This helped me replace my parents faucet this afternoon. Thank you!

@diypotentials

Жыл бұрын

That is awesome 👏 Congrats!

I first found your KZread handle from another video (where you install the Hauslane range hood). Then saw this one. Exactly the two things I'm dealing right now. Thank you!

Great, thorough video! I just bought this faucet tonight and will install it tomorrow. I’m sure I’ll be watching again just to make sure I don’t miss anything lol!

@diypotentials

Жыл бұрын

Good luck on your project…I hope it will go well. Thanks!

Thank you for the video which is very helpful for my new kitchen faucet installation!

@diypotentials

11 ай бұрын

I’m glad it was helpful. Thank you!

Thank you for the fantastic video!

Thanks for the vid. I was able to get the nut loose with some seafoam deep creep and a Husky basin wrench from homdepot. You may want to link a basin wrench in your description for other weekend warriors.

Thank you. Very helpful. Mine was rusted on too. Used grinder too but also used a multi tool inside grinder cut to inner pipe. No wrenching needed to remove mounting.

@diypotentials

Жыл бұрын

Congrats! I’m glad it worked out. Thanks!

We’re having same problem - thinking of replacing soon great video ✌️😎

@diypotentials

Жыл бұрын

Good luck on your replacement. Thanks!

Nice job brother. Replaced a faucet that had same issue wouldn't swivel. Luckily I was able to remove without my grinder☘️

@diypotentials

2 жыл бұрын

I hope all is well. Thanks!

There is another step in the installation which prevents leaking thru, loosening, and rusted under mount fasteners. It no longer appears in most brands instructions, but is still pertinent! Apply a layer of clear silicone caulk to the plastic ring or gasket where it attaches under the metal faucet body. And another layer between that and the countertop material. (Like buttering both sides of your bread). After tightening the undermount fasteners, wipe off the excess caulk. This small extra step prevents annoying call backs! If you ever need to replace the faucet, a minute or two with a razor blade will remove the caulk.

@diypotentials

4 ай бұрын

Awesome tips. Thank you so much! Best regards!

Hi thanks for the informative video. I’m thinking about purchasing this particular faucet. I’m curious how it’s holding up for you since you installed it? Do you like the different spray options it has?

@diypotentials

Жыл бұрын

Yes, still loving it. Thanks!

Good job! Go SF 49ers

@diypotentials

Жыл бұрын

Go Niners! Can’t wait to see the game!

Call the company depending on the brand of faucet for a free replacement. You'll need to provide them with the model of the faucet and pictures.

How did you remove the horse shoe piece from below? My faucet has the exact same piece and I can not get it off! Thank you, this video is very helpful

@diypotentials

Жыл бұрын

If I remember correctly, I used a long socket to remove the nut of the screw.. you might need an extension for the socket. Some people would use a faucet socket if they have it on hand… Also, your new replacement faucet might come a long with a faucet socket. Thanks and Good luck!

Some Wd40 or penetrating oil would help

what type of grinder saw do u need?

@diypotentials

6 ай бұрын

Any one of these grinders will do. You can also find similar ones at either Lowes or Home Depot. Harbor Freight is another place where you can get them as well. Thanks! Angle Grinder, 7.5-Amp 4-1/2 inch Electric Grinder Power Tools with Grinding and Cutting Wheels. amzn.to/4aATBDZ PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 7.5-Amp amzn.to/3GYLljJ