Great videos I just bought my first Cummins a 2019 X15

Plethora of information. Subbed and thank you!!

Everything trouble shooting Cummins like codes, your approach to trouble shooting, if you have any after treatment system trouble shooting too- thank you 🙏

Back pressure sensor located in the intake side of the engine. That’s Cummins Logic 🤪

Trying to get my boss to pony up so I can be at the next level. We are a family business so money Is a issue sometimes

after you change sensor do you have to reset ECM computer?

how much is this software to download to your laptop for example?

Awesome!!

very good

Thx Master-teacher

@Detroittruckdoctor55

4 жыл бұрын

Is his class worth it

Great video keep posting pls Pls (3&2 wire sensor) electrical repairs computer

Can you have a bad sensor and have fault code?

is that going to show your tempture gauge to work

Did you find air leak.? My truck is doing the same thing.

I got a code on my freightliner DD15; SPN 3510 FMI 3. Is anyone deal with that code before?

Where are you located having same issue but just showing Spn-723

I’m looking into getting a computer to scan my trucks . What computers or software do you use ? Can you point me out to the right direction

Will that reduce power?

Great video need tuning the computer when put in new sensor ?

@BulletMcNugget

4 жыл бұрын

no need.

My freightliner m2 i do hear a constant sound underneath the driver side, it's loud. I know it's coming from turbo. I replaced turbo actuator but still have same issue. What could be wrong any suggestions would be highly appreciated? Thanks.

@oscardom417

3 жыл бұрын

Ok

@codycampbell4743

2 жыл бұрын

Hey I have the same issue , have you found the fix for this

I have a 2013 T660 with an ISX. Ran scan with my snap-on pro link. Coming up with AFT SCR CATALYST CONVERSION EFFICIENCY code...OEM code 3582- FMI 31. Any ideas on troubleshooting this issue? Thanks

@davidhernandez7161

3 ай бұрын

Run an SCR Regen, not just a dpf regen. You Need Cummins insite for this. Conversion efficiency codes usually mean they need a clean out or they’re done for.

What kind of problems was truck having when this sensor was bad?

@mikehernandez1809

Жыл бұрын

Derate and could not force regen

Can this sensor turn off your truck?

Do ever heard that’s engine oil goes to diseal tanks

Were can I download that program I got 2016 Freightliner with cummings engine

@davidhernandez7161

3 ай бұрын

You have to buy it from cummins

Where are you located?

I have a code SPN 1209 Exhaust pressure sensor and my truck is overheating like crazy for no reason. Is the sensor doing all the overheating ?

@BulletMcNugget

4 жыл бұрын

Very unlikely.

@jacobadam9872

4 жыл бұрын

@@BulletMcNugget Oh no im far from home this is so bad. Very bad on money to

@dieselhogs3558

2 жыл бұрын

@@jacobadam9872 did you have it looked at?? Did it have to do with the egr system??

@rakimmason8

Жыл бұрын

What ended up being the issue ?

I am getting these same codes intermittently . And alot of white smoke at highway speeds only when heavily accelerating or climbing hills with a heavy load . Could this problem be sensor related ? Or something deeper like a bad DPF or fuel injector ?

@davidhernandez7161

3 ай бұрын

EGR cooler leaking if you’re coolant is low.

@rakimmason8

3 ай бұрын

@@davidhernandez7161 wasn’t losing coolant . Got tired of throwing money at it so I gave in 🤷🏾‍♂️ cut it out a year ago and haven’t had a problem since ✂️ best decision I’ve ever made 🙌🏾

It’s my fault… I must’ve cracked the sensor when I was removing the EGR crossover tube LOL ha ha ha ha. Really though, that’s probably what happened, I’ve seen it 1 million times. Got to be careful with that lower passenger side EGR crossover tube bolt, or remove the OEM harness connector from sensor before attempting.

@tomcowart

Жыл бұрын

Lmao, I just did this today. New sensor at Peterbilt was $197, doh.

@hdgsj584

Жыл бұрын

Hi friend Cummins cm2250 QSX15 580 I Need to delete DPF DEF EGR EGT

4723 code?

have you ever have any issues flashing through the data port in the cab ? I have heard that it can drop out and blank the ecm sometimes.

@BulletMcNugget

4 жыл бұрын

never any issues.

@trainer2018

4 жыл бұрын

@@BulletMcNugget Glad you have not had issues. Unfortunately I have. I did a cal once at the 1939 Data link port and the ecm received the cal fine but the parameters were all wrong setting multiple codes. I always cal the ecm at the Data plug on the engine harness. I recommend you do the same. The parameters did not take I think because of all the traffic on the 1939 network. I fixed the issue by having a known good template of the vehicle and reinstalling it. So you ready to buy a Picoscope from me and take your diagnostics to the next level?😉

@BulletMcNugget

4 жыл бұрын

busjockey1 i always do a work order and save parameters, cause it wipes out the ecm completely when it changes calibration.

@fixitjerry

4 жыл бұрын

I've had this issue with the inline 6, I bought a rs232 cable its slower but it never loses the connection. And that laptop you have is it from diesellaptop?

@Uc9uE3pKsS6uQ

Жыл бұрын

@@fixitjerry RS232 is cable connector / 1939 is communication protocol

To me, that turbo is whistling or there is some leak on that right side of engine.

@BulletMcNugget

3 жыл бұрын

Yes, i heard it too and at one point you can see in the video i try feeling for air with my hand but if i remember correctly i found the flex pipe after turbo broken...

Spn 157 engine fuel injector 1 meter rail pressure 1 do you know what can be the problem

@davidhernandez7161

3 ай бұрын

Injector 1 loosing pressure

Tôi muốn mua máy test..

What software are you using on your computer?

@David-ho7nt

8 ай бұрын

The program is Cummins insite

When I turn on my truck...it won't accelerate and pressing down the gas paddle

Would the truck run if you unplug that sensor

@davidhernandez7161

3 ай бұрын

It will run

@breadn5556

2 ай бұрын

Can i just unplug it indefinitely?​@@davidhernandez7161

Were can you get ( BUY) the computer software too fix little stuff like this im sure this lab top is around 5000 to 10000 i have an X15 like your vids keep them coming

@playwin2175

2 жыл бұрын

I can hook you up with the software

@willd2697

Жыл бұрын

@@playwin2175 Hey, could you hook me up with the software. I’ve got a 2015 pete with an isx15. The software would definitely be handy

@charliepurple5472

Жыл бұрын

@@playwin2175I definitely need it as well, please and thank you!

FAW 8.140 no power bling codes 4-1-5

You need to do an EGR EGR tuneup.

3216 fmi 10 nox sensor will derate my engine?

@davidhernandez7161

3 ай бұрын

Yes!

How much is the computer to test if something is wrong with the truck

@dieselhogs3558

2 жыл бұрын

Used about 1k to 3k with everything you need. New about 4K to 15k depending how crazy you want to get with the programs.

@alexanderthegreat8067

2 жыл бұрын

You have them from $600 and up but usually $600 to $900 on dhgate. You won’t be able to update the software with that product but who cares you can keep using it.

Nice hacked sofware.

Dum