How to Replace Front Sway Bar Links 07-12 Nissan Altima
Автокөліктер мен көлік құралдары
Buy Now!
New Sway Bar Link Set from 1AAuto.com 1aau.to/ia/1ASFK01788
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2007-12 Nissan Altima
• Check here for more videos on the 2007-12 Nissan Altima: • Nissan Altima 2007-201...
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• 20mm Wrench
• 18mm Socket 1aau.to/odg/1AXAA00043
• 21mm Socket 1aau.to/odg/1AXAA00043
• Locking Pliers 1aau.to/oX/1AXAA00139
• 1/2 Inch Air Impact Gun 1aau.to/oac/1AXAA00252
• Socket Extensions 1aau.to/ohC/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oeP/1AXAA00044
Subscribe: / @trq
Check out our playlist:
Nissan Altima 2007-2012 4th Gen: • Nissan Altima 2007-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 25
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
Great video but when I replaced my sway bar links on 2012 altima, I had to raise the jack up the control arm to take the tension off the sway bar otherwise it won't come off. Just a FYI...
Your videos are so quick smooth and informative and nothing gets left out. Thank you.
he is the best to be honest,they way he explains ,I love all your videso,they tried to ripped me off with $700 in labor by replacing the outter tie rod end,sway bars and oil cooler gasket
I just did mine front one and this time time was a pain. To remove them last time was easier so now i ll do these one every year better. At least. Doing this vibration on my tires yeee. I recommend this.
My man. Thank you so much
Had to bust out the torch for mines also ! Spent 2 hours tryna do it without it but I have one now lol
What type of vice grip are you using?
torqued 👍
Tnx, but your link for tools for locking plier is different then one you used. Can you please give us the right link for locking plier used on the video.
does this process require alignment as well?
Does anybody know the range/measurement of these endlinks from stud to stud?
Would this be the same on a 2017? I can't find a single video for how to do it on a 2017 Nissan Altima
@joshdiehl8737
2 жыл бұрын
Probably not exactly the same but probably not super different either.
Dose anyone know what size drill bit would be used for this
@VoltisArt
2 жыл бұрын
No drilling was done here, so no drill bits at all. If you're talking about the sockets for the nuts and bolts, that depends on the part. They're around 17 to 20mm for at least a few Nissan models in this period, (I'm not sure about large trucks or little things like Versa) and may be different between the nut and bolt. The replacement bolts may also be different from what's coming off. The only way to know is to have the part in front of you.
Do you have a more specific name for those locking pliers?
@TRQ
Жыл бұрын
+Brian Kelley They can also be known as a vice grip or mole wrench.
Vericle
Can this be done without power tools??
@luisamoa2500
4 жыл бұрын
Yes, but i highly recommend pb blaster penetrating fluid and have the nut soak before attempting removal.
What are the symptoms of bad sway bar links?
@tbenoit83
3 жыл бұрын
tok tokatok
@remgroup8401
3 жыл бұрын
Tommy Benoit Nailed it 😂😂 and im a newbie mechanic
I hate French Nissans… ughh wife