So cool! I finally found solution for my outdoor propane bathtub 😂😂👏👏👏🤘🤘🤘

Very cool. In the process of demolishing a house behind ours we bought to build a yard. Fire pit is on the building plan. This one is brilliant! Thanks for the video. I watched your transformation video yesterday. Wow

This was awesome! I absolutely love it. Great work❤

not bad I like the way you built it. Different but perfectly ok and very nice.

Great project and great video! Thank you for sharing!

That is 💣. Can’t wait to make ours

You really help me with my project bro ,this is a great made video thank you

Very creative… Looks great!!

@AndrewThronImprovements

3 жыл бұрын

Appreciate it, Ash!

Amazing job man!!

Super talented.

@AndrewThronImprovements

2 жыл бұрын

Appreciate it, Lashonda 👍Thanks for Watching!

Thought of this but that sitting brick wall fire pit tough to beat

This was amazing

Beautiful job dude. I just subscribed. ❤️❤️

That's awesome dude! Looks great!

@AndrewThronImprovements

2 жыл бұрын

Appreciate it! Thanks for watching!!

I've looked at a few videos and I love this the best 😀 👍🏿📣

@AndrewThronImprovements

2 жыл бұрын

I appreciate it the kind words, Rudy! Thanks for watching 👌

This is perfect for those chilly fall nights! Looks amazing, great work! :)

@AndrewThronImprovements

3 жыл бұрын

Agreed! I doubt it will get much use this summer. Thanks for watching!!!!!

@AndrewThronImprovements

3 жыл бұрын

Appreciate you!

@jamieniche

2 жыл бұрын

Does it actually give off much heat?

Unique

Well done!

@AndrewThronImprovements

2 жыл бұрын

Appreciate it! Thanks for watching!

الله يبارك ما شاء الله روعة😊

@AndrewThronImprovements

3 жыл бұрын

Appreciate it!

Thank you so much!

@AndrewThronImprovements

Жыл бұрын

You're welcome! Thanks for watching!

Cool!

Hello glad to see you again 🙌😄 I was waiting for a new video to see what you are new prepared this is awesome 👏 perfect work 👍why didn't a little closer to make something for me 🙌😄 Greetings and support from Serbia 🇷🇸❤

@AndrewThronImprovements

3 жыл бұрын

Appreciate the continued support! Thanks for watching!

Nice vid man!

@AndrewThronImprovements

3 жыл бұрын

Thanks for the continued channel support! I appreciate it!

Awesome vid. Definitely will help me when I'm ready. How did you do the sliding door?

Thank you guys so much for watching! For more details on the fire table concrete form dimensions, check out my project blog article at: atimprovements.com/diy-fire-pit-table-how-to-build-your-own/ Thanks!

Very good idea to conect to house gas line but not for propane thank

Nice video, thanks for sharing. How did the LVP planks hold up over time with heat dissipation?

Nice build 👌 New subscriber 💥🇺🇸💫

@AndrewThronImprovements

2 жыл бұрын

Thanks for the support!

You rock

@AndrewThronImprovements

3 ай бұрын

Appreciate you watching!

So do you have to turn on the propane on the tank itself every time? Or can you turn the valve on the outside you installed? Thanks man. Amazing job👍

Would love to try and build this myself. What was the total cost of the build?

Great Video - Simplest and best instructional I have see

@AndrewThronImprovements

Жыл бұрын

Glad it helped, John - Thanks for watching!

That’s an awesome build, we’ll done! I want to do one like that but I have a couple of key questions before I go ahead. How hot is the firepit? Does it keep you warm enough to stay out on chill nights? And how long the small gas bottle last? Many thanks

Awesome video thanks, how much did you spend on the project? How far must the burner and pan be from the tank?

@AndrewThronImprovements

Жыл бұрын

The more space between the burner and the tank the better! I think I spent around $800 for everything - it's a bit pricey. Thanks for watching!

Pretty cool. I noticed there was no venting or was there? Typically venting would be set low for propane on all 4 corners and higher venting for natural gas.

Great video very informative only one question is it safe to have the gas bottle next to the heat and flame please.?

Could bbq parts be substituted since they are more likely available bbq parts would work the same. They have regulators, different types of burners, tank adapters. And could pick up sheet metal from local parts shop and shape it with a metal break and welded it. Just wondering if aluminum dispersal of heat fast then just regular steel. To bring cost downs.

Great video. really enjoyed how the creativity works here. Question if i may, do you have any form of protection for your deck from the fire table's heat? I was told that there should be a type of protection to prevent the heat from ruining your deck (wood or composite). Any thoughts on this?

@AndrewThronImprovements

2 жыл бұрын

Hi Jack! I don't have anything for protection underneath my fire table. So far, the base really doesn't get hot at all. The pan get's a little warm, but nothing I would be concerned about. That said, protection is always good to have. Better safe than sorry. Thanks for watching!

Great project. How much did it cost?

Hello, could you provide more details on how you installed the drawer slides

Great build. What is the height of the base?

what a nice build! Do you have any closeups how the slides were installed? Can't tell from the video

@AndrewThronImprovements

2 жыл бұрын

Hi! Unfortunately, I do not. I just kinda "winged" it. I bought some drawer slides on amazon and then simply attached a piece of cement board to it. It wasn't perfect, but it worked for me!

Thanks a million. What was the BTU on your firepit?

Cheaper to just have bought it

I really want to make one, but i don’t think I can make the table top out of concrete since there’s no one to help me lift it, sadly. wish me luck! I’m gonna need it!

@areseses1773

2 ай бұрын

😂😂😂 I will make one too ... If you need help tell me ... It will cost you 700€ at hour😂

Great job. How much clearance do you have between the base of the burner pan and the top of the tank?

@AndrewThronImprovements

2 жыл бұрын

Hi Ed - It's approximately 6" from the top of the tank to the burner. In hindsight, I should have left more clearance. Thanks for watching!

@edt9959

2 жыл бұрын

@@AndrewThronImprovements why so?

Is that a horizontal propane tank or a vertical propane tank?

I really wish you did explain how you built the frame step by step

Hi there , Can they ship to Europe ( Italy as well)

That weld on the manifold looks horrible (10:07). Great video on the entire build but that weld makes me question the remaining quality of the fire pit kit.

Nice but needs casters

Ok, I'm new to this. Where can I order the fire pit to install it to the diy concrete table?

@AndrewThronImprovements

2 жыл бұрын

Hi! I got my kit from EasyFirePits.com. Link in the description. Thanks for watching!

what was the overrall cost assuming you have all the tools?

How much did it cost you in material?

Where did you buy all the materials and how much did it cost overall?

@AndrewThronImprovements

2 жыл бұрын

Hi - I bought most of the stuff from home depot but I got the fire pit components from easyfirepits.com. I have links to everything in the video description. Thanks for watching! Appreciate the support!

How long does the gas tank last?

@AndrewThronImprovements

2 жыл бұрын

I would say probably for 20 hours of run time. But depends on how much you throttle the gas. Thanks for watching!

Do you think the LVT will hold up?

@AndrewThronImprovements

3 жыл бұрын

Hi Matt! I am not worried about the LVT at all, that stuff is super durable and waterproof. I am little worried about the longevity of the construction adhesive (I used exterior rated), but time will tell. I am covering it up before every rain, so hopefully that will help with the lifetime. Thanks for watching!

@limpfinger12

3 жыл бұрын

@@AndrewThronImprovements looks really good! Hopefully it stands up. Covering it will definitely help I'm sure. Been watching all your videos- getting ready to do a shower and that's how I found your channel!

@AndrewThronImprovements

3 жыл бұрын

@@limpfinger12 Fingers crossed! And right on, Man! Hope it turns out great!

How much would you estimate it cost you to make this?

@AndrewThronImprovements

2 жыл бұрын

Hi! It was definitely a bit pricey. I would estimate that you really would be hard pressed to complete this project for under $500. Between the propane, fire table insert kit, etc. It adds up pretty quick. But I love the table and use it all the time! Thanks for watching!

why would you 'calculate' the center rather than just draw lines between diagonal corners?!?

@AndrewThronImprovements

2 жыл бұрын

Haha fair point. They both get there but your method is probably a bit easier 👍

What are the base dimensions please?

Why was the table smoking like a real wood fire at the end of the video ?

@AndrewThronImprovements

2 жыл бұрын

I just noticed that after your comment. I couldn't tell you tbh. Smoke is never really an issue at all. That may have just been the angle/lighting. Thanks for watching!

Toller Handwerker

Sorry, but laying a propane tank (with the fill valve on top) on it's side is NOT the brightest idea and extremley dangerous too.

This KZreadr only copied MrFixIt DIY and just made it longer so it’s not obvious. Ref: kzread.info/dash/bejne/immCtq-jkavHnNY.html

@AndrewThronImprovements

2 жыл бұрын

Definitely took inspiration from a lot of the DIY KZreadrs! Thanks for watching!

I used Easyfirepits also. Working with them was easy and people are delightfully surprised by my fire table.