Thumbs up brother. I was on the side of the road with a red stop engine code. My brother and I both saw this previously and pulled it up. Disconnected the magic plug and was able to drive from Iowa to MD. After a couple hundred miles, the , the red stop engine went away and the bell stopped dinging. Only had check engine light. Man you saved my ass as well as a couple grand in shop and tow bills. If I ever run into you....drinks on me.

Hey brother I’m pretty knowledgeable when itcomes to these cummins as well and like you I’ve known about this flood and used it on my previous Kenworth on the 871 now I have a Pete with the 2350 and have been experiencing DPF that has taken a turn for the worse so as we speak I’m running with the magic plugged unplugged just to get home so a buddy of mine can work some computer magic so I can vouch for all the other watchers that I boy hair is correct but on my particular truckIt has given me a countdown of time before 25% the right so we bout to pull over plug up regen and see where we go

Thanks man I broke down on my truck and unplugged it after watching your video it worked great

@MakeCentsTrucking

5 жыл бұрын

AWESOME!!

@Jerzeyguy

5 жыл бұрын

MakeCents how u doing. Tried it it today , was having a code for the nox sensor behind the turbo and it didn’t work. You got a second magic plug?

THIS VIDEO got me home one night. Saved 2 grand in tow bills

@MakeCentsTrucking

4 жыл бұрын

:):):) Awesome!!!

Great tips bro I appreciate your time sharing. I have the same motor in my Kenworth

Egr and do do it is right lol, great info anything to help some one get down the road and save some dollars

Love the vids. Had trouble staying engaged because of the pace. Found the 1.5 playback feature and will now be able to watch them no problem! Keep up the good work

@MakeCentsTrucking

3 жыл бұрын

Awesome, thank you!

Good stuff- I have a 2350 2013 six - I spend way too much time on side of road resetting egr codes :)

I followed your video to the letter and it works like a champ. Thank you

@MakeCentsTrucking

5 жыл бұрын

Thats awesome!! Glad it worked for you MM

great job. Man really good information. Keep up the good work 👌

It's called the egr temp sensor. Its located in the exhaust gas mass measurement flow assembly. The ecm determines where the turbo nozzle and the egr valve should be at flow wise based on the intake temp/pressure sensor, the egr temp sensor and the egr differential pressure sensor readings are at. If your engine is at all under warranty, do not do this. Your better off going to the tail shaft of the transmission and disconnecting the vss (vehicle speed sensor) then getting to your preferred shop. These systems are extremely sensitive and disabling a base engine system is going to cost you in down stream exhaust maintenance.

@vlucero79

2 жыл бұрын

i would delete it after warranty

Go to a machining shop or buy kit off eBay. EGR plug kit. Fit a mushroom like bung down on the turbo were the EGR pipe fits to turbo. Stops all gases going up EGR pipe. Egr will still open but no gases are entering pipe. DOT can’t see a thing. Then get a dpf delete at tuners.

FYI. I just decided to try the egr temp trick on my paccar mx13 kw t660 and it works and motor runs fine if I can add pictures I will I've never commented on here before but watched lots of your videos. PS the lane honey video make me decide to start a brokerage it will be up and running by November I'm waiting for funding to get the assurity Bond.. keep it up

@joemcqueen8019

4 жыл бұрын

Ok 150 miles down the road my mileage went up .8 miles per gallon and I'm in Pennsylvania on i80 east so there's hills.. it works on a paccar mx 13 epa 10 kw t660

@joemcqueen8019

4 жыл бұрын

Ok update time.. I unplugged EGR temp sensor and EGR DPS sensor differential pressure sensor those two shut off the EGR on my pack are MX-13 EPA 10 model Yes I feel mileage went up over 2 miles per gallon on a 600 mi run through Pennsylvania on 80 up and down hills The problem is when I shut my truck off and turned it back on it said it into d-rate it has been a full day of going from shop to shop putting a new diesel dozer on And now I'm at pacar Kenworth in South bend Indiana getting the truck set in regen to clean the filter because the d rate only decreased my fuel supply still allowing me to go 75 but without a trailer I'm sure with a trailer I would not be doing that fast at all so yes if you're in a pinch you can get home doing this with a pack car and it will shut off your EGR and DPF systems but The moment you turn your truck off and turn the key back on expect a derate

@joemcqueen8019

4 жыл бұрын

Next update lol I just shipped off my ECU to a company to get tUUUned.. 😁 so I'll have it back by Monday or Tuesday and then I'll update yall on how it goes. Again I have a paccar mx 13 epa 10 kw t660

@joemcqueen8019

4 жыл бұрын

Ok I got the ECM back reinstalled it turn the key on and started my truck. No engine lights no d rates no problems works great krazy on highways hooked it up and I just did a 70 mile trip getting 6.6 mi to the gallon next will be an overhead valve adjustment then this thing should be running tip-top in the 8s.

@lballardblunt5756

4 жыл бұрын

Joe McQueen I have a 2014 t660 Mx-13. How is the truck running with the tune? Who did your tune!

I had problem with my engine Cummins isx 15 delta pressure sensor. I replaced the sensor and my check engine light still on..could run with check engine lights on til it disappear

Man I thought you had messed up your K whopper!!! Good info

@MakeCentsTrucking

6 жыл бұрын

Miguel L lol that’s why I wanted to show on a video so you can see it’s all good. Thanks brother

I love the video

thank you for all the info you are cheering if you please let me know which ecm tuning you use

Oh fuck! Hearing yer engine just makes me happier than shit!! Mine sounds like it's gonna drop a crank on the climb. Usually tho, I'm waitin for a rocker shaft to exit the engine bay via my hood 😂

Hey MakeCents! Need some input! Got a 2350 that goes into some sort of regen with no lights or codes. Can I unplug this to keep it from a constant regen until I get it to the right place? Thanks!

My western has that same whistle, unplugged it and it's gone. Now what's the actual cause of the whistle? I do most of my own work and am learning this whole dpf, def bullshit. I am really leaning towards the "bump" in the road here in PA that will make it all fall off...lol

So I have that noise on my turbo to only when idling . What you think is the problem ?? But if I unplug the deltap sensor stops.

SOUNDS DAM GOOD TO ME!!!!!!👍🏾👍🏾

I’m in the middle of Montana and I’m getting fault code 3216, my nox inlet sensor, I’m probably going to be derated before I get to nearest town, will this help me avoid a tow bill?

Man, I was sure hoping this would work on my old 2011 Kenworth T700 to get me to the nearest TA if nothing else. Unfortunately, I will be calling and paying a road guy.

I'm getting that exact noise on my ISX. I thought it was a blown turbo. Anyway, do you know what it costs to fix that issue?

Would help if that sensor is replaced or cleaned?

I had 13 Peterbilt Paccar, it was having DEF problem every time once I deleted I did not have any issue whatsoever EGR or DEF 3 years . peace of mind

Great Video. And War Eagle. I have a 2015 prostar with 15-litre big block Cummins. Problem I'm having is the def- showing that it's empty and the truck is derated to 5 mph.

@MakeCentsTrucking

6 жыл бұрын

UGH. Been there with a NOx sensor. May try unplugging it and back up. It may be a short in wiring or... hell who knows with these wiring harnesses on wheels lol

@Hamshack73

5 жыл бұрын

MakeCents I’m having the same issue. Are you telling us to unplug the nox sensor or what?

@BSAVAGE26

4 жыл бұрын

Did you ever get that fixed I'm having the same issue def reading empty and derate

@darrinhunter8413

2 жыл бұрын

@@BSAVAGE26 I had that same problem with my ProStar International. Def light blinking. It was the inlit and outline knoc sensors

I tried this and now my CB radio doesn't work should I replace my bunk heater now

@MakeCentsTrucking

5 жыл бұрын

No, haven't you heard anything I've said! Its the throttle position sensor in your tranny man, pull that from the side of turbo lol

@FenderFingers72

5 жыл бұрын

@@MakeCentsTrucking haha thought I was outta blinker fluid. Gave a like.

@MakeCentsTrucking

5 жыл бұрын

You just need a longer wheel base. I'll lone you my frame stretcher in you're ever around Ga :)

Hey Sammy, what about the Cummins ISX Engines in those 2016 ProStars, that Lone Mountain sales? Do you think they are CM2350s? Thinking about grabbing one from them, but I’m terrified of DEF, DPF, EGR, SCR, issues.

@MakeCentsTrucking

3 жыл бұрын

Yeah thats a 2350. IF you do, email me and lets talk. Just title it OG Solid :) Leave me a No. to call you

Brother do the mx13 paccar have a plug like that?

Do u no wat causes it to ramp up and whistle my 2250 is doing it

Awesome info... over 97k views and only 1.5k likes....Cmon guys this man is droppin gems...click the thumb already

Thank you my w9 kept derating this helped me

@MakeCentsTrucking

5 жыл бұрын

awesome!

I've just bought a 09 t800 kw with isx15 why do you prefer the 07-09 vs the newer models?? And is this magic plug in the same general area on it? I will be doing a full delete on it just need to make some money with it beforehand.

@MakeCentsTrucking

5 жыл бұрын

Those are stronger engines. I'd rather have those blocks. But newer is more fuel efficient. Plug and location is different. Check out Rawze's collection channel. He has some videos on an egr tune up on that engine. Magic plug is the EGR temp sensor.

Worked on my 386 pete.

@MakeCentsTrucking

6 жыл бұрын

Awesome!

tricky tricky I'll keep my old cat

Can't stand that garbage! I've got a 2010 Columbia with the original Mercedes Benz MBE motor. They don't make those EGRs anymore, they are all remanufactured parts. Just went through three of them before I finally got a good one! My buddy has the same truck, he went through 4 of them last year before he got a good one. I've had this truck for two years now, and the only thing I've had trouble with is the EGR and DPF! It's garbage! Great motors get a bad reputation from the emissions crap. Just glad it's got a shutdown override button! This truck has never left me on the side of the road! Haven't needed a wrecker yet! :) Keep that rubber turning!

@MakeCentsTrucking

6 жыл бұрын

I agree

@Shoker96

6 жыл бұрын

Alot of people bash the Mercedes engine(most of them actually never owned or worked on one) but they are not bad motors.the egr valve went bad on me twice third time it was egr delete time.never had problem after tht truck ran great!!

If you go into def derate on a Cummins unplug your seed sensor on the transmission on a paccar mx pull out the abs relay

@MakeCentsTrucking

6 жыл бұрын

Thanks for that DT. Good info

@SILENTTRUCKERKW

6 жыл бұрын

Diesel_Tech I learned that to !!

@ephesians3987

5 жыл бұрын

What if the turbo won’t boost past 20lbs??

@AmarjitBajwa-td4gl

6 ай бұрын

Buy a code deleting sensor.

@breadn5556

4 ай бұрын

Same applies for Cummins

Hey bro I got 12 t660 kenworth got check engine and it says EGR and white smoke comes mostly hill areas power is ok will it still work if I take that plug off

@raymondpennix4316

2 жыл бұрын

Same here. I have a 12 t660 with a 12 isx. Same issue..had Egr plugged codes and while smoke flying like crazy when pulling any kind of inclines. All the smoke cause the manual parked regen light to come on then the red stop engine light. So I tried unplug this plug and we'll what do you know..red stop engine light went out and down the road I went with no problems. I'll be plugging it back up in when I get to my destination and do a parked regen.

Great info! Where’s the plug on the 09 engines?

@MakeCentsTrucking

5 жыл бұрын

Check out Egr tune up 1-6 on (Rawze's collection) Channel. He has that engine and you'll see where it is

@netomag2152

5 жыл бұрын

Thanks

How many miles can i run? I got a 2013 pete 587 w/isx, it is running after i unplugged but i want to make it home to do the delete Dpf. Im like 800 miles away from home.

@MakeCentsTrucking

5 жыл бұрын

You should be good to go :) If it gives you any issues, plug it back up and let it try and regen, then unplug again

@TheRolaurrutia

5 жыл бұрын

@@MakeCentsTrucking im trying to do it before to start driving but it doesn't want to do a regen.

@joemcqueen8019

4 жыл бұрын

It'll work I went from Jersey to South bend Indiana about 700 miles

YOU ARE AWESOME

What year do you think is best for kw cummins. Looking to get a t660

@MakeCentsTrucking

5 жыл бұрын

2014+ Truck. If you happen to find a low mileage 07-09, those are hard to beat. Probably the strongest Isx made. Just hard to find one with low miles. Under 600k would be a Gem

My engines Derated, only yellow engine symbol. Turbos not boosting past 20lbs, would this help?

@MakeCentsTrucking

5 жыл бұрын

doubt it. Seems like a nox sensor or a leak in the system.

@ephesians3987

5 жыл бұрын

MakeCents thanks bro! Buddy mechanic of mine has been telling it’s the box sensor, I’ve been putting off $600 sensor!!! I will get it now Can take the power loss. Thanks for the reply, peace

Hey makecents engine light came on code fault number 2791. Could you help

@MakeCentsTrucking

4 жыл бұрын

I have no idea. Try googling it. Isx fault code 2791 👊

@najhusainy7035

4 жыл бұрын

Thanks for the obvious lol

Oh ya!👍

Brother what can i do if I keep getting a low coolant light? Bad ecm? Can I just shut off the alarm somehow and not head to keep driving it. I bought new low coolant sensor

@MakeCentsTrucking

4 жыл бұрын

top it off to the top. if that doesn't help I have no idea besides ecm

@bensta6133

4 жыл бұрын

I've had that same problem. Its its a sensor/float inside the plastic coolant reservoir. I had the reservoir swapped out, problem solved.

This might be a stupid question, what would stop you from deleting the scr and EGR and DPF and just leaving that plug out?

@MakeCentsTrucking

3 жыл бұрын

Dpf and scr will soot up and clog. It will eventually shut you down. Needing a regen

@scoobertjoo

3 жыл бұрын

@@MakeCentsTrucking but if you gutted both of them?

Will this work on a 2019 engine?

@MakeCentsTrucking

2 жыл бұрын

Probably. Unplug and and see. If it continues to run. You’re good if not. Hook it back up 👊 only ok Cummins tho. It sure with the other engines

I’m guessing it’s even better on a Cummins that doesn’t have a DPF filter ?

@patrickdolan.

Жыл бұрын

I've read you can leave it unplugged forever if you don't have def filter

Didn't work for me. My 2015 ISX POWERED PROSTAR INTERNATIONAL ISNT DOING JACK. IT WONT EVEN FORCE REGEN BUT IT WILL GET UP TO SPEED.

Only thing wrong with that Chevy is the Bulldog tag on the front lol

@MakeCentsTrucking

6 жыл бұрын

Go Dawgs! Cant take that form me EC, been a Dawg fan my whole life and we get this far is amazing :):):)

@cleckler2935

6 жыл бұрын

MakeCents Oh yea man, I'm looking forward to next week. Y'all gonna be tough. I'm from NC but my dad is from AL. We've all been bama fans our whole lives too even back when there was little hope lol. So, I know how you feel.

@MakeCentsTrucking

6 жыл бұрын

EC Truckin I cant wait. If they remain clam and have fun I think they’ll be tough on Saban. I can’t wait. I remember before Saban, the fans for AL were scarce lol Then the championship and the fans were everywhere 😂 but hey people love a winning team, can’t blame them. Alabama is a damn good team. I’m a fan, unless my Dawgs are playing lol Going to be a good game

@cleckler2935

6 жыл бұрын

MakeCents yea, Before Saban no one knew who the Tide was. Only thing people knew was something about a Bear lol I'm all Sec so if it went to Georgia I'm ok with that. I hope it's a nail bighter the whole game.

I have a 660 was thinking on the delete but is not giving me a problem so am waiting see wat happen ... ok boss be safe out there

@obedconcepcionjr

6 жыл бұрын

fat guy no more Idk if is a good idea off delete the complete stuff some people say is ok some people say is no good cuz the engine was build with all that emissions

@obedconcepcionjr

6 жыл бұрын

fat guy no more here in Michigan the delete run for 3500$ let see went I can check that out but I know for sure my 06 volvo hat more balls that’s this 2013 kw 660 500 hp no balls run super smooth at hwy speed

@obedconcepcionjr

6 жыл бұрын

fat guy no more the volvo was a 450 hp 1.3 millón miles this This kw 500 hp It don’t feel like it was in the dealer ship in December it show is shooting the 500 hp idk I was looking to get a 2001 kw 900 but no one wants to finance a old truck even with reman Eng and remand trans so I end up with this 2013 kw no problem getting it finance

@obedconcepcionjr

6 жыл бұрын

fat guy tell me about it I noticed driver are going faster I use to like driving 62 65 mph with this elog crap I have to run 67 70 I run mi oh ky tn Georgia

@TheEemmaannueell

6 жыл бұрын

I have a 660 as well and did the complete delete on it and so far I haven’t had ANY issues! The engine runs a bit cooler and saves some fuel! I’m also planning later on to just do it straight pipe and leave the filter on the truck just in case!

U know Pete’s have cummins 2 right ??

Will doing that give the engine full power ?

@MakeCentsTrucking

6 жыл бұрын

It's all in a tune. You can tune it to what ever you want it at. Not meaning the engine will hold up afterward though lol With these new Isx's, its safe for 500hp with boost setting no more than 32ish lbs.

Will it work on a Cummins isx 15 with a auto, my engine is a 13

@MakeCentsTrucking

6 жыл бұрын

yup. Trans has nothing to do with it. But truck manufacture may keep it from running. wont know until you unplug

@turbooomann

6 жыл бұрын

@@MakeCentsTrucking yea I just tried it but it's still in limp mode... only 5mph

@MakeCentsTrucking

6 жыл бұрын

It's not EGR related.. last time I had a 5mph derate and plug wouldn't work, It was a nox sensor.

Will this still work for a kwt680 cummins? Having problems with stop engine light at the moment please help out.

@MakeCentsTrucking

3 жыл бұрын

yes it will still work. But it'll only get you so far. You're having sensor issues or clogged canisters for check engine lights if you can unplug and it continues to run. It'll still show a check engine light becasue it's unplugged, but it should run enough to get you down the road to get parts or to a shop :)

@tammywhite7581

3 жыл бұрын

@@MakeCentsTrucking got the derate fixed. where would this be located on my 2016 isx15?

@colombiangoon3389

3 жыл бұрын

@@tammywhite7581 did you get it fixed? I had that light turn on recently

@tammywhite7581

3 жыл бұрын

@@colombiangoon3389 Got it fixed only to find out it was a stripped harness stripped harness. Had to go outside of kw for someone to actually find it after a brand new ecm, 3 DEF pump replacements, EGR pressure valve replacement, and a harness can't think of the name of it off the top of my head. All I can same expensive.

@colombiangoon3389

3 жыл бұрын

@@tammywhite7581 ok thanks, let's say 2k to 1500

Go dawgs, I have new 2021 KW 2017 x15 motor. engine light on only 9000miles. Help. Lol

@MakeCentsTrucking

3 жыл бұрын

Warranty lol it’s prob just a bug to get worked out. I do know with an x15. Don’t baby it, let’s it run and build up the temps to burn off the soot.

What is the cons of driving it like that

@MakeCentsTrucking

5 жыл бұрын

takes longer

Plug that baby. Just plug it. Also my T600 has a Magic plug also. 1995 Detroit Series 60. Magic no EDL and no EGR. Love it. Now after the Dogs pulled off the win. And its a new year. Get out on the road, make your wife some Dollars...$$$$$$$$

@MakeCentsTrucking

6 жыл бұрын

I'm ready for it to be plugged Pete. I'm on it, I'm wide open lol

Question why u not doing the egr def delete like in the other truck if u can reply

@MakeCentsTrucking

6 жыл бұрын

I'm saving up for it. Home has been taking all my money lately, cant seem to stay away and make me some tuning money lol I will be though soon

@freddetro7020

6 жыл бұрын

Out of curiosity, what's a delete going to cost you? If you don't mind sharing that info. Oh, and I'm going to try and unplug that thing this weekend and see if it works and I'll let you know. 2010 Volvo with the Cummins ISX15-2250.

@MakeCentsTrucking

6 жыл бұрын

Fred Detro it’s going to be $2500 Fred. Yes please do. I’m curious if it will let you. If it won’t let you, it will just quit running shortly after you crank it. If that’s the case just plug it back up.

@freddetro7020

6 жыл бұрын

MakeCents I'm sorry I didn't get back to you earlier. I didn't work. The engine ran about two minutes, through a code-I forget what it was, then died. I plugged it right back in, but the code stayed active. I have my own insite software so I just reset it and it never came back. Sorry again-just been busy and forgot.

@freddetro7020

6 жыл бұрын

Hey, sure would like to know the name of your guy who does this for you and whatever else he does. I know you don't like to give out his name so it's okay. I get it.

👍😉

Shit for what I see on your dash is 17 degrees outside

Hmmm, that's strange. My 2014 W9 doesn't seem to have ANY of that crap on it. I know what must have happened to it, when I got that sumbitch, I hit a big ole bump, and ALL that shit "accidentally" fell out. Maybe I should go back and look for it? Nah, she runs real nice without it, and the DEF tank made a great reservoir for my wet line. LMFAO !

@MakeCentsTrucking

6 жыл бұрын

lmao I've got get mine like yours asap.

@CumminsDslPwr

6 жыл бұрын

Do you want the GPS coordinates to where that "bump" I hit was? LMAO !

@MakeCentsTrucking

6 жыл бұрын

CumminsDslPwr I know where a good “bump” is down here in Griffin Ga myself 😆😆😆 I’m just so ready to get it done

@Turtle_the_fupa_slayer

6 жыл бұрын

Yep just hit that “pothole” today. So much better road from there on.

What was that sensor called??

@pantherelio

4 жыл бұрын

Egr Temp Sensor

How do you know if it's the Eg r got you on the side of the road

@MakeCentsTrucking

6 жыл бұрын

EGR is main reason we all have break downs these days. If youre getting a shut down and engine quits running and you have plenty oil and coolant, most likely its a emission sensor. Thats been my experience anyways. Plus on alot of these newer trucks, there are Engine diagnostics to let you know what it is. If you are unsure, unplug and see if it will run.

@bryancrowe

6 жыл бұрын

MakeCents hey I just got a new Inlet nox sensor in Chicago made it all the way at the Sioux City and it's cold of course but damn all types of stuff started happening D rated I'm getting ready to get a rental truck I left the truck set for day and a half from this morning went out there and all the codes are gone next time it happens I'm going to give that a try thanks

@MakeCentsTrucking

6 жыл бұрын

Those NOx sensors are a &&*(*%! I had one go out in Amarillo at the Flying J. Derated me to 3MPH, I took the side service street all the way to Cummins lol Even with that it would still run. Hopefully you get that thing going man, best of luck. And for sure, try it and see how it go's. It saved my butt more than once on last truck before I deleted

@wb2679

5 жыл бұрын

Very few X motors come in for egr issues, what this does is disables the egr valve that was the reason for the different engine sound, if your trying to get to a shop is one thing. Doing this over a long period of time will cause the engine to derate and possibly plug the cooler.

And the name of the plug/sensor is?............

@MakeCentsTrucking

5 жыл бұрын

egr temp sensor

@manuelsalgado8510

5 жыл бұрын

MakeCents fast reply brother, I appreciate it. Great video

Just buy a glider.........

Hey man, I’m a cummins tech. This plug you guys call the magic plug is actually the EGR differential pressure connector. No offense to you because your not a professional tech. But, if I were you I wouldn’t let anyone at Cummins know you drove this truck with that plug disconnected. Your warranty will be VOIDED. Personally, if I had my way I’d turn the job away. You guys think your helping other truckers out, your not. Your screwing them over by telling them this bogus bullshit. You’ve been warned, so please stop telling others FALSE INFO about the Cummins engine.

@MakeCentsTrucking

5 жыл бұрын

No offense, but if you're going to give advice, drive one and see the difference. Most of you "Professional Techs" say the same ole song and dance. You know how to plug in and repeat what a computer says lol Driving and keeping them running is a lot different that diagnosing and NOT fitting the bill. I haven't been in a "Professional Tech" shop since 2015. Think I'll stick to my advice. Also, if you want your points to be valid... Know the difference between a Differential Pressure sensor VS. a EGR Temp sensor, js

@80sfordguy

5 жыл бұрын

MakeCents, I’m sorry man, but the COMMON magic plug that you truckers point out to me on the engine and call it the (magic plug) is the EGR Differential pressure sensor on the EGR Mass Measurement Flow Assembly forward of the EGR Valve. The one you messed with in this video is the EGR temp sensor. I know the difference between all 4 EGR sensors. In any case man, if ANY Cummins shop plugs in to your or any other trucks ECM and finds a specific code that’ll be all they need to void your warranty. We Cummins techs know about these specific fault codes from doing what’s called circuit response tests. If and then it becomes negligence by the owner/operator once it’s been determined that the vehicle was ignored and driven anyway. It doesn’t matter wether there is a check engine light or not. There will be a MIL light on CM2250 an newer trucks and no light on CM871 and older trucks. Yes, EGR issues do cause Aftertreatment faults and vise versa. Either way, unplugging and driving the truck with a emissions sensor unplugged is not only a DOT issue it’s a Cummins Warranty issue. So, by all means keep helping other truckers lose their warranty by unplugging ANY emissions sensor and driving it like that. By the way, no not all Cummins techs just plug in to diagnose. You do plug in to find a vague direction to start at but we have to follow Cummins CSS troubleshooting trees to fix trucks. If that’s what you think is just plugging a computer in to diagnose then so be it. I do this everyday for a living and I personally have a 98% repair rate meaning I rarely have ANY comebacks or false diagnoses. I’m just telling you what you portrayed in this video is going to hurt truckers more in their wallet than getting it fixed at a proper Cummins certified shop rather than the old school backyard mechanic. Those days are gone for a reason, too many screwups and not enough VALID repairs. Like Rodney Dangerfield says (NO OFFENSE 👌)!!!

@Silvervwolfee

4 жыл бұрын

You techs are telling us to NOT work around an issue and that it will cause harm downstream Ok I believe you but you're not telling us why specifically. We don't care about codes we just want to earn a living. What damage does unplugging this sensor do? Unplugging a sensor is a good option as opposed to a $2,000 tow bill!

@Silvervwolfee

4 жыл бұрын

I drive a Volvo. After I bought this truck it would go into derate. I would take it to the dealer and drop 2-4,000 dollars a pop. The factory trained techs couldn't find the problem.... Over and over again 2-4,000 dollars!!!!! I had to file bankruptcy last year due to this recurring problem. Finally one morning I got up to take off and the truck was flat dead... Nothin... Lights... Radio... Everything dead. O boy here we go again another 2-4000 repair bill. Called a nearby dealer and gave him my tale og woes. He told me to check the battery main disconnect switch. The nuts were finger tight!! Bolted the cables together and havent had a problem since! This little issue cost me 10's of thousands of dollars! So you can see why I am less than confident in factory trained technicians.

@marede1234

4 жыл бұрын

Michael Blosser u

Thumbs up brother. I was on the side of the road with a red stop engine code. My brother and I both saw this previously and pulled it up. Disconnected the magic plug and was able to drive from Iowa to MD. After a couple hundred miles, the , the red stop engine went away and the bell stopped dinging. Only had check engine light. Man you saved my ass as well as a couple grand in shop and tow bills. If I ever run into you....drinks on me.

Thumbs up brother. I was on the side of the road with a red stop engine code. My brother and I both saw this previously and pulled it up. Disconnected the magic plug and was able to drive from Iowa to MD. After a couple hundred miles, the , the red stop engine went away and the bell stopped dinging. Only had check engine light. Man you saved my ass as well as a couple grand in shop and tow bills. If I ever run into you....drinks on me.

Thumbs up brother. I was on the side of the road with a red stop engine code. My brother and I both saw this previously and pulled it up. Disconnected the magic plug and was able to drive from Iowa to MD. After a couple hundred miles, the , the red stop engine went away and the bell stopped dinging. Only had check engine light. Man you saved my ass as well as a couple grand in shop and tow bills. If I ever run into you....drinks on me.

Thumbs up brother. I was on the side of the road with a red stop engine code. My brother and I both saw this previously and pulled it up. Disconnected the magic plug and was able to drive from Iowa to MD. After a couple hundred miles, the , the red stop engine went away and the bell stopped dinging. Only had check engine light. Man you saved my ass as well as a couple grand in shop and tow bills. If I ever run into you....drinks on me.

@MakeCentsTrucking

5 жыл бұрын

Thats awesome!! So glad to hear it worked for you bro!! Sounds like a plan man, see you then :):):)