The subtle humor in this video was 👌🏼👌🏼

@StatUpBox

3 ай бұрын

👍😊

This was the best tutorial I've ever seen. It's exactly what I thought I would need to do but extra piece of mind knowing that it is the easy way to do it and the subtle humor had me watch the whole video instead of just skipping to the part that confirms using a jack to lift the suspension is the easiest way to remove the old and install the new 😆

“Last thing You want to do on a clear sunny day is to die” 🤣🤣 but very informative and direct 👍🏾 this a good one

@tyo6896

2 жыл бұрын

Instant sub for that right there, happy labor day.

@zefti4980

2 жыл бұрын

🤣

@rasmadrak

2 жыл бұрын

Haha! :D

@JonathanPuddle

Жыл бұрын

Hilarious 😆

@tonybraham8288

Жыл бұрын

😂😂😂😂

Thanks. That idea of lifting up the suspension might just do it. I've been levering the stabiliser bar down to get the new connector in with no luck. 10 mins later...YUP! Bottle Jack under the hub doodad, that did it! THANK YOU BIGTIME from France.

Thank you SO much!!! I thought I ordered the wrong size. Raising the suspension saved me. This was my first time replacing the sway bar link and you saved me.

@StatUpBox

Жыл бұрын

awesome! 👍😊

Thank you! Couldn't find out why my stabilizer won't fit and was "too big". Found your video and was lucky enough that I had two jacks and could rise the suspension, excellent 🤗

Yss I am super strong kind sir. I am glad someone noticed.

After twenty or so videos, this video is THE BEST!

I’m still gonna pay my mechanic to do it. But as someone who has never worked on my vehicles, these videos help me to understand the issue! Thanks for the video, it was really straight forward.

@sly8108

Ай бұрын

what a nice way to say youre lazy

@hayleybutler4134

Ай бұрын

@@sly8108or that I’m simply a female who was never taught mechanics nor have the tools to do the job myself? If I do the job wrong whilst learning, it will cost a lot more to fix my mistake. My mechanic has over 20 years experience.

@PapiChulo1224

23 күн бұрын

​@@sly8108if he has the means then more power to him

Really good video

@StatUpBox

Ай бұрын

Thanks!

Your presentation is detailed and so clear. Thank you.

Perfect instructor!

@StatUpBox

3 ай бұрын

thanks 😊👍

Thank You for Your video. All the other videos just showed taking it off. I was like I know I’m not crazy because the bar was the same size. Raising the suspension up did the trick. Thank You Again

I just bought a nice 3 ton low profile floor jack to replace my leaky 2-1/4 ton jack. I was going to gift/sell it, but already I've found two uses for it. One of them is this! I also recall using the jack to align the suspension when swapping out a broken control arm TWICE (both on Kia vehicles).

@StatUpBox

10 ай бұрын

Nothing better than giving a second life to a tool .💪💪

Good video … especially on a sunny day … we don’t want to die! LOL.

@StatUpBox

2 жыл бұрын

😂🤣👍

Thank you for taking the time to make this video. Both mine and my daughter’s cars need to have ours replaced. Now I know what has to be done!!!

Very helpful. Thank you so much.

It helped me a lot

Great Insights !

Great help

10/10 shoes 👟

Thanks for the video and information very helpful. I came across my Seized Sway Bar Link Nuts and just got a Angle Grinder too cut them off. Thanks for the Help. Peace

Thanks! Great explaination and easy to understand. Thumbs up! 👍🏽👍🏽

@StatUpBox

2 жыл бұрын

You're welcome!

Exactly my first thought, "I'm super strong, so there!".... But he was 100% right!!

It is good

Your clear and accurate video showed me how to change my own front sway bars links on my 2013 Explorer and saved me $80 .........although it took me about 3.5 hours.....thanks. I guess in your next video, you'll show us how to replace broken or short wheels studs like the ones u have.....lol.

@Movieman1965

3 жыл бұрын

I didn't take the time to look into this. I was at auto shop. They showed me the problem. I said go ahead. Little did I know that these things cost around $20 each. They charged me $95 each! Talk about getting fkd over! Next time I'll do some research BEFORE I say ok to repair work!

@Movieman1965

3 жыл бұрын

Total cost was $306

Good job brother. I do not have time to do it but I appreciated the explanation.

@StatUpBox

2 жыл бұрын

Glad to help😊❤👍

Great video thank you for the help got the job done

@StatUpBox

2 жыл бұрын

Glad it helped👍😊❤

Great video

Thank you for keeping beginner DIYers safe by including the e brake and wheel chocks as part of the steps 🫡

Underrated commentary

You explained in such a simple way. Thank you Sir.

Thank you that help me when I change mine 😊

@StatUpBox

Жыл бұрын

Glad it helped

good lesson

Great!!!!. Did mine today on my Renault espace.

@StatUpBox

Жыл бұрын

awesome!💪

Thanks!!Youre a great teacher!! ❤ I subbed

@StatUpBox

10 ай бұрын

Thanks. Awesome 👍

Thanks 👍 will do my own one instead of sending it to the shop.

@StatUpBox

Жыл бұрын

awesome!

Thanks for help..I learn much

@StatUpBox

5 ай бұрын

Happy to help

Mechanic ❤❤❤

Nice video :) I appreciate it :)

@StatUpBox

7 ай бұрын

Thanks !👍❤

If you're having issues with newer models (I have an 2013 Toyota Corolla) due to the way the bottom assembly is structured I was able to remove the bottom link(nut) by angling my own "breaker bar" like he made in this video and then going clockwise to break and unscrew the nut. I still had some difficulty removing the nut due to the limited opening however, it's possible. YOU CAN DO IT 👍🏿 just say a prayer😁 (I really did).

@StatUpBox

3 жыл бұрын

Awesome tip!!👍💪😁

@djmobn

2 жыл бұрын

@@StatUpBox can I change mine without removing tires

@0nionsHaveL4yers

Жыл бұрын

What were the torque specifications for your Link Rod nut?

@devonvidler5545

Жыл бұрын

@@djmobn no its gotta come off just use a 4 way or breaker bar

Very clean job. How about a 2007 automatic Toyota matrix 1.8L ?

Thank ❤

@StatUpBox

Жыл бұрын

your welcome 😊👍

Please make one for cv boot repair

My Dad thought me to put the Wheel under The Vehicle when working on truck it can save lives ❤

@StatUpBox

Жыл бұрын

😊👍❤

Just saying missing lugnuts creates enough weight imbalance to vibrates wheel and cause bushings and links to wear faster

@32VInTechV8

4 ай бұрын

all the lug nuts were there, just 2 of them were black and blended in with the color of the wheel.

@gamerknown

2 ай бұрын

@@32VInTechV8looks like he has 4/5 studs to me

I wish I could fit in impact gun for the bottom one. Right angle impact?

Some times you have to cut the link out if the nuts are rusted extensively and you don't have a back nut. The Allen wrench will just strip when you try to turn the nut. It's much easier if you are replacing the strut at the same time.

I've always put a tyre under the car when doing these jobs thought I was the only one haha

If the stabilizer does not turn does it mean it is ok even though the rubber is cut

Is it possible to install stabilizer links upside down?

I love when "mechanics" videos shown are in states that obviously has now road salt from the freezing weather, how about doing videos where every f ing thing is rusted to $h!t !

@michaelsepulveda8606

2 жыл бұрын

Who told you to live where u do it ain’t his fault he don’t live where u do it’s actually a really good video

@thomasjohannsen3408

2 жыл бұрын

Lmao 🤣 🤣 I feel your pain. MN

@dennisxiong7373

Жыл бұрын

😂😂

@dame216dame

Жыл бұрын

I agree …..rust belt native😂😂😂

@dame216dame

Жыл бұрын

I agree …..rust belt native😂😂😂

Yes we don't want to die lol

@StatUpBox

2 жыл бұрын

😂🤣

Always replace both sides together and if you jack up both ends you won’t have the suspension issue.

That’s MOOG parts , how long does it last .

So the swaybar links are not supposed to pivot??? Damn I didn’t know that here I am adjusting my coil over height up and down trying to fix the issue when the issue is the friggin swaybar links are busted. Is it still OK to drive for a fewdays if it pivots like that, of course, have it bolted in as usual?

When Replacing The Sway bar links do i need an Alignment Afterwards?

@StatUpBox

Жыл бұрын

www.google.com/search?q=sway+bar+link+need+alignment&rlz=1C1ONGR_enUS1014US1014&oq=sway+bar+link+need+alignment&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIKCAEQIRgWGB0YHtIBCDY3MDNqMGo3qAIAsAIA&sourceid=chrome&ie=UTF-8

Sway bar links that doesn't come with a hex insert or a nut behind is the worst. U can turn a 3hr job into a 2days job

@nicholasnagy2848

Жыл бұрын

Use a Sawzall or a grinder to cut the threaded stems and then take it off. Few minutes tops.

@johnkozarevich3552

10 ай бұрын

If you plan on keeping the car for a while be sure to purchase replacement links with back nuts. Allen hex holders are worthless in removing since the nut is likely so rusted the Allen wrench will just strip.

@1:27 One of these things is not like the others(well two actually but one of them is more unlike the others than the other unlike one).

@StatUpBox

4 жыл бұрын

A good riddle is always welcome.

All or most vehicles install the same way?

No one's going to point out that this wheel was held on with three bolts 🤣🤣🤣

Kindly someone please tell me the length of this rod.

@canileaveitblank1476

Жыл бұрын

It depends on your year, make and model of vehicle.

After changing the sway bar do we have to go for allienment

@rasmadrak

2 жыл бұрын

Generally speaking, an adjustment should be made anytime the suspension is modified.

That's the sway bar drop links

Not surprised broken ones are moog

@eddiesgsr

2 жыл бұрын

@justsayno at one point moog was great but now its a roll of the dice. Some are even made in China

Any advise for when it starts free spinning when I try to take the nut off??? 😳

@StatUpBox

2 жыл бұрын

did you place the wrench on the back, and laid it against the top body ? is it the same size?

@HFTYKCK

2 жыл бұрын

@@StatUpBox I ended up cutting it off, there's nothing to grab on the back side as it appears to be a ball in a socket.

@HFTYKCK

2 жыл бұрын

O==[] this is my best visual representation

@StatUpBox

2 жыл бұрын

here at the statupbox team we salute you! you are DIY veteran. yes, that is one option, at the end you are not going to use the old part again, unless for a trophy, for the day you showed it who is the boss!!! 💪😎👍😂❤

You said if your parking brake is a hand lever to pick it up... MY HAND LEVER ONLY PULLS BACK!!!! WHAT DO I DOOO 😱

@StatUpBox

2 жыл бұрын

😱😱🤣😂

It would not be so easy to remove the nuts if you car is old and the nuts are all rusted, and your sway bars do not have a hex nut in the back, but a useless hex hole in the front. Cutting the nuts would be the only option in that case.

@taybahmohammad5230

6 ай бұрын

yeah unfortunately i had to deal with this yesterday and spent an hour trying to cut the things off

hey those lug studs arent that hard to replace haha

Just paid 1400 to get this done smh

@CK-1000

Жыл бұрын

Did you go to a dealer?