#howto #kitchenfaucet #plumbing See how to remove the mounting nut from this Kohler kitchen faucet.
Жүктеу.....
Пікірлер: 39
@ChrisCastillo15 ай бұрын
Thank you for this video. I couldn't even see up there behind the sink. This helped me visualize what I was dealing with so that I could get the old faucet removed.
@TheEclecticHandyman
5 ай бұрын
Glad it helped, thanks for watching! 🛠️
@PurpleDrankYoshi11 ай бұрын
THANK YOU. All the other videos showed totally different faucets and I was looking for a nut that didn't exist!
@TheEclecticHandyman
11 ай бұрын
Glad it helped! 🛠️
@daspacechoechechoz90282 ай бұрын
Never de-installed this type of faucet before. Was at a loss until I found your video. Thanks for posting!
@TheEclecticHandyman
2 ай бұрын
Glad it helped, thanks for watching! 🛠️
@danieltannenbaum966724 күн бұрын
Thanks, need a tool cuz mine is stuck on GOOD, but this helped A LOT
@jonduggan7433 Жыл бұрын
In theory...... This method is great... HOWEVER..... I've NEVER seen threads so clean on an actual faucet that needs replacement.
@TheEclecticHandyman
Жыл бұрын
Yeah I'm not sure why this faucet had such a short life (it was probably 12 years old), but the new one has been much nicer.
@mranalogy843 жыл бұрын
Thank you. I am working on one now and you saved me some fussing and cussing.
@TheEclecticHandyman
2 жыл бұрын
Glad it helped, thanks for watching!
@ritalockett97883 жыл бұрын
Informative as always. I bet the hardest part is getting under the sink,not much room there for working.
@TheEclecticHandyman
3 жыл бұрын
Yes indeed. I had to get in the mindset to get on my back and crawl under there. New faucet is nice though 😁 Thanks for watching!
@jhors77772 жыл бұрын
Thank you for posting this helpful video.
@TheEclecticHandyman
2 жыл бұрын
Glad it helped, thanks for watching!
@xx7101 Жыл бұрын
I had same issue. I wd40 from bottom and top. Removed faucet handle and spun fixture from the top using vice grips. Once loose i held mounting ring inside cabinet while partner spun fixture from top. Thanks for this helpful vid.
@TheEclecticHandyman
Жыл бұрын
Glad it helped, thanks for watching!
@azrock2353 жыл бұрын
Thanks for the info MMM! 👍🏼
@LivingLikeLarry3 жыл бұрын
You lucked out, anytime I have a plumbing job, the hardware is ancient. Great how to though. Made it look like an easy job. Also may save someone else from making that same mistake.
@jadusa012 жыл бұрын
My one-hole pull-down Kohler kitchen faucet looks the same in your video. I need help on how to replace the hot water hose. Thanks!
@todnelson7235 Жыл бұрын
I couldn't get any leverage on the ring. Partially screwed the smaller screws back in and had something to grab and start the process.
@sharonneider8514
2 ай бұрын
Going to try this next.
@hcarducci5 ай бұрын
Big help!! Thank you.
@janneydeveault9955 ай бұрын
thanks so much!
@foxywolf17773 жыл бұрын
Note to self: You don't have the good tools and you Jumpstart bodies....Call the plumber if The Eclectic Handyman is not around 🤣🐾🦊🐺
@TheEclecticHandyman
3 жыл бұрын
Hahaha! BTW can you believe on another nut under the sink I actually didn't have a socket of the right size?? I kept saying to myself, "all these tools and I still am missing some!" 😂
@foxywolf1777
3 жыл бұрын
@@TheEclecticHandyman 🤣😂
@michelebinder8074 Жыл бұрын
There's been some water leakage, and the brass looks green. It started to unscrew and then got hung up. It's loose enough that the whole faucet rotates. And gawd, what a cramped area to try to work in!
@tmcboston13 жыл бұрын
I have this exact problem... i tried a large bite basin wrench but cannot loosen this round nut. What next, grind it off with a Dremel tool? any advice or encouragement would be welcome
@TheEclecticHandyman
3 жыл бұрын
Maybe try spraying with some penetrating oil and let it sit for a while. I have a 13" Craftsman adjustable wrench I use for under the sink as it can be expanded quite wide. Hope you can get it removed!
@amazingme894Ай бұрын
Omg i didnt know it turns…. I was trying to rip out that whole ring after taking out the screws IM SO DUMB
@TheEclecticHandyman
Ай бұрын
Yeah it's deceiving for sure glad it helped! 🛠️
@stevetrivago Жыл бұрын
Thanks
@ThreePhaseHighАй бұрын
The split ring with those two tightening screws is a piece of junk. Go back to the one solid ring and tighten it up. Otherwise it’s gonna come loose all the time.
Пікірлер: 39
Thank you for this video. I couldn't even see up there behind the sink. This helped me visualize what I was dealing with so that I could get the old faucet removed.
@TheEclecticHandyman
5 ай бұрын
Glad it helped, thanks for watching! 🛠️
THANK YOU. All the other videos showed totally different faucets and I was looking for a nut that didn't exist!
@TheEclecticHandyman
11 ай бұрын
Glad it helped! 🛠️
Never de-installed this type of faucet before. Was at a loss until I found your video. Thanks for posting!
@TheEclecticHandyman
2 ай бұрын
Glad it helped, thanks for watching! 🛠️
Thanks, need a tool cuz mine is stuck on GOOD, but this helped A LOT
In theory...... This method is great... HOWEVER..... I've NEVER seen threads so clean on an actual faucet that needs replacement.
@TheEclecticHandyman
Жыл бұрын
Yeah I'm not sure why this faucet had such a short life (it was probably 12 years old), but the new one has been much nicer.
Thank you. I am working on one now and you saved me some fussing and cussing.
@TheEclecticHandyman
2 жыл бұрын
Glad it helped, thanks for watching!
Informative as always. I bet the hardest part is getting under the sink,not much room there for working.
@TheEclecticHandyman
3 жыл бұрын
Yes indeed. I had to get in the mindset to get on my back and crawl under there. New faucet is nice though 😁 Thanks for watching!
Thank you for posting this helpful video.
@TheEclecticHandyman
2 жыл бұрын
Glad it helped, thanks for watching!
I had same issue. I wd40 from bottom and top. Removed faucet handle and spun fixture from the top using vice grips. Once loose i held mounting ring inside cabinet while partner spun fixture from top. Thanks for this helpful vid.
@TheEclecticHandyman
Жыл бұрын
Glad it helped, thanks for watching!
Thanks for the info MMM! 👍🏼
You lucked out, anytime I have a plumbing job, the hardware is ancient. Great how to though. Made it look like an easy job. Also may save someone else from making that same mistake.
My one-hole pull-down Kohler kitchen faucet looks the same in your video. I need help on how to replace the hot water hose. Thanks!
I couldn't get any leverage on the ring. Partially screwed the smaller screws back in and had something to grab and start the process.
@sharonneider8514
2 ай бұрын
Going to try this next.
Big help!! Thank you.
thanks so much!
Note to self: You don't have the good tools and you Jumpstart bodies....Call the plumber if The Eclectic Handyman is not around 🤣🐾🦊🐺
@TheEclecticHandyman
3 жыл бұрын
Hahaha! BTW can you believe on another nut under the sink I actually didn't have a socket of the right size?? I kept saying to myself, "all these tools and I still am missing some!" 😂
@foxywolf1777
3 жыл бұрын
@@TheEclecticHandyman 🤣😂
There's been some water leakage, and the brass looks green. It started to unscrew and then got hung up. It's loose enough that the whole faucet rotates. And gawd, what a cramped area to try to work in!
I have this exact problem... i tried a large bite basin wrench but cannot loosen this round nut. What next, grind it off with a Dremel tool? any advice or encouragement would be welcome
@TheEclecticHandyman
3 жыл бұрын
Maybe try spraying with some penetrating oil and let it sit for a while. I have a 13" Craftsman adjustable wrench I use for under the sink as it can be expanded quite wide. Hope you can get it removed!
Omg i didnt know it turns…. I was trying to rip out that whole ring after taking out the screws IM SO DUMB
@TheEclecticHandyman
Ай бұрын
Yeah it's deceiving for sure glad it helped! 🛠️
Thanks
The split ring with those two tightening screws is a piece of junk. Go back to the one solid ring and tighten it up. Otherwise it’s gonna come loose all the time.
Put anti seize on the threads.
Ur intro is way too long ugh
@atetraxx
Ай бұрын
Skip it then ffs