Music : Ikson - Harmony Link : • #57 Harmony (Official) Music by / ikson
Жүктеу.....
Пікірлер: 60
@DavidGarcia-rz9mn9 ай бұрын
Thanks for your time to show us.
@cherokeelittle45824 жыл бұрын
Anti seize on the new sensors threads, makes life a whole lot easier the next go around
@omegaqed8592
2 жыл бұрын
New sensors should be coming with anti-seize already applied -- if you're buying the sensor from Cummins.
@manuelsalgado85105 жыл бұрын
What size socket did you use? And what year and model truck? Thanks for the video
@camshaftP166 жыл бұрын
Also the is a core charge on the old sensor so don't cut the wires in an effort to remove it.good vid.
@youngrevival9715
Жыл бұрын
Sometimes the cost of the core isn’t worth the labor . On. A Detroit it’s very hard to get to and take a along time even with the right socket to save the core I just cut it and is e a socket saves time
@chris76-013 жыл бұрын
Mine is spn 3216, low input voltage. Does that mean it's bad or just a loose connection somewhere? Truck still runs like normal.
@rodgerjrleppin54094 жыл бұрын
If your positive that the sensor is bad, I cut the pig tale off and put a deep socket right onto the old sensor, makes life a lot easier
@omegaqed8592
2 жыл бұрын
Cummins analyzes core returns to help improve the product. If you cut off the probe, that analysis is lost.
@eazymacavelli8375
2 жыл бұрын
$250 core charge
@brnmcc01
Жыл бұрын
@@omegaqed8592 Not really, it's just the wires, cut it at least 12" away from the sensor, then there's enough wire to splice the connections later if need be.
@omegaqed8592
Жыл бұрын
@@brnmcc01 cutting the wires in the shop leaves the sensor vulnerable to moisture and VOCs entering the sensor controller or probe (via open wire ends), making analysis and remanufacture less reliable.
@FirstLast-ig2mg5 жыл бұрын
Is the 8mm a semi deep?
@fivestar0002 жыл бұрын
Can I drive the truck if I get the Nox sensor intake code? Or I need to get it in the shop asap
@williseabon8943 күн бұрын
Will heating it make it easier to loosen?
@mpwg3134 жыл бұрын
What's the part number for the sensor
@mustrani1502 жыл бұрын
Why you changing it ? How do we know we have a bad sensor ?
@boomanati8772 Жыл бұрын
I changed nox sensor now I'm getting a 1569 fmi 31 code any help?
@robeltesema42655 жыл бұрын
Thanks for putting up this video. How much did you buy it.
@rudyflores8746
4 жыл бұрын
If you go to the dealership they are around 6-700.00 Amazon 225.00
@loonyhap80434 жыл бұрын
how much it cost for the inlet nox sensor&outlet sensor??i heard they cost over $600+??
@BulletMcNugget
4 жыл бұрын
Yep. Around there, each.
@preetsingh6945 жыл бұрын
Is it cm2250 or cm2350 ? And did you say they go out after 20k miles?
@leerhill
5 жыл бұрын
Preet Singh thought he said 400K
@Carl0sjim3n3z5 жыл бұрын
I'm trying to buy one of those sockets, what size is it if you don't mind?
@BulletMcNugget
5 жыл бұрын
Carlos Jimenez its a snap on part number, swr2.
@omegaqed8592
5 жыл бұрын
22mm hex
@mwhitelaw85694 жыл бұрын
That's funny man My inflow is still an oe part But I replaced my outflow when I did an scr replacement. And I'm @687914 on the clock
@kanwerbhullar3729
4 жыл бұрын
How much cost scr
@omegaqed8592
2 жыл бұрын
If your inlet NOx sensor is still original at that mileage, I'm 100% certain it is no longer functional. 😆
@mwhitelaw8569
2 жыл бұрын
@@omegaqed8592 It never tossed a code Like aftertreatment intake or anything It passed 1 million miles. So I recycled the whole truck Donation to a truck school
@tommysena5945 жыл бұрын
What is the caused to drop the oil to 25psi while driving?
@BulletMcNugget
5 жыл бұрын
Number of things. Just engine having high mileage, old oil, change oil filter would be first place to start.
@Strokeit242 ай бұрын
PUT ELEVATOR MUSIC IN YOUR NEXT VIDEO. THNAKS!
@massumudin5 жыл бұрын
Where is the outlet nox sensor?
@DanWebster2 жыл бұрын
on a 2020 pete how often does this thang need replacement on average and thanks for posting the video -pawpaw
@omegaqed8592
2 жыл бұрын
2020 X15 is an excellent vintage for NOx sensors. You should be good to at least 7k engine hours.
@brnmcc01
Жыл бұрын
@@omegaqed8592 Last engine that I replaced both NOx sensors had a little over 8000 hrs on it.
@leerhill5 жыл бұрын
Where’s your shop located?
@BulletMcNugget
5 жыл бұрын
Lee Hill sacramento, CA
@truckerforever Жыл бұрын
Next time heat it up for a minute with the torch, it comes out right away.
@agavebob34625 жыл бұрын
What are the symptoms of a bad NoX sensor? I have a code says "aftertreatment intake NoX sensor power supply- data erratic, intermittent or incorrect".
@BulletMcNugget
5 жыл бұрын
Agave Bob id check voltage going to nox sensor, if its good then replace sensor cause its problly just shorting out
@randyblack2317
2 жыл бұрын
@@BulletMcNugget do you have to put a scan tool on it to remove check engine light? or will it go off after replacement?
@MrDirtybird777
2 жыл бұрын
@@randyblack2317 scan tool regen.. right?
@breadn5556
Жыл бұрын
You'll get the check engine light. The engine info will say "see operators manual"
@raulyni7014 жыл бұрын
How much this sensor bro ?
@BulletMcNugget
4 жыл бұрын
like $130 bucks
@YolkSandwich11 ай бұрын
part number?
@Uncleshawny5 жыл бұрын
And this is the outlet box sensor on the Cummins isx correct
@BulletMcNugget
5 жыл бұрын
this is inlet.
@Social_Brat2 жыл бұрын
After installing it, the def light came on.
@joncheck21585 жыл бұрын
Just cut the wires and use a deep well socket. The sensor is bad.
@brnmcc01
Жыл бұрын
I've found a closed end wrench is even better than a socket.
@PoliticalGangster3 жыл бұрын
Rather listen to the work in action over that crappy noise/whatever. I came here to watch a man replace the nox sensor not some music video.
@aggabus2 жыл бұрын
Devilish noise
@heavydutyrepair642 жыл бұрын
A pain in the BUTT
@heavydutyrepair642 жыл бұрын
A bunch of stupid nonsense ,I put one on an ISB 6.7 ,a total PAIN in the BUTT
Пікірлер: 60
Thanks for your time to show us.
Anti seize on the new sensors threads, makes life a whole lot easier the next go around
@omegaqed8592
2 жыл бұрын
New sensors should be coming with anti-seize already applied -- if you're buying the sensor from Cummins.
What size socket did you use? And what year and model truck? Thanks for the video
Also the is a core charge on the old sensor so don't cut the wires in an effort to remove it.good vid.
@youngrevival9715
Жыл бұрын
Sometimes the cost of the core isn’t worth the labor . On. A Detroit it’s very hard to get to and take a along time even with the right socket to save the core I just cut it and is e a socket saves time
Mine is spn 3216, low input voltage. Does that mean it's bad or just a loose connection somewhere? Truck still runs like normal.
If your positive that the sensor is bad, I cut the pig tale off and put a deep socket right onto the old sensor, makes life a lot easier
@omegaqed8592
2 жыл бұрын
Cummins analyzes core returns to help improve the product. If you cut off the probe, that analysis is lost.
@eazymacavelli8375
2 жыл бұрын
$250 core charge
@brnmcc01
Жыл бұрын
@@omegaqed8592 Not really, it's just the wires, cut it at least 12" away from the sensor, then there's enough wire to splice the connections later if need be.
@omegaqed8592
Жыл бұрын
@@brnmcc01 cutting the wires in the shop leaves the sensor vulnerable to moisture and VOCs entering the sensor controller or probe (via open wire ends), making analysis and remanufacture less reliable.
Is the 8mm a semi deep?
Can I drive the truck if I get the Nox sensor intake code? Or I need to get it in the shop asap
Will heating it make it easier to loosen?
What's the part number for the sensor
Why you changing it ? How do we know we have a bad sensor ?
I changed nox sensor now I'm getting a 1569 fmi 31 code any help?
Thanks for putting up this video. How much did you buy it.
@rudyflores8746
4 жыл бұрын
If you go to the dealership they are around 6-700.00 Amazon 225.00
how much it cost for the inlet nox sensor&outlet sensor??i heard they cost over $600+??
@BulletMcNugget
4 жыл бұрын
Yep. Around there, each.
Is it cm2250 or cm2350 ? And did you say they go out after 20k miles?
@leerhill
5 жыл бұрын
Preet Singh thought he said 400K
I'm trying to buy one of those sockets, what size is it if you don't mind?
@BulletMcNugget
5 жыл бұрын
Carlos Jimenez its a snap on part number, swr2.
@omegaqed8592
5 жыл бұрын
22mm hex
That's funny man My inflow is still an oe part But I replaced my outflow when I did an scr replacement. And I'm @687914 on the clock
@kanwerbhullar3729
4 жыл бұрын
How much cost scr
@omegaqed8592
2 жыл бұрын
If your inlet NOx sensor is still original at that mileage, I'm 100% certain it is no longer functional. 😆
@mwhitelaw8569
2 жыл бұрын
@@omegaqed8592 It never tossed a code Like aftertreatment intake or anything It passed 1 million miles. So I recycled the whole truck Donation to a truck school
What is the caused to drop the oil to 25psi while driving?
@BulletMcNugget
5 жыл бұрын
Number of things. Just engine having high mileage, old oil, change oil filter would be first place to start.
PUT ELEVATOR MUSIC IN YOUR NEXT VIDEO. THNAKS!
Where is the outlet nox sensor?
on a 2020 pete how often does this thang need replacement on average and thanks for posting the video -pawpaw
@omegaqed8592
2 жыл бұрын
2020 X15 is an excellent vintage for NOx sensors. You should be good to at least 7k engine hours.
@brnmcc01
Жыл бұрын
@@omegaqed8592 Last engine that I replaced both NOx sensors had a little over 8000 hrs on it.
Where’s your shop located?
@BulletMcNugget
5 жыл бұрын
Lee Hill sacramento, CA
Next time heat it up for a minute with the torch, it comes out right away.
What are the symptoms of a bad NoX sensor? I have a code says "aftertreatment intake NoX sensor power supply- data erratic, intermittent or incorrect".
@BulletMcNugget
5 жыл бұрын
Agave Bob id check voltage going to nox sensor, if its good then replace sensor cause its problly just shorting out
@randyblack2317
2 жыл бұрын
@@BulletMcNugget do you have to put a scan tool on it to remove check engine light? or will it go off after replacement?
@MrDirtybird777
2 жыл бұрын
@@randyblack2317 scan tool regen.. right?
@breadn5556
Жыл бұрын
You'll get the check engine light. The engine info will say "see operators manual"
How much this sensor bro ?
@BulletMcNugget
4 жыл бұрын
like $130 bucks
part number?
And this is the outlet box sensor on the Cummins isx correct
@BulletMcNugget
5 жыл бұрын
this is inlet.
After installing it, the def light came on.
Just cut the wires and use a deep well socket. The sensor is bad.
@brnmcc01
Жыл бұрын
I've found a closed end wrench is even better than a socket.
Rather listen to the work in action over that crappy noise/whatever. I came here to watch a man replace the nox sensor not some music video.
Devilish noise
A pain in the BUTT
A bunch of stupid nonsense ,I put one on an ISB 6.7 ,a total PAIN in the BUTT
Will heating it make it easier to loosen?