How to make a Modern DIY Gas Firepit Table with Concrete Top and Stone
Тәжірибелік нұсқаулар және стиль
In this video, I will show you how I made a Gas Fire Pit table to enjoy those brisk fall/spring nights. It was a simple and rewarding build which I am sure anyone can do. I go through all the steps as well as include affiliate links below to all the material used.
Leave a comment if you found this helpful or have any questions. Enjoy and good luck with your build!!!
#FirePit, #GasFirePit, #DIYFirePit, #MakingHomeBetter
MHB T-Shirts:
amzn.to/3ZR2ODk
Resources:
• DIY Gas Fire Pit Table
Materials:
• Fire Pit Insert: amzn.to/3zWp7c2
• Fire Glass: amzn.to/2Y2qWXN
• 20 Guage Steel Studs (Home Depot)
• ¾ inch, Metal to Metal self tapping screws (Home Depot)
• Trex deck board (Home Depot)
• Durock Cement Board (Home Depot)
• Fiberglass mesh tape - amzn.to/3il37Sj
• Thinset (Menards)
• Gas Line quick connect: amzn.to/3mcguVN
• Natural Gas Line Hose: amzn.to/3urgXXW
• Gas line Tape: amzn.to/3zXi56L
• Paste Wax: amzn.to/3F2tnut
• Fondant Tool: amzn.to/3zVRM10
• Black Silicon: amzn.to/3kWg7iY
• WD40: amzn.to/3F8tQv9
• Cementall (Home Depot)
• Set Control (Home Depot)
• Flow Control (Home Depot)
• Paddle Mixer: amzn.to/3CZHKO7
• Rubber Mallet: amzn.to/2Y79rVW
• Concrete Polishing Pads: amzn.to/39P4ofI
• Cheng Concrete Sealer: amzn.to/3zXBwfC
Tools:
- Bosch Angle Grinder: amzn.to/39FouJl
- Bosch Diamond Blade: amzn.to/2WqNlgM
- Bosch CM8S Miter Saw: amzn.to/396KCwl
- Hot Glue Gun: amzn.to/2WxCdPq
- JigSaw: amzn.to/3AZhGSD
- JigSaw Blade: amzn.to/3kT2elA
- Sander: amzn.to/3BbWTvv
- Bosch 4100 Table Saw - amzn.to/3yJaVDq
- Bosch CM8S Miter Saw - amzn.to/3ABmqx5
- Bosch Drill/Driver amzn.to/3COiATw
Video Key:
00:00 - Intro
00:33 - Design
01:05 - Base
02:00 - Box
03:25 - Cement Board
04:54 - Natural Gas Line
05:54 - Stone Tiles
04:17 - Concrete Top
12:42 - Concrete Sealer
13:30 - Fire Pit Install
14:50 - Reveal
Music: www.bensound.com
Video Editing SW:
- Movie Studio 17.0 Platinum: amzn.to/3jFE0JE
- Vegas Pro 19: amzn.to/2Y1C5YH
The above links contains Affiliate Links for which the Channel may get a small commission at no expense to the viewer/buyer.
Пікірлер: 127
Love this!! Well done. Thank you for posting.
@MakingHomeBetter
Жыл бұрын
Thank you very much. More coming to this backyard...video coming out in a week or so.
Well done. And very informative and detailed. Thank you for sharing.
@MakingHomeBetter
2 жыл бұрын
Thank you.
Outstanding Job PAPA !!!!!
@MakingHomeBetter
2 жыл бұрын
Thank you
This came out great! Really well done.
@MakingHomeBetter
Жыл бұрын
Thank you for your kind words
Amazing!
@MakingHomeBetter
Жыл бұрын
Thank you
Beautiful
@MakingHomeBetter
Жыл бұрын
Thank you
Nice job! And thank you for editing your video so tightly; I normally find myself fast-forwarding unnecessarily long tutorials, but you did it all for us in the editing
@MakingHomeBetter
2 жыл бұрын
Thank you. I am still learning every time I make one of these videos and your feedback is very much appreciated.
@matthewkeethe406
2 жыл бұрын
@@MakingHomeBetter Question, Did you spray paint the bottom base black? I noticed you didn't tile that.
@MakingHomeBetter
2 жыл бұрын
@@matthewkeethe406 yes, the very bottom, I painted black as it was intended to be left open/seen. It's partially a design decision. Makes it easier and gives it a separation from the ground.
now thats a fire pit. really really nice and sleek looking. u did a wonderful job Sir.
@MakingHomeBetter
2 жыл бұрын
Thank you
That looks Amazing!! You done a Great Job on the Fire pit. Your Wife is Very Lucky to Have Someone Like You Who is So Talented.
@MakingHomeBetter
Жыл бұрын
Thank you so much
Great work ! Thank You
@MakingHomeBetter
3 ай бұрын
You are welcome.
Looks Great, Dude !
@MakingHomeBetter
11 ай бұрын
Thank you very much
GREAT video man
@MakingHomeBetter
2 жыл бұрын
Thank you
Great Job 👍👌
@MakingHomeBetter
2 жыл бұрын
Thankyou so much.
Nice Job!
@MakingHomeBetter
2 жыл бұрын
Thank you very much. As my Son called it..."Wow Dad, this might be your best project"
Great job through design, build and finish. Specifying all the detailed aspects is particularly useful. You’re at talented, craftsman, and an excellent teacher. Of course, I subscribed after all of that.
@MakingHomeBetter
Жыл бұрын
Thank you. I appreciate that.
Nice build and thanks for the video. Super helpful
@MakingHomeBetter
2 жыл бұрын
Glad to hear that!!! Good luck with yours
@matthewkeethe406
2 жыл бұрын
@@MakingHomeBetter Did you still use the LP air mixer for the natural gas?
Hello from Santa Ana California 👍🏼
@MakingHomeBetter
Жыл бұрын
Hello and hope you enjoyed the video
Well done video, thanks for sharing.
@MakingHomeBetter
4 ай бұрын
Thank you
Very nice. I may want to build one myself
@MakingHomeBetter
2 жыл бұрын
Yup, it is getting good use.
Awesome build brother.... absolutely love it❤
@MakingHomeBetter
Ай бұрын
Thank you.
Well done video.
@MakingHomeBetter
6 ай бұрын
Thank you
Nice 👍
@MakingHomeBetter
7 ай бұрын
Thank you
Great video it looks great. Just one thing. at 5:31 in the video you put thread tape on the flared part of the fitting, it is not needed there as the flare is what does the sealing and not the tape.
@MakingHomeBetter
3 ай бұрын
Thank you. That makes sense about not needing the thread tape. I will keep this in mind for the future.
Great job. I much do think you saved in the end. You ended up with something very custom built. I have seen some of these fire features about 2K. Just subscribed.
@MakingHomeBetter
Жыл бұрын
Thank you. I don't remember the exact numbers any more. But I would guess that it was roughly $400-$500. Yes a comparable one would be several thousand. More than that savings, the satisfaction that we made it makes it special, each time we use it.
Wow, awesome brother just gave me some ideas, keep up the great work! New subscriber here! Thanks
@MakingHomeBetter
2 жыл бұрын
Awesome, thank you
Really nicely done. Always wondering how it is in the real world? Do you love it, is it under or over powered? Would you do anything different?
@MakingHomeBetter
Жыл бұрын
It is great. Certainly not as powerful/hot as like a solo .. But the convenience makes up for it in my opinion. We get good use outb if it because of it.
That is a great looking fire pit, I went over the material list and I coudn't find what tile you used for the sides of the box. Also, what happened to the rebar in the video? It was there while you were marking it off to cut it and then it wasn't in the frame when you started pouring the concrete in the mold.
@MakingHomeBetter
8 ай бұрын
Thank You. The tiles are stone tiles I picked up at a local store. The rbar is embedded in the concrete. It was placed at about three quarters of the way up. Just didn't make it on the video.
Did you put tile around the bottom base? I really like the design.
@MakingHomeBetter
Жыл бұрын
Nope. Left that free, just the black spray paint.
Very nice. where did you get the ledger/stack stone?
@MakingHomeBetter
2 ай бұрын
Just a local tile store. The store was actually going out of business so picked up enough for this project and the outdoor kitchen (video posted a few weeks back)
For anyone making firepits, you need vents. This is an explosion waiting to happen if there is a gas leak. So many KZreadrs making these firepits and no vents at all. Propane needs vents as low as possible and cross wind placement and natural gas needs at top. Vents!!!
@MakingHomeBetter
4 ай бұрын
The entire fire pit is raised an inch off the ground to account for venting.
@haunthunterify
4 ай бұрын
@@MakingHomeBetter you have a natural gas connection so in your case, your vents should be near the top, not the bottom. For Propane, since Propane is heavier than air, it will sink to the bottom so vents should be at bottom.
Just finished this build. Awesome instructions! I’d love to send you the pics to show you what you taught me! Parts I struggled with: 1. Finding all the gas fittings to hook up to the home natural gas. 2. Mixing the cement-all was brutal. 3. Table saw is a must. 4. Removing the silicon from the edge of the cement corners was a struggle.
@MakingHomeBetter
Жыл бұрын
Very happy to hear that the video helped with your build. Would love to see your final product. makinghomebetter@gmail.com
Thoughts on indoor fireplace with obvious, correct ventilation.
@MakingHomeBetter
10 ай бұрын
I suppose anything is possible...but certainly have to be extra careful in how it's executed and maybe consult with some experts on the code.
Nice firepit. Wondering where you got that cool tile? Any tips on sourcing those tiles? Do they need to be specially for outdoor use, or "fire-rated"? I like the many little "over-engineering" touches in your build. How many layers of rebar inside the concrete table top? I'm wondering if there needs to be some heat-rated felt lining the sides of the opening, between the firepit box and the concrete rectangular hole insides? Probably not.
@MakingHomeBetter
Жыл бұрын
The tiles are ones I got on close out at a local store. They are not fire rated, but stone tiles, so ok for outside. Rebar, I just did one layer. And the felt, I guess it can't hurt.
@epicstays8281
Жыл бұрын
@@MakingHomeBetter About to start this build based mostly on your video. It looks like your counter size needed TWO bags of the CementAll, and so also TWO bags each of the Set Control and Flow Control? Did you have any left over, or was it close? Hard to tell in your video. Would the liquid cement color additives work ok with CementAll? About how heavy was the concrete firepit top? About how heavy was the base and box, when finished? The melamine frame was put together with, #6 or #8 x 1-1/4" screws? Thanks again for the great video content.
@MakingHomeBetter
Жыл бұрын
@@epicstays8281 Glad to know you are starting the project soon. For the size that I built, I believe I used almost all the cementall I mixed up. I have seen videos where color is added into the mix. I have not done it myself, but I suspect this will work fine. I don't have an exact weight on the fire pit, but it's certainly very heavy and won't be easy to move.
@epicstays8281
Жыл бұрын
@@MakingHomeBetter I'm wondering if I could use 1/4" Durock cement board, instead of the 1/2"... that should cut down the weight. One the thinset mortar and tile and top is on, I think it should still be pretty thick and sturdy? Don't know how much flex the Durock board is at the 1/4" vs 1/2" thickness. Thanks again.
@haunthunterify
7 ай бұрын
@@MakingHomeBetteryou could have added wheels at the bottom
Very good video, I have a question,I am going to do a fire pit and a BBQ grill on my backyard and my question is, can the gas and electricity lines go together so as not to dig another ditch? And I will need two gas lines if I am going to make a fire pit and a BBQ grill or just need one gas pipe ? the fire fit and the BBQ will be separated from each other 25 feet
@MakingHomeBetter
Жыл бұрын
I am by no means an expert on either topics. I had the gas line put in by a licensed contractor and did not run power at all. Sorry I couldn't be of more help. That being said, do subscribe as I also have a outdoor bbq in the works that I will do a video on.
When sitting around it, does it provide heat for warmth or is the flames it more decorative?
@MakingHomeBetter
Жыл бұрын
There is absolutely warmth...some days a little too much
Can you post a better picture of the demensions please
Will the thin set withstand the weather?
@MakingHomeBetter
2 жыл бұрын
My assumption/expectation is that it will. We shall see.
how could I substitue with propane? Natural Gas is not an option for me
@MakingHomeBetter
5 ай бұрын
When you buy the kit, you would need to purchase a propane version. Rest of it should be nearly the same.
What did you use for reinforce concrete coutertop? Any metal pieces dipped in?
@MakingHomeBetter
2 жыл бұрын
Yes, there is a metal mesh I added....it's in the video. This may not really be needed, but wanted to over engineer rather than the alternative.
@jayyewm.d.2853
Жыл бұрын
@@MakingHomeBetter what metal mesh is embedded in? I don't see it on your list of supplies. Great video!
@MakingHomeBetter
Жыл бұрын
@@jayyewm.d.2853 sorry for not including it. It's the metal mesh rebar available at HD.
Where did you get the stone to go on the side of the firepit?
@MakingHomeBetter
Жыл бұрын
From a local tile store. The store was actually going out of business and got it on clearance.
How is the heat output from the burner kit you got of Amazon?
@MakingHomeBetter
2 жыл бұрын
It's good... Especially on a chilly day... Certainly not as much as a roaring wood burning fire though.
@heretowellness
2 жыл бұрын
Is it cool enough on the bottom to put on a composition deck?
So, I made one of these tables. Mine cracked in 2 places while using it. I'm assuming it was from the heat of the fire. How would one go about keeping the table from getting hot and cracking?
@MakingHomeBetter
2 жыл бұрын
Interesting. I have never found the concrete to get hot to the touch. I do have two small (hairline) cracks on either side as well.
@scottpolenske9224
2 жыл бұрын
@@MakingHomeBetter I think the next top I'll make the opening slightly bigger and put some of that heat rated felt on it to insulate where the pan is close to the edge. Not where the lip sits on the table top, well maybe there also..
@MakingHomeBetter
2 жыл бұрын
@@scottpolenske9224 good plan... nothing wrong with over engineering...that's one of my favorite things to do in my builds.
Did you seal the underside of the cement?
@MakingHomeBetter
Жыл бұрын
No I did not....(not sure if that's the right thing to do though)
Why did you decide to go with metal studs instead of wooden studs?
@MakingHomeBetter
2 жыл бұрын
extra cautious being so close to fire was one of the main reasons.
Where did you get the fireplace kit
@MakingHomeBetter
2 жыл бұрын
It was from Amazon. There is a link in the description.
How many hours did this take? Thanks!
@MakingHomeBetter
27 күн бұрын
Couple of weekends for me.
Or tin snips....lol
Product is great only proud my head is small chip on Paint otherwise works great heats up Myspace quickly
@MakingHomeBetter
10 ай бұрын
Excellent
You did not add any vents, was it not necessary?
@MakingHomeBetter
2 жыл бұрын
I don't believe so. However, because the whole thing is sitting on a few composite decking boards, there should be air flow on the bottom.
Nice work - any idea on the final weight?
@MakingHomeBetter
2 жыл бұрын
Not exactly... but it's very heavy... so much so that I didn't actually attach the concrete top to the base...so that it would be somewhat easier to move it around.
Do you remember your water ratio amount you added to the concrete?
@MakingHomeBetter
Жыл бұрын
I followed the instructions on the bag 100%
Good video but what about vents? Did you forget to add vents to th sides?
@MakingHomeBetter
Жыл бұрын
The whole fire pit has about a 1 inch plus gap around the bottom. Therefore didn't add any additional.
@haunthunterify
4 ай бұрын
@@MakingHomeBetterfor natural gas, your vents need to be at top. Propane gas sinks so vents at bottom and natural gas rises so you need vents at top
Sounds good. Better clear it with your home owners insurance.
If I may what was the total cost to build?
@MakingHomeBetter
2 жыл бұрын
The various materials will play a big part. This particular one ended up being just about $500.
@bobbob2790
2 жыл бұрын
@@MakingHomeBetter excellent job my friend you just got a new subscriber can’t wait to see what you have got going next
@MakingHomeBetter
2 жыл бұрын
Thank you for the support
You don’t use tape on compression fittings. The threads are not what seals. Your asking for a leak.
@MakingHomeBetter
Жыл бұрын
Thanks for that feedback.
I would not recommend this video without a disclaimer! We are talking about gas and fire here. I know some idiots that are not mechanically inclined or carpentry inclined that would really DO IT THEMSELVES in a negligent way! I can see some fools causing a fire hazard with this.
@MakingHomeBetter
7 ай бұрын
Yes, it's absolutely critical that caution is used and not execute such a project unless you are comfortable. That being said, if approached with the right attitude, most diyers should be able to accomplish such a project. (I myself had the gas lines put in by professionals)