signal and heat and xray vision built in. I bought the replacement part on ebay for $168 Kool Vue CV49GL-S. I appreciate the effort and quality video!!! Thanks again. WT
Looks easy. Here I go to give it a try. Thanks, man.
Really good tutorial! You helped me out tremendously.
Excellent video. I got an Avanlanche and it's on the passenger side but this is exactly what I needed.
Helpful tutorial. I have a 2003 Silverado 2500HD. The mirror glass is heated, auto-dim with turn signal (3 electrical connections). I found a replacement glass at Discount Body Parts. Saved $250+ over GM OE. Fast shipping, high quality Kool Vue OE replacement. Went on in a snap (Pun intended). Thanks for posting this video.
@robertlopez1734
9 жыл бұрын
Where did you find your replacement glass at? thanks
@Nitronerd
9 жыл бұрын
Robert Lopez As my reply states, Discount Body Parts. Part #: CV49GL-S.
@robertlopez1734
9 жыл бұрын
Thank you!
Thanks so much for the video. I found right mirror glass and plan on installing myself...
Thank you brother.....good piece right here. Really appreciate it
I had a left side stroke, so I will try with my right hand, great information
@bruceblair419
7 жыл бұрын
Took 20minutes with help from my son. Pretty easy, took two hands from my son to disconnect the plug. Easy brezzy
thanks for the post…i have to change mine today and had no clue what to do.
Thank you! I'm ordering my mirror today and getting her done :)
thanks man you did a great job i have fix mine thanks to you video
Thank you for adding this video!
Damn. I was stressing about this. My 2500 HD got water behind the film somehow. Don't wanna go into winter that way. Pretty sure you saved me. Thanks brother! Pretty sure I can handle it now! God bless.
Great job, Thanks for posting this !!
thank you I just broke the side view mirror this morning...totally shattered backing out of my garage...part ordered...I'll install it myself or my boyfriend will...thx!!!
This is a big help.
Job done! As briansredd says, it is so easy. It took me a few minutes. With some GM cars, such as my Vectra, there is a little metal clip which you need to prise out of the old mirror and pop it into the new one.
You da Man Behind The Man. 💪
Thanks for the great video. Had a hard time figuring this out.
Thank you! I just fixed my own escalade mirror for 20 bucks
Thanks so much! I have to do this on my '02 Yukon.
Great Job!!! Very cost effective!
Yooo thank you so much bro!! Saved me 280!!
You’re a rockstar! Thank you!!
Thanks for the video i was about to buy the whole mirror because the mirror has a haze which makes it useless. Thanks my friend God Bless You
Thank you that was exactly what I needed
Thanks for this video. Now I can do it myself.
Thanks for the video man, sorry to hear about the stroke.