If this video helped you please subscribe and help support our channel. Thank you

@jetnoise007

6 жыл бұрын

Flashback502 will this also work on a Dodge Ram side mirror my Hub is sprung and I was wondering if it would be basically the same way appreciate a response have a great day thanks for the video

Your step by step, pause frames and everywere on point! The small details are where its at. Thanks man!

@Flashback502

Жыл бұрын

Glad it helped!

hey bro, great video. in the process i discovered a shortcut for the tough part. take a 30mm socket, place it over the steel ring, wack it really good with a rubber mallet and it seats right into place.

@Flashback502

4 жыл бұрын

Thanks for tip, Yea getting spring down was the hardest part. Please subscribe & like and share if haven't already and check out our other helpful videos

Great video. I would just like to add that if you drill a couple holes into that cast aluminum piece, you could put a roll pin or a long nail through it to keep that lock washer from ever sliding off again.

@Flashback502

2 жыл бұрын

Thanks for helpful tips. Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

Flashback502 - Thank you for showing the process for this. My passenger side mirror did this. I have an idea for getting that clip back on. Use a OS/2 socket so you can go right over it and then put an extension on it and force it down. I have to check out the size of the socket compared to the clip size. Hopefully they are similar enough :)

@Flashback502

8 ай бұрын

Your welcome thanks for helpful tip

Hey man awesome video. I was able to help my dad fix the drivers side mirror on our Yukon. It was wobbly, and I followed the instructions in your video to successfully fix fix the mirror. We thought we had to buy a new one.

@Flashback502

6 жыл бұрын

Luis Arroyo thanks for watching glad was able to help with mirror. Please Subscribe and share if haven't already and check out my other helpful videos. Thanks for your support.

Thank you for the detailed instructions. I had this very thing happen with my passenger side mirror. My brother in law and I took it off and decided there wasn't any way to get in there and look at it let alone fix it. We were simply going to go to take time and spend some money at the junkyard for a replacement. At the last minute I decided to type "fix a tahoe side mirror" into KZread, since KZread has been a great resource in the past. Lo and behold, there was your video. We followed your instructions and the mirror is fixed / back on the truck. It definitely is no picnic pressing that cap on while having to compress the spring. But we did it with a pair of channel locks and a pair of pliers and a hammer. You saved me money and time. Thanks again!

@Flashback502

6 жыл бұрын

mbtjr Thanks for watching and for comment glad you was able to get mirror fixed please subscribe if haven't already share and check out my other helpful videos.

@jenseefeldt9799

2 жыл бұрын

That was a great video. I was able to use a C shaped valve spring compressor to put that ring back on. Once you have it back together, drill a couple holes in the cast aluminum piece and put a roll pin, nail, or wire through both sides and it can never slide apart again.

I used this video to fix my wife's mirror, works great now....thank you

@Flashback502

5 жыл бұрын

Thanks for watching and commenting glad was able to mirror. Please Subscribe and share if haven't already and check out my other helpful videos.

I had exactly the same issue w/ my 2001 Tahoe. With the help of the video I was able to fix it without breaking anything and it works fine. Thanks for the useful guidance.

@Flashback502

2 жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

Thanks for the lesson, I was thinking we need a new mirror but I bet you just taught us how to fix it. Much appreciated!

@Flashback502

6 жыл бұрын

DrScientistSounds thanks for watching glad was able to help with mirror please subscribe and share if haven't already and check out my other helpful videos.

thanks so much, i used c-clamps to compress the spring. saved me money.

@Flashback502

4 жыл бұрын

Good ideal to use C-clamp👍 Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Thanks brother..just bought a beautiful white 03 yukon and the driver side mirror was.loose and the dealership just put a peice of cardboard under it to hold it in and I found your video and i finally fixed it!!! Saved me $110 bucks .from buying a whole new side mirror

@Flashback502

4 жыл бұрын

Great trucks👍Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Maaaaaan thank you so much. 👏👏💪You just saved me 150€. Greetings from Austria

@Flashback502

2 жыл бұрын

Your welcome glad could help thanks for commenting. please subscribe like and share and check our my other helpfull videos.

Thanks so much for your video, I live in New Zealand where all Chevy trucks are imported and we are not able to just go and buy used parts at a wrecking yard for most models as they are hard to find here. New parts are available online but shipping costs are very high even if we can find some parts supplier who will even ship to NZ. So your video was a godsend when my mirror failed. Instructions were clear and like most people I was only a bit stuck when pressing the washer back on. I tried a valve spring compressor which was probably a little small to handle the job, I tried zip tying the spring after compressing it with a couple of vice grips but the ties I had werent beefy enough to hold it when I released the vice grips. In the end I used a couple of small G Clamps which worked out with the help of a friend. I was going to put a pin in as someone else suggested to help hold the washer down but opted for using a hot glue gun to liberally glue around the top which seems to be working great.....thanks :-)

@Flashback502

2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Awesome video! Thought I needed a whole new mirror. Saved me $50! Thanks a bunch!

@Flashback502

2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

The only video that helped me out thank you brother you a real one

@Flashback502

11 ай бұрын

You're welcome glad could help

Just yesterday my drivers mirror started to wobble somewhat. It certainly was very irritating and this video shows me exactly what I need to do to fix it. Thanks!

@Flashback502

6 жыл бұрын

Steve Hersh thanks for watching and commenting glad video was able to help show you how to fix it. Please Subscribe and share if haven't already and check out my other helpful videos.

Just what I was looking for. Saved me a trip to the junkyard. Thanks

@Flashback502

3 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Tried fixing my 2002 denali and the assembly was totally diffrent and wasnt able to fix. Now my 2003 silverado was similar to the one on this video and ibwas able to fix it. Out of nowhere this mirror was like this. I always fold the mirror by hand and park my truck in the garage. I went to fold it back open and it was loose. Thanks to this video i was able to fix it. 1 tip, The spring was so hard to push down what i did was hit it down with a flat head screw driver between the teeth on the ring. But make sure the teeth are back down because mine was up.

@Flashback502

2 ай бұрын

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

Man thats the best video on mirror repair on youtube.i have an 03 silverado & its doing the same thing.youre video is strait to the point & very clear.i can swap engines & trannys & rear ends but this one stumped me lol.i think i can handle it now.i subscribed.first video ive ever subscribed to.thanks man.

@Flashback502

5 жыл бұрын

Your welcome, Lol I no how That is sometimes it's the little things that cause the most problems. Thanks for watching & commenting and sub, glad could help.

Thank you very much for this very detailed video. This just happened to me last week, saved me money and time.

@Flashback502

3 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Thanks for the video! The spring and cap on my Silverado are pretty rusty so it was tricky to get them down. Ended up using vice clamps to help drive it down while pushing with the flat part of a hex screwdriver. Whew! Glad to have my mirror secured. =)

@Flashback502

2 жыл бұрын

Yes can be hard to get down sometimes.Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

Really good video and helped me fix my broken mirror. Thanks!!

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

thanks a lot your video saved me having to buy a new one!!

@Flashback502

6 жыл бұрын

Manchester Roofing Systems thanks for watching glad was able to help. Please Subscribe and share if haven't already and check out my other helpful videos.

Very helpful video. My Silverado mirror rattles so I’ll follow your instructions to disassemble but may need to fix something else inside. Thanks.

@Flashback502

5 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help hope you get it fixed. Please subscribe & like and share if haven't already and check out our other helpful videos

Good video and Thanks... that's just what happened with my truck and now it's fixed!

@Flashback502

5 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Subscribed after watching, this helped alot thank you!

@Flashback502

5 жыл бұрын

Thanks for sub and watching

Thank you! Thank you! Thank you! This was an easy fix thanks to you. I can't say thank you enough.

@Flashback502

Жыл бұрын

You're welcome glad could help

Thanks that was exactly what I needed

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

EXACTLY the solution and information that I needed! THANK YOU!

@Flashback502

2 жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@dziggy3004

2 жыл бұрын

I tried to press the locking washer via two clamps, and also jacking the washer downward using a small screwdriver... however, I finally removed the mirror assembly from the car and temporarily pulled the wire from the locking nut to give access to a VISE to first press the locknut flat and mostly to press it onto the tube using an oversized socket (note: used three sizes above the socket that fit the tube in order to allow the locknut to sufficiently flex when pressing it on.) I probably didn't need to do this, but I tack-welded two sides of the nut to make sure it wouldn't slip.

Excellent step by step guide, thanks

@Flashback502

6 жыл бұрын

Bruce Harnden thanks for watching and commenting. Please Subscribe and share if haven't already and check out my other helpful videos.

Awesome video Back together in a flash.

@Flashback502

4 ай бұрын

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

this is exactly what i needed to see! thanks!

@Flashback502

2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Had to repair the passenger side mirror on the wife's Denali. Found out if you tear it down further and remove to wires from the neck it is much easier, all you have to do is use a slightly larger socket that the neck and push everything back together with a bench vise.

@Flashback502

6 жыл бұрын

Justin Hoyle Thanks for watching glad was able to help, also thanks for sharing some helpful tips on how to fix, please subscribe and share video, and check out my other helpful videos.

Thanks bro! you just saved me some money.

@Flashback502

5 жыл бұрын

Your welcome glad could help. Please subscribe and share if haven't already and check out our other helpful videos.

Hell yeah I think you just showed me how to fix my issues thanks brotha

@Flashback502

2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Most helpful! Thank you very much for posting this video.

@Flashback502

3 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

@thomasparkin4183

3 жыл бұрын

@@Flashback502 the same problem. That clip ring was off the tube. Was fearing the idea of buying a new mirror assembly. Bought this Tahoe for a song. It was neglected for a couple years. Been replacing worn parts and bring it up to A-1 condition. Is a 2001, now My wife is driving a near new, 20 year old, beautiful vehicle. Only gave 3500 for it, 145k miles. Is now in excellent shape. Thanks again.

Thanks! Worked great.

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Had to use a 1/2 inch extension holding one side down while I used a hammer to hit the other side voila, it works great.

@Flashback502

5 жыл бұрын

Thanks for watching and commenting glad was able to help with mirror. Please Subscribe and share if haven't already and check out my other helpful videos.

Great help thanks

thanks for share this tip. I try to fix my mirror.

@Flashback502

5 жыл бұрын

Thanks for watching and commenting hope you get it fixed. Please Subscribe and share if haven't already and check out my other helpful videos.

Very helpful you saved me money.

@Flashback502

5 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

thank you for uploading!! appreciated!

@Flashback502

Жыл бұрын

Your welcome glad could help please subscribe like and share and check out our other helpfull videos.

Excellent explanation; thanks so much!

@Flashback502

2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

Very helpful video, thanks!

@Flashback502

3 ай бұрын

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

Definitely going to try this on my Tahoe later.. not trying to spend 200$ for a new set

@Flashback502

4 жыл бұрын

Hope it works for you. Please subscribe & like and share if haven't already and check out our other helpful videos

Thank you sir, I'm about to go fox my mirror.

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Good video man!

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Great Video Bro...

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Thank u. It deff help bro!

@Flashback502

3 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

What is that plastic around the motor called with the two looking batteries

Great video.

@Flashback502

3 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Gracias por el video creía que tenía que remplasar todo el espejo👍

@Flashback502

5 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Hey. Great video. Mine is starting to wobble and hopping to not have to buy a new one. I have power folding mirror. Does this fix apply to these as well? Thanks again.

@Flashback502

3 жыл бұрын

Yes should work. Please subscribe & like and share if haven't already and check out our other helpful videos

Best how to get there and fix it on these yet! THANKS

@Flashback502

4 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

thanks ,this helped

@Flashback502

5 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

This shit just happened to me 5 minutes ago. Great video. Thanks for sharing.

@Flashback502

3 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

L1C4 baby! yeah

@Flashback502

3 жыл бұрын

All day 👍Please subscribe & like and share if haven't already and check out our other helpful videos

I tried this and I couldnt pop the tabs off behind the glass and ended up shattering the glass. Yay.

I got as far as taking the hub/housing apart with no problem, but the clip was a problem I bent the tabs as you instructed but I could not get the ring to go over the spring. At the end of your video I did not see how you press that cap/ring over the springs, show me how you did that...

@mbtjr

6 жыл бұрын

It was no picnic. We were fortunate enough to have a couple of pairs of channel locks. We used one pair of channel logs to compress one side of the spring, and a pair of pliers and a hammer to compress the other side at the same time. Took us about ten minutes to figure it out, but it works.

Thanks...

@Flashback502

3 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

Gracias por el video

@Flashback502

4 жыл бұрын

Your welcome glad could help.

I know this video is 3 years old but I wanted to know if you have to remove the mirror in order to make the repair

@Flashback502

9 ай бұрын

Most cases Yes

Very helpful but how the heck did you end up compressing that spring to get the collar back on? I'm stumped.

@Flashback502

5 жыл бұрын

Thanks for watching lol yea took patience and vice gripps and needle nose, took about 10m to get it done. Please subscribe and share and check out our other helpful videos.

does this work for a 2014 gmc power mirror?

@Flashback502

4 жыл бұрын

Should be the sane process if neck of mirror is broken.Please subscribe & like and share if haven't already and check out our other helpful videos

My fix was 2 strips of tie wire. Tow mirrors eventually

@Flashback502

5 жыл бұрын

Thanks for watching and commenting glad you got it fixed. Please Subscribe and share if haven't already and check out my other helpful videos.

Dam dude you are about to save me some cash

@Flashback502

5 жыл бұрын

Thanks for watching and commenting glad was able to help. Please Subscribe and share if haven't already and check out my other helpful videos.

my screw in the hole is a dud like it wont screw out.:/

@Flashback502

3 жыл бұрын

Hope u got it fixed, Please subscribe & like and share if haven't already and check out our other helpful videos

I dont know why in the world you would make this video and title it fix brocken side mirror neck chevy ect.... if youre going to skip the most important part of this tutorial,how to actually press down on that spring and cap its almost impossible?

@Flashback502

5 жыл бұрын

Thanks for watching I used needle nose and vice gripps it took about 15min to get it down that's why didn't show it, was told video would be to long.

@BiggCleve2

5 жыл бұрын

I used 2 large wood clamps and a large flathead screwdriver

@Flashback502

5 жыл бұрын

Thanks for info on how you got it down. Please subscribe & like and share if haven't already and check out our other helpful videos

I'd like to meet the clown ("engineer") that designed this cheap junk...ridiculous...

@Flashback502

4 жыл бұрын

Lol Please subscribe & like and share if haven't already and check out our other helpful videos

🙏 god bless you sir … thank you for you lessons appreciate